Nitriles, enolates, reactions

Michael Addition. Titanium imide enolates are excellent nucleophiles in Michael reactions. Michael acceptors such as ethyl vinyl ketone, Methyl Acrylate, Acrylonitrile, and f-butyl acrylate react with excellent diastereoselection (eq 21 ). - Enolate chirality transfer is predicted by inspection of the chelated (Z)-enolate. For the less reactive unsaturated esters and nitriles, enolates generated from TiCl3(0-j-Pr) afford superior yields, albeit with slightly lower selectivities. The scope of the reaction fails to encompass p-substituted, a,p-unsaturated ketones which demonstrate essentially no induction at the prochiral center. Furthermore, substimted unsamrated esters do not act as competent Michael acceptors at all under these conditions. 

The following example is an intramolecular reaction similar to the aldol reaction. A deprotonated nitrile (nitrile enolate) acts as a nucleophile and adds via an AdN to another nitrile. The acidic water workup is the reverse of imine formation. Section 10.5.2. 

B.iv. Nitrile Enolates. Nitrile enolates are formed by reaction of a nitrile with LDA or another suitable base. Both alkylation 30 and condensation reactions with aldehydes 3 or ketones are known. 32 in addition to alkyl halides and carbonyl derivatives, condensation can occur with another nitrile. The base-catalyzed condensation of two nitriles to give a cyano-ketone, via an intermediate cyano enolate, is known as the Thorpe reaction. 33.109e Reaction of butanenitrile with sodium ethoxide gave a nitrile enolate, which reacted with a second molecule of butanenitrile at the electrophilic cyano carbon to give 206. Hydrolysis gave an intermediate imine-nitrile (207), which is in equilibrium with the enamine form (208, sec. 9.6.A). Hydrolysis led to the final product of the Thorpe reaction, an a-cyano ketone, 209. 33 Mixed condensations are possible when LDA and kinetic conditions are used to generate the a-lithionitrile (a mixed Thorpe reaction). When pentanenitrile was treated with LDA and condensed with benzonitrile, 2-cyano-l-phenyl-1-pentanone was the isolated product after acid hydrolysis. Nitrile enolates can also be alkylated with a variety of alkyl halides. 34... 

Nitrile enolates can also react with carbonyl derivatives such as oxalate, which serves as a carboxyl surrogate. Reaction of 2-phenylacetonitrile and diethyl oxalate, in the presence of sodium amide, gave 4.99. " Catalytic hydrogenation of the cyano group and hydrolysis led to ethyl 2-phenyl-3-aminopropanoate, 4.100. In this case also, the nitrile moiety was an amine surrogate. Other a-aryl acetonitrile derivatives... 

A novel use of a wide range of nitriles as mediator has enabled the regioselective inter-molecular addition of unstabilized zinc ester enolates to 1-alkynes and l.S-enynes. " This reaction was made possible by a reversible addition of enolates to a nitrile (Blaise reaction), generating a zinc aza-enolate that, unlike zinc ester enolates, can add inter-molecularly to 1-alkynes and 1,3-enynes. Subsequent removal of the nitrile through a retro-Blaise reaction has generated the targeted addition product. 

Shibasaki and Kanai developed a catalytic enantioselective nitrile aldol reaction using CuOf-Bu-DTBM-SEGPHOS complex as a catalyst (Fig. 3) [27] (for other reports of direct catalytic nitrile aldol reactions, see [31, 32]). Despite moderate enantioselectivity, it is noteworthy that chemoselective generatimi of an enolate equivalent (copper ketene imide 6 in Fig. 4) is possible from acetonitrile in the presence of aldehydes containing more acidic a-protons. The pATa values of a-protons of acetonitrile and aliphatic aldehydes are 31.3 and ca. 23 (in DMSO), respectively. Key for the selective deprotonation from acetonitrile is the chemoselective interaction between soft Cu(I) and soft nitrile, which selectively acidifies a-protons of acetonitrile (Fig. 4, 5). 

Thus the sodio derivative (I) of the enol form of ethyl acetoacetate is obtained. This mechanism can clearly apply also to the condensation of an ester with a suitable ketone or nitrile, as in the above reactions (ii) and (iii) respectively. 

