Optical Filtration

All the screens investigated can be created in one unit by using a liquid 

Liquid crystal modulators, placed on the plane, where the Fourier image of the object is formed (Fig. 8.10), are widely used as one of the important parts of optical correlators [60] used, in particular, in real-time object tracking systems [61]. Liquid crystal modulators could be made as a-Si H-FLC light valves [62] or TV modules [61, 63], working in a special video feedback regime. 

---

When fluorochromes are combined in a multiparameter assay, it is almost always necessary to correct for signals from overlapping portions of emission spectra that have not been eliminated by optical filtration. This is accomplished through a spectral compensation procedure that is performed according to instrument-specific instructions, and involves the adjustment of detector voltages to electronically subtract extraneous fluorescence. 

The calcium carbonate precipitate was removed by filtration, and the filtered solution was found to contain 1,436 g of fructose as determined by optical rotation. A small amount of calcium bicarbonate was present as an impurity in solution and was removed by the addition of oxalic acid solution until a test for both calcium and oxalic acid was negative. The insoluble calcium oxalate precipitate was removed by filtration. 

Then, as described in U.S. Patent 3,158,648, the optical isomers may be resolved as follows. 37 g of racemic a-methYl-3,4-dihYdroxYphenylalanine are slurried at 35°C in 100 cc of 1.0 N hydrochloric acid. The excess solids are filtered leaving a saturated solution containing 34.6 g of racemic amino acid of which about 61% is present as the hydrochloride. The solution Is then seeded at 35°C with 7 g of hydrated L-o -methYl-3,4-dihYdroxYphenYlalanine (6.2 g of anhydrous material). The mixture is then cooled to 20°C in 30 minutes and aged one hour at 20°C. The separated material Is isolated by filtration, washed twice with 10 cc of cold water and dried in vacuo. The yield of product is 14.1 g of L-a-methYl-3,4-di-hydroxyphenylalanine in the form of a sesquihydrate of 100% purity as determined by the rotation of the copper complex. 

Fick s law 592 Filter funnel 102 Filter papers 115 folding of, 116 incineration of, 120, 121 macerated, 450 quantitative, (T) 116 Filter pulp 450 Filtering crucibles 102 Filters, optical 661 Filtration 102, 106, 115 accelerated, 450 technique of, 116, 117 with filter papers, 116 with filtering crucibles, 117 Flame emission spectroscopy 779, 797 background correction, 795 elementary theory of, 780 D. of alkali metals by, 812... 

When a mixture of methyl phenyl sulfide (69a) (1 g, 8.1 mmol), 30% H2O2 (1.84 g, 16.2 mmol), and water (10 ml) was stirred at room temperature for 24 h, rac-lOa was produced (Scheme 11). To the water suspension medium of rac-70a was added 10c (2 g, 4 mmol), and the mixture was stirred for 15 h to give a 1 1 inclusion complex of 10c with (+)-70a. Heating the filtered complex in vacuo gave (+)-70a of 57% ee (0.45 g, 82% yield). From the filtrate left after separation of the inclusion complex, (-)-70a of 54% ee (0.4 g, 73% yield) was obtained by extraction with ether. By the same procedure, optically active 70b-d were also prepared (Table 11). In the case of (+)-70b and (-)-70c,the efficiency of the enantiomeric resolution was very high. 

Experiments in 500 ml Erlenmeyer flasks and Fernbach flasks contained 200 ml and 1 L of EPl and EP2 medium respectively. Inocuia added to these cultures was 2 ml of spore suspension (5.0 optical density at 540 nm) for each 100 ml EP medium. All cultures were grown at 37°C in a shaking incubator (New Brunswik Sci. Co., USA), at 200 rpm. Then 10 ml of sample were withdrawn each 24 h during fermentation and immediately filtered through Millipore membranes of 0.45 pm pore size these cell-free filtrates were used for enzymatic assays and extracellular protein determinations by the Lowry method (14). Experiments in the 14 L fermentor (Microgen Fermentor New Brunswik Sci. Co., USA) were carried with lOL of fermentation medium EP2 and inoculum added was IL of mycelium grown 24 h in... 

