Organic hydrogen/hydrocarbon separation

The neutralized cleavage product, consisting of acetone, phenol, water, hydrocarbons, and trace organic impurities, is separated in a series of distillation columns. Also in this section alpha-methylstyrene is either recovered as a product or hydrogenated to cumene. 

Coal Liquefaction, Steam is used to produce hydrogen for the liquefaction of coal. In the liquefaction process, coal is crushed, dried, pulverized, and then added to a solvent to produce a slurry. The slurry is heated, usually in the presence of hydrogen to dissolve the coal. The extract is cooled to remove hydrogen, hydrocarbon gases, and hydrogen sulfide. The liquid is then flashed at low pressure to separate condensable vapors from the extract. Mineral matter and organic soHds are separated and used to produce hydrogen for the process. The extract may be desulfurized. The solvent is separated from the products. There are at least six different liquefaction processes (see Coal conversion process, liquefaction Fuels, synthetic-liquid fuels). 

Natural gas feedstock is very dependent of the source location in some cases it has high levels of H2S, CO2 and hydrocarbons. Organic sulfur compounds must be removed because they will irreversibly deactivate both reforming and WGS catalysts. Hence a preliminary feed desulfurization step is necessary. This process consists in a medium-pressure hydrogenation (usually on a cobalt-molybdenum catalyst at 290-370 °C), which reduces sulfur compounds to H2S, followed by H2S separation through ZnO adsorption (at 340-390 °C) or amine absorption [9]. 

Let us start out by a few comments about the terms used to describe carbon skeletons encountered in organic molecules. When considering a hydrocarbon (i.e., a compound consisting of only C and H) or a hydrocarbon group (i.e., a hydrocarbon substituent) in a molecule, the only possible functionalities are carbon-carbon double and triple bonds. A carbon skeleton is said to be saturated if it has no double or triple bond, and unsaturated if there is at least one such bond present. Hence, in a hydrocarbon, the term saturated indicates that the carbon skeleton contains the maximum number of hydrogen atoms compatible with the requirement that carbon always forms four bonds and hydrogen one. A saturated carbon atom is one that is singly bound to four other separate atoms. 

The vast material of the chemical reduction of C02 that has accumulated since the 1970s or so will be divided here, according to the reduction methods, into two parts heterogeneous and homogeneous hydrogenations. Further organization is based on the degree of reduction specifically, processes to afford formic acid and its derivatives, formaldehyde, methanol, and methane and other hydrocarbons will be treated separately. 

---