A classical way to achieve regioselectivity in an (a -i- d -reaction is to start with a-carbanions of carboxylic acid derivatives and electrophilic ketones. Most successful are condensations with 1,3-dicarbonyl carbanions, e.g. with malonic acid derivatives, since they can be produced at low pH, where ketones do not enolize. Succinic acid derivatives can also be de-protonated and added to ketones (Stobbe condensation). In the first example given below a Dieckmann condensation on a nitrile follows a Stobbe condensation, and selectivity is dictated by the tricyclic educt neither the nitrile group nor the ketone is enolizable (W.S. Johnson, 1945, 1947). 

Inductive and resonance stabilization of carbanions derived by proton abstraction from alkyl substituents a to the ring nitrogen in pyrazines and quinoxalines confers a degree of stability on these species comparable with that observed with enolate anions. The resultant carbanions undergo typical condensation reactions with a variety of electrophilic reagents such as aldehydes, ketones, nitriles, diazonium salts, etc., which makes them of considerable preparative importance. 

Substitution reactions by the ionization mechanism proceed very slowly on a-halo derivatives of ketones, aldehydes, acids, esters, nitriles, and related compounds. As discussed on p. 284, such substituents destabilize a carbocation intermediate. Substitution by the direct displacement mechanism, however, proceed especially readily in these systems. Table S.IS indicates some representative relative rate accelerations. Steric effects be responsible for part of the observed acceleration, since an sfp- caibon, such as in a carbonyl group, will provide less steric resistance to tiie incoming nucleophile than an alkyl group. The major effect is believed to be electronic. The adjacent n-LUMO of the carbonyl group can interact with the electnai density that is built up at the pentacoordinate carbon. This can be described in resonance terminology as a contribution flom an enolate-like stmeture to tiie transition state. In MO terminology,.the low-lying LUMO has a... 

The alkylation reactions of enolate anions of both ketones and esters have been extensively utilized in synthesis. Both very stable enolates, such as those derived from (i-ketoesters, / -diketones, and malonate esters, as well as less stable enolates of monofunctional ketones, esters, nitriles, etc., are reactive. Many aspects of the relationships between reactivity, stereochemistry, and mechanism have been clarified. A starting point for the discussion of these reactions is the structure of the enolates. Because of the delocalized nature of enolates, an electrophile can attack either at oxygen or at carbon. 

Enolates of aldehydes, ketones, and esters and the carbanions of nitriles and nitro compounds, as well as phosphorus- and sulfur-stabilized carbanions and ylides, undergo the reaction. The synthetic applications of this group of reactions will be discussed in detail in Chapter 2 of Part B. In this section, we will discuss the fundamental mechanistic aspects of the reaction of ketone enolates with aldehydes md ketones. 

In a manner analogous to classic nitrile iinines, the additions of trifluoro-methylacetonitrile phenylimine occur regiospecifically with activated terminal alkenes but less selectively with alkynes [39], The nitnle imine reacts with both dimethyl fumarate and dimethyl maleate m moderate yields to give exclusively the trans product, presumably via epimenzation of the labile H at position 4 [40] (equation 42) The nitrile imine exhibits exo selectivities in its reactions with norbornene and norbornadiene, which are similar to those seen for the nitrile oxide [37], and even greater reactivity with enolates than that of the nitnle oxide [38, 41], Reactions of trifluoroacetomtrile phenyl imine with isocyanates, isothiocyanates, and carbodiimides are also reported [42]... 

The experimental conditions for the syntheses starting from acid chlorides of hydroxamic acids and from nitrile oxides are somewhat different. In the former case the other component of the reaction is organometallic, usually an organomagnesium derivative of an acetylene or, less frequently, a sodium enolate of a /8-diketone. Nitrile oxides condense directly with unsaturated compounds. 

The early stages of the reaction of the quaternary salt can be regarded as proceeding in a manner exactly analogous to that by which the isoxazoles themselves are degraded, the j8-oxoketene imine structure (148) being one mesomeric form of a compound which could alternatively be formulated as a nitrilium betaine. However, by contrast with the products from the isoxazoles (i.e., enolates of /3-keto-nitriles), this is electrically neutral and susceptible to further nucleophilic attack. 

