Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Ores, digestion methods

There are three basic methods of converting poUucite to cesium metal or compounds direct reduction with metals decomposition with bases and acid digestion. In each case grinding of the ore to 75 p.m precedes conversion. [Pg.375]

Two processes are used in the manufacture of titanium dioxide pigments the sulfate process and the chloride process. The chemistry of the sulfate process, the longer established of the two methods, is illustrated schematically in Scheme 9.1. In this process, crude ilmenite ore, which contains titanium dioxide together with substantial quantities of oxides of iron, is digested with concentrated sulfuric acid, giving a solution containing the sulfates of Ti(iv), Fe(m) and Fe(n). Treatment of this... [Pg.151]

Detection.—Apart from naturally occurring ores of vanadium, vanadium steels, and ferrovanadium, the commonest compounds of vanadium are those which contain the element in the pentavalent state, viz. the pentoxide and the various vanadates. The analytical reactions usually employed are, therefore, those which apply to vanadates. Most vanadium ores can be prepared for the application of these reactions by digesting with mineral acids or by alkaline fusion with the addition of an oxidising agent. When the silica content is high, preliminary treatment with hydrofluoric acid is recommended. Vanadium steels and bronzes, and ferrovanadium, are decomposed by the methods used for other steels the drillings are, for instance, dissolved in sulphuric acid and any insoluble carbides then taken up in nitric acid, or they are filtered off and submitted to an alkaline fusion. Compounds of lower valency are readily converted into vanadates by oxidation with bromine water, sodium peroxide, or potassium permanganate. [Pg.109]

An older Be method, P CAM 121, discusses air, dust, ore, and swipe samples. More vigorous digestion procedures such as hydrofluoric nitric acid for filters or potassium fluoride sodium pyrosulfate fusion and nitric acid digestion for ores. A nitrous oxide/acetylene flame is suggested for this method rarely used (Table HI). [Pg.246]

Inorganic Samples. Wet digestion, fusion, and pressure dissolution are common methods for the dissolution of metals, slags, ores, minerals, rocks, cements, and other inorganic materials and products. If the final solutions contain more than about 0.5% of dissolved material, the standards should also contain the major constituents in order to match the viscosity and surface tension. [Pg.218]


See other pages where Ores, digestion methods is mentioned: [Pg.140]    [Pg.335]    [Pg.140]    [Pg.76]    [Pg.284]    [Pg.49]    [Pg.629]    [Pg.671]    [Pg.929]    [Pg.36]    [Pg.305]    [Pg.410]    [Pg.129]    [Pg.914]    [Pg.284]    [Pg.269]    [Pg.914]    [Pg.344]    [Pg.139]    [Pg.147]    [Pg.154]    [Pg.1205]    [Pg.7059]    [Pg.1238]    [Pg.6]    [Pg.18]    [Pg.168]    [Pg.139]    [Pg.141]    [Pg.147]    [Pg.154]    [Pg.4267]    [Pg.4306]    [Pg.219]    [Pg.75]    [Pg.251]    [Pg.62]    [Pg.193]    [Pg.3]    [Pg.307]   
See also in sourсe #XX -- [ Pg.230 ]




SEARCH



Digestion methods

© 2024 chempedia.info