Nitroxide mediated polymerization addition-fragmentation chain

Hawker et al. 2001 Hawker and Wooley 2005). Recent developments in living radical polymerization allow the preparation of structurally well-defined block copolymers with low polydispersity. These polymerization methods include atom transfer free radical polymerization (Coessens et al. 2001), nitroxide-mediated polymerization (Hawker et al. 2001), and reversible addition fragmentation chain transfer polymerization (Chiefari et al. 1998). In addition to their ease of use, these approaches are generally more tolerant of various functionalities than anionic polymerization. However, direct polymerization of functional monomers is still problematic because of changes in the polymerization parameters upon monomer modification. As an alternative, functionalities can be incorporated into well-defined polymer backbones after polymerization by coupling a side chain modifier with tethered reactive sites (Shenhar et al. 2004 Carroll et al. 2005 Malkoch et al. 2005). The modification step requires a clean (i.e., free from side products) and quantitative reaction so that each site has the desired chemical structures. Otherwise it affords poor reproducibility of performance between different batches. 

The controlled emulsion polymerization of styrene using nitroxide-mediated polymerization (NMP), reversible addition-fragmentation transfer polymerization (RAFT), stable free radical polymerization (SFR), and atom transfer radical polymerization (ATRP) methods is described. The chain transfer agent associated with each process was phenyl-t-butylnitrone, nitric oxide, dibenzyl trithiocarbonate, 1,1-diphenylethylene, and ethyl 2-bromo-isobutyrate, respectively. Polydispersities between 1.17 and 1.80 were observed. 

The first step for the core-first stars is the synthesis of multifunctional initiators. Since it is difficult to prepare initiators that tolerate the conditions of ionic polymerization, mostly the initiators are designed for controlled radical polymerization. Calixarenes [39, 58-61], sugars (glucose, saccharose, or cyclodextrins) [62-68], and silsesquioxane NPs [28, 69] have been employed as cores for various star polymers. For the growth of the arms, mostly controlled radical polymerizations were used. There are only very rare cases of stars made from nitroxide-mediated radical polymerization (NMRP) [70] or reversible addition-fragmentation chain transfer (RAFT) techniques [71,72], In the RAFT technique one has to differentiate between approaches where the chain transfer agent is attached by its R- or Z-function. ATRP is the most frequently used technique to build various star polymers [27, 28],... 

The development of controlled radical polymerization (CRP) methods,(1,2) including atom transfer radical polymerization (ATRP),(3-6) nitroxide-mediated radical polymerization,(7) and reversible addition fragmentation chain transfer polymerization,(8,9) has led to the synthesis of an unprecedented number of novel, previously inaccessible polymeric materials. Well-defined polymers, i.e., polymers with predetermined molecular weight, narrow molecular weight distribution, and high degree of chain end functionalization, prepared by... 

Controlled/ Living radical polymerization (CRP) of vinyl acetate (VAc) via nitroxide-mediated polymerization (NMP), organocobalt-mediated polymerization, iodine degenerative transfer polymerization (DT), reversible radical addition-fragmentation chain transfer polymerization (RAFT), and atom transfer radical polymerization (ATRP) is summarized and compared with the ATRP of VAc catalyzed by copper halide/2,2 6 ,2 -terpyridine. The new copper catalyst provides the first example of ATRP of VAc with clear mechanism and the facile synthesis of poly(vinyl acetate) and its block copolymers. 

VAc has been successfully polymerized via controlled/ living radical polymerization techniques including nitroxide-mediated polymerization, organometallic-mediated polymerization, iodine-degenerative transfer polymerization, reversible radical addition-fragmentation chain transfer polymerization, and atom transfer radical polymerization. These methods can be used to prepare well-defined various polymer architectures based on PVAc and poly(vinyl alcohol). The copper halide/t is an active ATRP catalyst for VAc, providing a facile synthesis of PVAc and its block copolymers. Further developments of this catalyst will be the improvements of catalytic efficiency and polymerization control. 

Controlled Radical Polymerization (CRP) is the most recently developed polymerization technology for the preparation of well defined functional materials. Three recently developed CRP processes are based upon forming a dynamic equilibrium between active and dormant species that provides a slower more controlled chain growth than conventional radical polymerization. Nitroxide Mediated Polymerization (NMP), Atom Transfer Radical Polymerization (ATRP) and Reversible Addition Fragmentation Transfer (RAFT) have been developed, and improved, over the past two decades, to provide control over radical polymerization processes. This chapter discusses the patents issued on ATRP initiation procedures, new functional materials prepared by CRP, and discusses recent improvements in all three CRP processes. However the ultimate measure of success for any CRP system is the preparation of conunercially viable products using acceptable economical manufacturing procedures. 

In the field of living radical polymerization, MALDI-TOF has been highly useful for characterization of polymers prepared by nitroxide-mediated radical polymerization (NMRP) [35, 36], atom transfer radical polymerization (ATRP) [37], and reversible addition-fragmentation chain transfer polymerization (RAFT) [38, 39]. The modern MALDI-TOF-MS permits fast and accurate determination of a variety of polymer characteristics [40]. 

Besides the ATRP method, other controlled radical polymerization techniques such as reversible addition/fragmentation chain transfer polymerization (RAFT) (Zhang et al., 2007) and nitroxide-mediated polymerization (NMP) (Yoshida and Ohta, 2005), have also been explored to synthesize azo BCs. 

Taking into account all of the above mentioned applications, the synthesis of magnetic latex will be discussed in two parts first, the preparation of iron oxide nanoparticles and, second, the preparation of magnetic latex. Depending on the aim of researchers, many polymerization techniques are applied such as suspension, dispersion, emulsion, microemulsion and miniemulsion polymerization in combination with controlled radical polymerization techniques like atom transfer radical polymerization (ATRP), reversible addition-fragmentation chain transfer (RAFT) and nitroxide-mediated radical polymerization (NMP). The preparation of hybrid magnetic latex by emulsion polymerization will be the focus of this review. 

In this review, the term macromer is used to describe oligomer or polymer precursors that undergo reversible association to form supramolecular polymers or networks. Macromer synthesis, although a crucial aspect of supramolecular science, is also out of the scope of this review. Several comprehensive reviews of the synthesis of H-bonding polymers are available [10, 11,42] and primarily describe the application of controlled radical polymerization techniques, including atom-transfer radical polymerization (ATRP), reversible addition-fragmentation chain transfer (RAFT) polymerization, and nitroxide-mediated polymerization (NMP). For synthesis of telechelic polymers, avoiding monofunctional impurities that can act as chain stoppers is crucially important [43],... 

M. C. lovu, C. R. Craley, M. Jeffries-EL, A. B. Krankowski, R. Zhang, T. Kowalewski, R. D. McCullough, Conducting Regioregular Polythiophene Block Copolymer Nanofibrils Synthesized by Reversible Addition Fragmentation Chain Transfer Polymerization (RAFT) and Nitroxide Mediated Polymerization (NMP). Macromolecules 2007,40,4733-4735. 

SCHEME 9.2 Main control equilibria in atom transfer radical polymerization (ATRP), reversible addition-fragmentation chain transfer (RAFT) polymerization, and nitroxide-mediated pol3fmerization (NMP). 

Figure 8 Main mechanistic transformation reactions in living and/or controlled polymerization methods. ATRP, atom transfer radical polymerization RAFT, reversible addition-fragmentation chain transfer NMRP, nitroxide-mediated free radical polymerization CROP, cationic ring-opening polymerization AROP, anionic ring-opening poiymerization.

---