Octadienes 1,7-octadiene

HOaQCHjlfiCOiH, CSH14O4. Important dicarboxylic acid obtained by oxidizing ricino-leic acid (from castor oil) also obtained by oxidation of cyclo-octene or cyclo-octadiene formerly obtained from cork. Used in the formation of alkyd resins and polyamides. Esters are used as plasticizers and heavy duty lubricants and oils. 

An active catalytic species in the dimerization reaction is Pd(0) complex, which forms the bis-7r-allylpalladium complex 3, The formation of 1,3,7-octa-triene (7) is understood by the elimination of/5-hydrogen from the intermediate complex 1 to give 4 and its reductive elimination. In telomer formation, a nucleophile reacts with butadiene to form the dimeric telomers in which the nucleophile is introduced mainly at the terminal position to form the 1-substituted 2,7-octadiene 5. As a minor product, the isomeric 3-substituted 1,7-octadiene 6 is formed[13,14]. The dimerization carried out in MeOD produces l-methoxy-6-deuterio-2,7-octadiene (10) as a main product 15]. This result suggests that the telomers are formed by the 1,6- and 3,6-additions of MeO and D to the intermediate complexes I and 2. 

The reaction of isoprene with MeOH catalyzed by Pd(acac)2 and Ph3P is not regioselective, giving a mixture of isomers[37]. However, l-methoxy-2,6-dimethyl-2,7-octadiene (35), the head-to-tail dimer, was obtained in 80% yield, accompanied by the tail-to-tail dimer (15%) using 7r-allylpalladium chloride and BU3P. On heating, 35 was converted into 2.6-dimethyl-1,3,7-octatriene (36) by an elimination reaction[38]. 

Formic acid behaves differently. The expected octadienyl formate is not formed. The reaction of butadiene carried out in formic acid and triethylamine affords 1,7-octadiene (41) as the major product and 1,6-octadiene as a minor product[41-43], Formic acid is a hydride source. It is known that the Pd hydride formed from palladium formate attacks the substituted side of tt-allylpalladium to form the terminal alkene[44] (see Section 2.8). The reductive dimerization of isoprene in formic acid in the presence of Et3N using tri(i)-tolyl)phosphine at room temperature afforded a mixture of dimers in 87% yield, which contained 71% of the head-to-tail dimers 42a and 42b. The mixture was treated with concentrated HCl to give an easily separable chloro derivative 43. By this means, a- and d-citronellol (44 and 45) were pre-pared[45]. 

Active methylene or methine compounds, to which two EWGs such as carbonyl, alko.xycarbonyl, formyl, cyano, nitro, and sulfonyl groups are attached, react with butadiene smoothly and their acidic hydrogens are displaced with the 2,7-octadienyl group to give mono- and disubstituted compounds[59]. 3-Substituted 1,7-octadienes are obtained as minor products. The reaction is earned out with a /3-keto ester, /9-diketone, malonate, Q-formyl ketones, a-cyano and Q-nitro esters, cya noacetamide, and phenylsulfonylacetate. Di(octadienyl)malonate (61) obtained by this reaction is converted into an... 

Simple ketones and esters are inert. On the other hand, nitroalkanes react smoothly in r-butyl alcohol as a solvent with butadiene, and their acidic hydrogens are displaced with the octadienyl group. From nitromethane, three products, 64, 65, and 66, are formed, accompanied by 3-substituted 1,7-octadiene as a minor product. Hydrogenation of 65 affords a fatty amine 67 which has a primary amino function at the center of the long linear chain[46,61]. 

The reaction of hydrosilanes with butadiene is different from other reactions. Different products are obtained depending on the structurelof the hydrosilanes and the reaction conditions. Trimethylsiiane and other trialkylsilanes react to give the I 2 adduct, namely the l-trialkylsilyl-2,6-octadiene 74, in high yields[67-69]. Unlike other telomers which have the 2,7-octadienyl chain, the 2,6-octadienyl chain is formed by hydrosilylation. On the other hand, the 1 I adduct 75 (l-trichlorosilyl-2-butene)is formed selectively with trichlorosilane, which is more reactive than trialkylsilanes[69]. The Reaction gives the Z form stereoselectively[70]. A mixture of the I 1 and I 2 adducts (83.5 and 5.2%) is... 