A thioamide of isonicotinic acid has also shown tuberculostatic activity in the clinic. The additional substitution on the pyridine ring precludes its preparation from simple starting materials. Reaction of ethyl methyl ketone with ethyl oxalate leads to the ester-diketone, 12 (shown as its enol). Condensation of this with cyanoacetamide gives the substituted pyridone, 13, which contains both the ethyl and carboxyl groups in the desired position. The nitrile group is then excised by means of decarboxylative hydrolysis. Treatment of the pyridone (14) with phosphorus oxychloride converts that compound (after exposure to ethanol to take the acid chloride to the ester) to the chloro-pyridine, 15. The halogen is then removed by catalytic reduction (16). The ester at the 4 position is converted to the desired functionality by successive conversion to the amide (17), dehydration to the nitrile (18), and finally addition of hydrogen sulfide. There is thus obtained ethionamide (19)... 

A two-step sequence of nitrile oxide-olehn cycloaddition and reduction of the resulting A -isoxazolines offers a unique and attractive alternative to the classical aldol reaction and its many variants (2J). The procedure bypasses traditional problems, including enolate equilibrium and cross condensation (20). 

Many types of carbonyl compounds, including aldehydes, ketones, esters, thioesters, acids, and amides, can be converted into enolate ions by reaction with LDA. Table 22.1 lists the approximate pKa values of different types of carbonyl compounds and shows how these values compare to other acidic substances we ve seen. Note that nitriles, too, are acidic and can be converted into enolate-like anions. 

Ketones, esters, and nitriles can all be alkylated using LDA or related dialkyl-amide bases in THE. Aldehydes, however, rarely give high yields of pure products because their enolate ions undergo carbonyl condensation reactions instead of alkylation. (We ll study this condensation reaction in the next chapter.) Some specific examples of alkylation reactions are shown. 

An alkylation reaction is used to introduce a methyl or primary alkyl group onto the a position of a ketone, ester, or nitrile by S 2 reaction of an enolate ion with an alkyl halide. Thus, we need to look at the target molecule and identify any methyl or primary alkyl groups attached to an a carbon. In the present instance, the target has an a methyl group, which might be introduced by alkylation of an ester enolate ion with iodomethane. 

Alpha hydrogen atoms of carbonyl compounds are weakly acidic and can be removed by strong bases, such as lithium diisopropylamide (LDA), to yield nucleophilic enolate ions. The most important reaction of enolate ions is their Sn2 alkylation with alkyl halides. The malonic ester synthesis converts an alkyl halide into a carboxylic acid with the addition of two carbon atoms. Similarly, the acetoacetic ester synthesis converts an alkyl halide into a methyl ketone. In addition, many carbonyl compounds, including ketones, esters, and nitriles, can be directly alkylated by treatment with LDA and an alkyl halide. 

Ketones and carboxylic esters can be a hydroxylated by treatment of their enolate forms (prepared by adding the ketone or ester to LDA) with a molybdenum peroxide reagent (MoOs-pyridine-HMPA) in THF-hexane at -70°C. The enolate forms of amides and estersand the enamine derivatives of ketones can similarly be converted to their a hydroxy derivatives by reaction with molecular oxygen. The M0O5 method can also be applied to certain nitriles. Ketones have also been Qc hydroxylated by treating the corresponding silyl enol ethers with /n-chloroperoxy-... 

Among the compounds capable of forming enolates, the alkylation of ketones has been most widely studied and applied synthetically. Similar reactions of esters, amides, and nitriles have also been developed. Alkylation of aldehyde enolates is not very common. One reason is that aldehydes are rapidly converted to aldol addition products by base. (See Chapter 2 for a discussion of this reaction.) Only when the enolate can be rapidly and quantitatively formed is aldol formation avoided. Success has been reported using potassium amide in liquid ammonia67 and potassium hydride in tetrahydrofuran.68 Alkylation via enamines or enamine anions provides a more general method for alkylation of aldehydes. These reactions are discussed in Section 1.3. 

---