Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Oxidation recognizing

Structural classifications of oxides recognize discrete molecular species and structures which are polymeric in one or more dimensions leading to chains, layers, and ultimately, to three-dimensional networks. Some typical examples are in Table 14.14 structural details are given elsewhere under each individual element. The type of structure adopted in any particular case depends (obviously) not only on the... [Pg.641]

Industrial implementation of black liquor oxidation recognized the importance of effective gas-liquid mass transfer in the reaction. 8parged tank reactors are often used, with compartmentalized reaction zones to optimize reactor size given the reaction kinetics (Morgan and Murray, 1971 8haw and Christie, 1984). Pipeline reactors can also be used to oxidize black liquor but gas-liquor mass transfer is critical and it may be necessary to increase the gas-liquid mass transfer by using static mixers in some applications. [Pg.1190]

L. Ruthenia, Russia) Berzelius and Osann in 1827 examined the residues left after dissolving crude platinum from the Ural mountains in aqua regia. While Berzelius found no unusual metals, Osann thought he found three new metals, one of which he named ruthenium. In 1844 Klaus, generally recognized as the discoverer, showed that Osann s ruthenium oxide was very impure and that it contained a new metal. Klaus obtained 6 g of ruthenium from the portion of crude platinum that is insoluble in aqua regia. [Pg.108]

When freshly exposed to air, thallium exhibits a metallic luster, but soon develops a bluish-gray tinge, resembling lead in appearance. A heavy oxide builds up on thallium if left in air, and in the presence of water the hydride is formed. The metal is very soft and malleable. It can be cut with a knife. Twenty five isotopic forms of thallium, with atomic masses ranging from 184 to 210 are recognized. Natural thallium is a mixture of two isotopes. A mercury-thallium alloy, which forms a eutectic at 8.5% thallium, is reported to freeze at -60C, some 20 degrees below the freezing point of mercury. [Pg.144]

Terbium is reasonably stable in air. It is a silver-gray metal, and is malleable, ductile, and soft enough to be cut with a knife. Two crystal modifications exist, with a transformation temperature of 1289oC. Twenty one isotopes with atomic masses ranging from 145 to 165 are recognized. The oxide is a chocolate or dark maroon color. [Pg.189]

Planet Uranus) Yellow-colored glass, containing more than 1% uranium oxide and dating back to 79 A.D., has been found near Naples, Italy. Klaproth recognized an unknown element in pitchblende and attempted to isolate the metal in 1789. [Pg.200]

The ability to recognize when oxidation or reduction occurs is of value when decid mg on the kind of reactant with which an organic molecule must be treated to convert It into some desired product Many of the reactions to be discussed m subsequent chap ters involve oxidation-reduction... [Pg.89]

You will recognize the side chain oxidation of p xylene to terephthahc acid as a reaction type discussed previously (Section 11 13) Examples of other reactions encoun tered earlier that can be applied to the synthesis of carboxylic acids are collected m Table 19 4... [Pg.806]

A selected list of redox indicators will be found in Table 8.26. A redox indicator should be selected so that its if" is approximately equal to the electrode potential at the equivalent point, or so that the color change will occur at an appropriate part of the titration curve. If n is the number of electrons involved in the transition from the reduced to the oxidized form of the indicator, the range in which the color change occurs is approximately given by if" 0.06/n volt (V) for a two-color indicator whose forms are equally intensely colored. Since hydrogen ions are involved in the redox equilibria of many indicators, it must be recognized that the color change interval of such an indicator will vary with pH. [Pg.1160]

Electrolytic Manganese Dioxide. The anodic oxidation of an Mn(II) salt to manganese dioxide dates back to 1830, but the usefuhiess of electrolyticaHy prepared manganese dioxide for battery purposes was not recognized until 1918 (69). Initial use of electrolytic manganese dioxide (EAfD) for battery use was ia Japan (70) where usage continues. [Pg.512]

Galen, a physician whose views outUved him by about a thousand years, died about 200 AD. He beUeved that mercurials were toxic, and did not use any mercury compound therapeutically. However, as a result of Arabian influence, the therapeutic uses of mercury were slowly recognized by Western Europe. In the thirteenth century mercury ointments were prescribed for treating chronic diseases of the skin. Mercury and its compounds, such as mercurous chloride, mercuric oxide, mercuric chloride, and mercuric sulfide, were used widely from the fifteenth to the nineteenth centuries, and to some extent in the twentieth century. During the first half of the twentieth century, the primary therapeutic uses of mercury included bactericidal preparations, such as mercuric chloride, mercuric oxycyanide, and mercuric oxide and diuretics, such as aryl HgX (Novasural) and mercurated ahyl derivatives (14). [Pg.116]

Considerable interest has been shown ia poly(ethylene oxide) for diverse appHcations ia food, drug, and cosmetic products. Such uses fall within the scope of the Federal Food, Dmg, and Cosmetic Act. The U.S. FDA has recognized and approved the use of poly(ethylene oxide) for specific food and food packaging uses. USP/NF-grades of Polyox water-soluble resins (Union Carbide Corp.) are available for pharmaceutical appHcations. [Pg.344]

Silicon [7440-21-3] Si, from the Latin silex, silicis for flint, is the fourteenth element of the Periodic Table, has atomic wt 28.083, and a room temperature density of 2.3 gm /cm. SiUcon is britde, has a gray, metallic luster, and melts at 1412°C. In 1787 Lavoisier suggested that siUca (qv), of which flint is one form, was the oxide of an unknown element. Gay-Lussac and Thenard apparently produced elemental siUcon in 1811 by reducing siUcon tetrafluoride with potassium but did not recognize it as an element. In 1817 BerzeHus reported evidence of siUcon occurring as a precipitate in cast iron. Elemental siUcon does not occur in nature. As a constituent of various minerals, eg, siUca and siUcates such as the feldspars and kaolins, however, siUcon comprises about 28% of the earth s cmst. There are three stable isotopes that occur naturally and several that can be prepared artificially and are radioactive (Table 1) (1). [Pg.524]


See other pages where Oxidation recognizing is mentioned: [Pg.200]    [Pg.441]    [Pg.200]    [Pg.441]    [Pg.405]    [Pg.477]    [Pg.922]    [Pg.1792]    [Pg.511]    [Pg.51]    [Pg.194]    [Pg.203]    [Pg.396]    [Pg.191]    [Pg.67]    [Pg.79]    [Pg.128]    [Pg.203]    [Pg.216]    [Pg.549]    [Pg.164]    [Pg.63]    [Pg.217]    [Pg.100]    [Pg.125]    [Pg.342]    [Pg.380]    [Pg.139]    [Pg.108]    [Pg.490]    [Pg.115]    [Pg.240]    [Pg.348]    [Pg.443]    [Pg.472]    [Pg.482]    [Pg.432]    [Pg.248]    [Pg.424]   
See also in sourсe #XX -- [ Pg.205 , Pg.209 ]




SEARCH



Oxidation number recognizing

Oxidizing agent recognizing

© 2024 chempedia.info