Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Oxidative activation sulfone-forming reactions

For example, the cobalt(II) complex for phthalocyanine tetrasodium sulfonate (PcTs) catalyzes the autoxidation of thiols, such as 2-mercaptoethanol (Eq. 1) [4] and 2,6-di(t-butyl)phenol (Eq. 2) [5]. In the first example the substrate and product were water-soluble whereas the second reaction involved an aqueous suspension. In both cases the activity of the Co(PcTs) was enhanced by binding it to an insoluble polymer, e.g., polyvinylamine [4] or a styrene - divinylbenzene copolymer substituted with quaternary ammonium ions [5]. This enhancement of activity was attributed to inhibition of aggregation of the Co(PcTs) which is known to occur in water, by the polymer network. Hence, in the polymeric form more of the Co(PcTs) will exist in an active monomeric form. In Eq. (2) the polymer-bound Co(PcTs) gave the diphenoquinone (1) with 100% selectivity whereas with soluble Co(PcTs) small amounts of the benzoquinone (2) were also formed. Both reactions involve one-electron oxidations by Co(III) followed by dimerization of the intermediate radical (RS or ArO ). [Pg.474]

The total antioxidant activity of teas and tea polyphenols in aqueous phase oxidation reactions has been deterrnined using an assay based on oxidation of 2,2 -azinobis-(3-ethylbenzothiazoline-sulfonate) (ABTS) by peroxyl radicals (114—117). Black and green tea extracts (2500 ppm) were found to be 8—12 times more effective antioxidants than a 1-mAf solution of the water-soluble form of vitamin E, Trolox. The most potent antioxidants of the tea flavonoids were found to be epicatechin gallate and epigallocatechin gallate. A 1-mAf solution of these flavanols were found respectively to be 4.9 and 4.8 times more potent than a 1-mAf solution of Trolox in scavenging an ABT radical cation. [Pg.373]

ButylatedPhenols and Cresols. Butylated phenols and cresols, used primarily as oxidation inhibitors and chain terrninators, are manufactured by direct alkylation of the phenol using a wide variety of conditions and acid catalysts, including sulfuric acid, -toluenesulfonic acid, and sulfonic acid ion-exchange resins (110,111). By use of a small amount of catalyst and short residence times, the first-formed, ortho-alkylated products can be made to predominate. Eor the preparation of the 2,6-substituted products, aluminum phenoxides generated in situ from the phenol being alkylated are used as catalyst. Reaction conditions are controlled to minimise formation of the thermodynamically favored 4-substituted products (see Alkylphenols). The most commonly used is -/ fZ-butylphenol [98-54-4] for manufacture of phenoHc resins. The tert-huty group leaves only two rather than three active sites for condensation with formaldehyde and thus modifies the characteristics of the resin. [Pg.372]

Alkylsulfonic acids are active oxidative agents like other organic peracids. Several oxidative reactions of seodecylsulfonic peracid were studied by Safiullin et al. [41]. Peracid was found to oxidize benzene to phenol as the first intermediate product. The formed sulfonic acid accelerates the reaction. Oxidation occurs according to the stoichiometric equation... [Pg.450]

The first step in the cycle, analogous to the cross-coupling reactions, is the oxidative addition of an aryl (vinyl) halide or sulfonate onto the low oxidation state metal, usually palladium(O). The second step is the coordination of the olefin followed by its insertion into the palladium-carbon bond (carbopalladation). In most cases palladium is preferentially attached to the sterically less hindered end of the carbon-carbon double bond. The product is released from the palladium in a / -hydrogen elimination and the active form of the catalyst is regenerated by the loss of HX in a reductive elimination step. To facilitate the process an equivalent amount of base is usually added to the reaction mixture. [Pg.21]


See other pages where Oxidative activation sulfone-forming reactions is mentioned: [Pg.506]    [Pg.212]    [Pg.716]    [Pg.325]    [Pg.1457]    [Pg.140]    [Pg.139]    [Pg.91]    [Pg.150]    [Pg.279]    [Pg.836]    [Pg.3472]    [Pg.210]    [Pg.218]    [Pg.338]    [Pg.110]    [Pg.390]    [Pg.252]    [Pg.215]    [Pg.296]    [Pg.300]    [Pg.291]    [Pg.1069]    [Pg.285]    [Pg.1069]    [Pg.700]    [Pg.221]    [Pg.95]    [Pg.400]    [Pg.134]    [Pg.769]    [Pg.144]    [Pg.537]    [Pg.449]    [Pg.485]    [Pg.572]    [Pg.205]    [Pg.291]    [Pg.449]    [Pg.485]    [Pg.572]    [Pg.291]    [Pg.300]   
See also in sourсe #XX -- [ Pg.182 ]




SEARCH



1-oxide sulfonation

Activated oxidation

Activation oxidation

Active oxides

Activity oxidation

Oxidation reactions activation

Oxidation sulfones

Oxidative activation

Oxides activated

Oxidizing activators

Reaction sulfonates

Sulfonation reaction

Sulfonation, oxidative

© 2024 chempedia.info