Paraffins continuous catalyst regeneration

The fluidized reactor system is similar to that of a refineiy FCC unit and consists of riser reactor, regenerator vessel, air compression, catalyst handling, flue-gas handling and feed and effluent heat recovery. Using this reactor system with continuous catalyst regeneration allows higher operating temperatures than with fixed-bed reactors so that paraffins, as well as olefins, are converted. The conversion of paraffins allows substantial quantities of paraffins in the feedstream and recycle of unconverted feed without need to separate olefins and paraffins. 

A new generation of so-called regenerative processes emerged with the development of multimetallic catalyst systems. They operate by continuous withdrawal and regeneration of the catalyst, which is then recycled to the reactors. This technology applies to the manufacture of gasoline and specifically to that of aromatics. This is because it can withstand more severe treatment conditions, which allow intensive cyclization of the paraffins, the removal of those that subsist by hydrocracking, and the hydrodealkylation of the heavier compounds,... 

Thus, it has been established that, although the lower members of the paraffin series are highly resistant to the action of cracking catalysts, the continuous formation of a carbon-catalyst linkage and the regeneration of the hydrocarbon from the carbonium ion occur quite readily. 

---