Packed towers polymeric

Reaction in a Centrifugal Pump In the reaction between acetic acid and gaseous ketene to make acetic anhydride, the pressure must be kept low (0.2 atm) to prevent polymerization of ketene. A packed tower with low pressure drop could be used but the required volume is very large because of the low pressure. Spes (Chem. Ing. Tech., 38, 963-966 [1966]) selected a centrifugal pump reactor where... 

Efficient contact is produced between the phases in agitated gas-liquid contactors and, therefore, this type of equipment can also be useful for those absorption and stripping operations for which conventional plate or packed towers may not be suited. It may also be useful where the operation involves the contact of three phases—say, gas, liquid, and suspended solids. The latter application could be represented by the low-pressure polymerization of ethylene with solid catalysts (F5). 

Polymerization of propylene was done in a packed tower with the gas flowing countercurrently to 98% liquid phosphoric acid... 

Absorption and stripping are usually conducted in packed columns or in trayed towers. Packed columns are preferred when (1) the required column diameter is less than 60 cm (2) the pressure drop must be low, as for a vacuum service (3) corrosion considerations favor the use of ceramic or polymeric materials and/or (4) low liquid holdup is desirable. Trayed towers are preferred when (1) the liquid/gas ratio is very low, and (2) frequent cleaning is required. If there is no overriding consideration, cost is the major factor to be taken into account when choosing between packed columns and trayed towers for absorption or stripping. 

---