Package strength

Correctly labeled product in the wrong carton or package. Strength of product incorrectly labeled Microbial contamination of nonsterile products. Drug product marketed without an approved new or generic... 

Packaging is vital in maintaining the state of a sterile product up to the moment that the packaging is opened for withdrawal or use of the product. The regulator-ies expect manufacturers to test finished packages to confirm package strength,... 

Details of the product (Name of the product approved generic name(s) (use INN, if any) visual description of the product visual description of the packaging strength per unit dosage and dosage form) ... 

This test is very important for all films as well as for paper. High tear values may be needed for machine operations or for package strength. However, low tear values are necessary and useful for easy opening of some package types. 

Some of these software packages also have semiempirical or molecular mechanics functionality. However, the primary strength of each is ah initio calculation. There are also ah initio programs bundled with the Unichem, Spartan, and Hyperchem products discussed previously in this appendix. 

Lasdy, the importance of electroceramic substrates and insulators should not be overlooked. Here one strives to raise the breakdown strength by eliminating the interesting conduction mechanisms just described. Spark plugs, high voltage insulators, and electronic substrates and packages are made from ceramics like alumina, mullite [55964-99-3] and porcelain [1332-58-7]. 

Pentaerythritol in rosin ester form is used in hot-melt adhesive formulations, especially ethylene—vinyl acetate (EVA) copolymers, as a tackifier. Polyethers of pentaerythritol or trim ethyl ol eth an e are also used in EVA and polyurethane adhesives, which exhibit excellent bond strength and water resistance. The adhesives maybe available as EVA melts or dispersions (90,91) or as thixotropic, one-package, curable polyurethanes (92). Pentaerythritol spko ortho esters have been used in epoxy resin adhesives (93). The EVA adhesives are especially suitable for cellulose (paper, etc) bonding. 

Polyester sheet products may be produced from amorphous poly(ethylene terephalate) (PET) or partiaHy crystallized PET. Acid-modified (PETA) and glycol modified (PETG) resins are used to make ultraclear sheet for packaging. Poly(butylene terephthalate) (PBT) has also been used in sheet form. Liquid-crystal polyester resins are recent entries into the market for specialty sheet. They exhibit great strength, dimensional stabHity, and inertness at temperatures above 250°C (see Polyesters,thermoplastic). 

Some cast (unoriented) polypropylene film is produced. Its clarity and heat sealabiUty make it ideal for textile packaging and overwrap. The use of copolymers with ethylene improves low temperature impact, which is the primary problem with unoriented PP film. Orientation improves the clarity and stiffness of polypropylene film, and dramatically increases low temperature impact strength. BOPP film, however, is not readily heat-sealed and so is coextmded or coated with resins with lower melting points than the polypropylene shrinkage temperature. These layers may also provide improved barrier properties. 

Eoamed polystyrene sheet has exceUent strength, thermal resistance, formabUity, and shock resistance, as weU as low density. It is widely known for its use in beverage cups, food containers, building insulation panels, and shock absorbent packaging. Polystyrene products can be recycled if suitable coUection methods are estabUshed. Eoamed polystyrene sheet can also be easily therm oformed (see Styrene plastics). 

---