Acetoxy-l,7-octadiene (40) is converted into l,7-octadien-3-one (124) by hydrolysis and oxidation. The most useful application of this enone 124 is bisannulation to form two fused six-membered ketonesfl 13], The Michael addition of 2-methyl-1,3-cyclopentanedione (125) to 124 and asymmetric aldol condensation using (5)-phenylalanine afford the optically active diketone 126. The terminal alkene is oxidi2ed with PdCl2-CuCl2-02 to give the methyl ketone 127 in 77% yield. Finally, reduction of the double bond and aldol condensation produce the important intermediate 128 of steroid synthesis in optically pure form[114]. 

These trivial names may be retained citral (3,7-dimethyl-2,6-octadienal), vanillin (4-hydroxy-3-methoxybenzaldehyde), and piperonal (3,4-methylenedioxybenzaldehyde). 

TALONIC ACID AND DERIVATIVES] (Vol 15) 2(R)-3(S)-4(E)-6(E)-8-amino-3-methoxy-2,4-dimethyl-4,6-octadienal... 

A telomerization reaction of isoprene can be carried out by treatment with 2-chloro-3-pentene, prepared by the addition of dry HCl to 1,3-pentadiene (67). An equimolar amount of isoprene in dichi oromethane reacts with the 2-chloro-3-pentene at 10°C with stannic chloride as catalyst. l-Chloro-3,5-dimethyl-2,6-octadiene is obtained in 80% yield by 1,4-addition. 

From West Indian lime oil, a trace low Foiling constituent, 1-methyl-1,3-(or 1,5 /74< 5 -3 7- -cyclohexadiene has been characterized (27). This compound, which possesses an intense and characteristic lime aroma, was later confirmed to be the 1,3-isomer [1489-56-1] (11). This compound can easily be made in a biomimetic way through the reaction of citral [5392-40-5] (3,7-dimethyl-2,6-octadienal) with citric acid (28,29). 

Some of the most difficult heterophase systems to characterize are those based on hydrocarbon polymers such as mbber-toughened polypropylene or other blends of mbbers and polyolefins. Eecause of its selectivity, RuO staining has been found to be usehil in these cases (221,222,230). Also, OsO staining of the amorphous blend components has been reported after sorption of double-bond-containing molecules such as 1,7-octadiene (231) or styrene (232). In these cases, the solvent is preferentially sorbed into the amorphous phase, and the reaction with OsO renders contrast between the phases. 

Dihydromyrcene Manufacture. 2,6-Dimethyl-2,7-octadiene, commonly known as dihydromyrcene (24) or citroneUene, is produced by the pyrolysis of pinane, which can be made by hydrogenation of a- or P-pinene (101). If the pinene starting material is optically active, the product is also optically active (102). The typical temperature for pyrolysis is about 550—600°C and the cmde product contains about 50—60% citroneUene. Efficient fractional distUlation is requited to produce an 87—90% citroneUene product. 

Linear dimeri2ation and oligomeri2ation of butadiene can be achieved by using a number of catalyst systems based on Pd, Ni (158—161), and Fe (162). 1,7-Octadiene can be obtained selectively when the dimeri2ation is carried out in the presence of a reducing agent such as formic acid (163—165) or H2/CO2 (166). 

It is generally assumed that the boat transition state is higher in,energy than the chair transition state. There have been several studies aimed at determining the energy difference between the two transition states. One study involved 1,1,1,8,8,8 eu/cno-4,5-dimethyl-2,6-octadienes. Different stereoisomeric products would be predicted for the chair and boat transition states ... 

Octadiene-3,5-diyne-l, 8-dimethoxy-9-octadecynoic acid Octogen (dry)... 

Studies of solvolysis of similar polyfluonnated polycyclic aromatic systems, such as 2,3-(tetrafluorobenzo)bicyclo[2 2 2]octadienes and related compounds, proved the ionic mechanism of this rearrangement [55, 36, 37] (equation 9) Possible nonclassical carbonium ion involvement has been discussed [5S, 39, 40, 41]... 

---