Nucleation method homogeneous

CRP/LRP methods have been applied in miniemulsion polymerization as it offers some unique technical advantages over an emulsion polymerization and can be regarded as a simpli ed model of emulsion polymerization, in which, ideally, all monomer droplets (of 50-500 nm size) are nucleated by entering aqueous oligoradicals and become polymer particles, while no new particles are nucleated by homogeneous nucleation, thus leading to simpler kinetic behavior. 

Nomura et al. [74,75] proposed an experimental method to study the competitive particle nucleation mechanisms (micellar nucleation versus homogeneous nucleation) in a given emulsion polymerization system. This approach involves the emulsion copolymerization of relatively hydrophobic styrene with relatively hydrophilic monomers such as methyl methacrylate or methyl acrylate. The composition of copolymer produced during the very early stage of polymerization (far lower than 1% monomer conversion), which reflects the characteristic of copolymer at the locus of particle nucleation, is then determined. Emulsion copolymerization of styrene with methyl methacrylate (or methyl acrylate) was carried out, where sodium dodecyl sulfate was used to stabilize the emulsion polymerization system and where the weight ratio of styrene to methyl methacrylate (or methyl acrylate) was kept constant at 1 1. The experimental results show that the compositions of copolymers obtained from emulsion polymerizations in the presence and absence of monomer-swollen micelles are quite different. This provides supporting evidence of the generally accepted Smith-Ewart theory that micellar nucleation controls the particle nucleation process in the emulsion copolymerization of styrene with... 

Generally speaking, homogeneous nucleation needs the supersaturation level higher than heterogeneous one. In the system consisting of support solid and metal salt solution, the nucleation occurs on the surfaces of the solid. The selective reductive deposition is performed by the adsorption of metal ion or complexes on the surfaces and hereby the reduction. Namely, the initial adsorption of metal ions or complexes is the key point of this technique. Hence, key points of this method are... 

Using this thermodynamic picture, classic nucleation and growth theory was used to describe the phase transformation that occurs in these materials, despite the relatively unique synthesis method that is employed. The governing equation for homogeneous nucleation that describes the change in free energy associated with the formation of a spherical crystalline nucleus in an amorphous host is as follows ... 

---