Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Paper finishing

Casein is used for a number of miscellaneous purposes in which foimolisation is not required. These include adhesives, stabilisers for rubber latex, paper finishing agents and miscellaneous uses in the textile industry. Mention may also be made of casein fibres, available in Italy between the two world wars under the name of Lanital. [Pg.859]

Uses. Intermediate in production of polymers, coatings, adhesives, textiles, and paper finishes... [Pg.609]

The membrane is covered with a 3 to 4 mm stack of dry filter paper. Finish the sandwich with a glass plate and wrap all with plastic foil. After incubation overnight in a refrigerator remove the membrane, wash with PBS and block with an appropriate buffer, e.g., 0.5% BSA in PBS, 30 min. [Pg.41]

Use Monomer for resins, solvent coatings, adhesives, oil additives emulsions for textiles, leather, and paper finishing. [Pg.201]

Use Textile and paper finishing, preservative for cosmetics source of formaldehyde. [Pg.837]

In the past casein plastics were widely used for decorative purposes due to its pleasant appearance. It was also used in the button industry as well as for making buckles, slides, hairpins, knitting pin pens and pencils. These include adhesives, stabilizers for rubber latex, paper finishing agents, and miscellaneous uses in the textile industry. [Pg.72]

Epotal 181 D. [BASF AG] Ethylene polymer dispersion additive to other dispersions improves slip, blocking resistance, and hydrophobic pn ierties of film in paper finishing, adhesives. [Pg.133]

Tables 34.1 and 34.2 show the results of the experiments for the specimens with the grinding paper finish and for the grit-blasted specimens, respectively. According to these results, the dismantlement of the specimens became easier with increasing weight fraction of the thermally expansive microcapsuies, and immersion in boiling water was more effective than keeping them in hot air. The specimens... Tables 34.1 and 34.2 show the results of the experiments for the specimens with the grinding paper finish and for the grit-blasted specimens, respectively. According to these results, the dismantlement of the specimens became easier with increasing weight fraction of the thermally expansive microcapsuies, and immersion in boiling water was more effective than keeping them in hot air. The specimens...
Table 34.1 Results of dismantlement tests on specimens with a grinding paper finish. ... Table 34.1 Results of dismantlement tests on specimens with a grinding paper finish. ...
Fig. 34.11 Fracture surfaces of single lap joints (a) with a grinding paper finish (b) with a grit-blasted finish. Fig. 34.11 Fracture surfaces of single lap joints (a) with a grinding paper finish (b) with a grit-blasted finish.
The next section describes the construction of the database that is used in the AAGE-model and is followed by a description of the AAGE-model. The scenarios are then described and the results analysed. The paper finishes with some conclusions. [Pg.347]

Uses Primers for materials such as metal/plastic/paper, finishing varnishes, protective varnishes, inks, adhesives, insulating coatings, conductive coatings... [Pg.31]

Uses Antifoam for papermaking and paper finishing defoamer for coating coiors for paper coatings Features Effective in aq. media Etingai L [BASF AG]... [Pg.344]

Uses Emulsifier, thickener, emollient, opacifier, oil gellant in creams, lotions, lipstick, makeup, depilatories, ointments, salves, sustained-release pharmaceuticals, furniture, wood, and leather polishes, leather, textile, wood, and paper finishes, candles, molding, lithography, noncosmetic emulsions flavoring agent, adjuvant lubricant, surf, finishing agent in foods... [Pg.462]

Uses Wax for polishes, cosmetics, medicinals (ointments, salves), candles, textile, leather, wood, and paper finishes, confectionery, modeling, engraving, acid etching, lithography, and emulsions Features For use where pure beeswax is not required Properties Yel. m.p. 130-143 F acid no. 1-5 sapon. no. 6-15 Ross Beeswax Substitute No. 30 [Frank B. Ross]... [Pg.704]


See other pages where Paper finishing is mentioned: [Pg.5]    [Pg.1047]    [Pg.226]    [Pg.11]    [Pg.342]    [Pg.144]    [Pg.656]    [Pg.62]    [Pg.226]    [Pg.562]    [Pg.743]    [Pg.5]    [Pg.226]    [Pg.463]    [Pg.95]    [Pg.565]    [Pg.565]    [Pg.567]    [Pg.342]    [Pg.139]    [Pg.704]   
See also in sourсe #XX -- [ Pg.1260 ]

See also in sourсe #XX -- [ Pg.226 ]

See also in sourсe #XX -- [ Pg.232 ]




SEARCH



Mold proofing treatment of finished paper

Paper finishes

Paper finishes

Paper polyester finished

© 2024 chempedia.info