Almqvist and coworkers have developed a two-step synthesis of optically active 2-pyridones via thiazolines (Scheme 6.216) [388]. Thus, heating a suspension of (R)-cysteine methyl ester hydrochloride with 2 equivalents of an imino ether and 2 equivalents of triethylamine base in 1,2-dichloroethane at 140 °C for 3 min furnished the desired thiazolines in near quantitative yield with limited racemization. Purification by filtration through a short silica gel column and concentration of the filtrate gave a crude product, which was used directly in the next step. Thus, after... 

Berndt et al. [740] have shown that traces of bismuth, cadmium, copper, cobalt, indium, nickel, lead, thallium, and zinc could be separated from samples of seawater, mineral water, and drinking water by complexation with the ammonium salt of pyrrolidine- 1-dithiocarboxylic acid, followed by filtration through a filter covered with a layer of active carbon. Sample volumes could range from 100 ml to 10 litres. The elements were dissolved in nitric acid and then determined by atomic absorption or inductively coupled plasma optical emission spectrometry. 

The optical properties of bottles are a matter of crystallinity affected by nucle-ation, depending on the content and size of light-scattering polymer solids. The purity of the raw materials and the cleanness of the reactors are prerequisites for satisfactory quality. Bottle polymer should display as little contaminations as possible. The detection of impurities is carried out by the same methods as mentioned above. Thorough filtration of the polymer is therefore mandatory. It should... 

The one-pot dynamic kinetic resolution (DKR) of ( )-l-phenylethanol lipase esterification in the presence of zeolite beta followed by saponification leads to (R)-l phenylethanol in 70 % isolated yield at a multi-gram scale. The DKR consists of two parallel reactions kinetic resolution by transesterification with an immobilized biocatalyst (lipase B from Candida antarctica) and in situ racemization over a zeolite beta (Si/Al = 150). With vinyl octanoate as the acyl donor, the desired ester of (R)-l-phenylethanol was obtained with a yield of 80 % and an ee of 98 %. The chiral secondary alcohol can be regenerated from the ester without loss of optical purity. The advantages of this method are that it uses a single liquid phase and both catalysts are solids which can be easily removed by filtration. This makes the method suitable for scale-up. The examples given here describe the multi-gram synthesis of (R)-l-phenylethyl octanoate and the hydrolysis of the ester to obtain pure (R)-l-phenylethanol. 

To overcome this issue Kureshy et al. [55, 56] reported dimeric form of Jacobsen s catalysts 3, 4. They used the concept of solubility modification by altering the molecular weight of the catalyst so that in a post catalytic work-up procedure the catalyst is precipitated, filtered and used for subsequent catalytic runs. The complexes 3, 4 (0.2 mol % of Co(lll)-salen unit) (Figure 2) were effectively used for HKR of racemic epoxides, e.g., styrene oxide, epichlorohydrin, 1,2-epoxypropane, 1,2-epoxyhexane, 1,2-epoxyoctane, and 1,2-epoxydodecane to achieve corresponding epoxides and 1,2-diols in high optical purity and isolated yields. In this process, once the catalytic reaction is complete the product epoxides were collected by reduced pressure distillation. Addition of diethylether to the residue precipitated the catalyst which was removed by filtration. However, the recovered catalyst was required to be reactivated by its treatment with acetic acid in air. The catalysts were reused 4 times with complete retention of its performance. 

In 1990, Isono et al. reported the isolation of RK-286C (318) from the culture filtrate and the mycelium extract of Streptomyces sp. RK-286 (303). In nature, this isolate was obtained in its optically active form [a]p -I- 45.3 (c 0.22, EtOAc). Based on similar CD curves, the absolute configuration of this isolate was assigned to be similar to that of (-E)-staurosporine (295) (see Scheme 2.74) (284). RK-286C has shown PKC inhibitory activity and platelet aggregation in vitro, as well as weak antifungal activity (303). 

---