Nickel alloys bromide

Cinnamaldehyde, by reduction of cinna-monitrile with Raney nickel alloy in formic acid, 51,25 from the ester-mesylate, 51,76 Cinnamic acid, 50,18 CINNAMONITRILE, 50,18 Condensation, of p-acetylbenzenediazo-nium bromide with acrylic acid, 51,1... 

Catalyst prepared from 1.9 g of Raney nickel alloy, which is modified with 0.67 mol of (R,/f)-tartartie acid and 10 g of sodium bromide in 100 mL of water66. Reactions carried out in 23 mL of methyl propanoate, with 0.2 mL of HOAc added, for 5 h at 100 C using a H, pressure of 100 bar. b mmol of substrate. 

Rubidium metal alloys with the other alkaU metals, the alkaline-earth metals, antimony, bismuth, gold, and mercury. Rubidium forms double haUde salts with antimony, bismuth, cadmium, cobalt, copper, iron, lead, manganese, mercury, nickel, thorium, and 2iac. These complexes are generally water iasoluble and not hygroscopic. The soluble mbidium compounds are acetate, bromide, carbonate, chloride, chromate, fluoride, formate, hydroxide, iodide. 

Methyl bromide, when dry (<100 ppm water), is inert toward most materials of constmction. Carbon steel is recommended for storage vessels, piping, pumps, valves, and fittings. Copper, brass, nickel, and its alloys are sometimes used. Aluminum, magnesium, zinc, and alloys of these metals should not be used because under some conditions dangerous pyrophoric compounds may be formed. Many nonmetallic materials are also useful for handling methyl bromide, but nylon and polyvinyl chloride should be avoided. 

There are few reports of oxidative addition to zerovalent transition metals under mild conditions three reports involving group 10 elements have appeared. Fischer and Burger reported the preparation of aTT -allylpalladium complex by the reaction of palladium sponge with allyl bromide(63). The Grignard-type addition of allyl halides to aldehydes has been carried out by reacting allylic halides with cobalt or nickel metal prepared by reduction of cobalt or nickel halides with manganese/iron alloy-thiourea(64). 

Nickel barium titanium primrose priderite, formula and DCMA number, 7 347t Nickel-based alloys, properties of, 77 848t Nickel-base superalloys, 77 103 Nickel battery technology, 77 111 Nickel-beryllium alloys, 3 656-659 Nickel-boron deposition, 9 693-695, 708 Nickel brass, corrosion, 7 812 Nickel bromide, 77 110... 

Galvanic corrosion or bimetallic corrosion is important to consider since most of the structural industrial metals and even the metallic phases in the microstructure alloys create galvanic cells between them and/or the a Mg anodic phase. However, these secondary particles which are noble to the Mg matrix, can in certain circumstances enrich the corrosion product or the passive layer, leading to a decrease or a control of the corrosion rate. Severe corrosion may occur in neutral solutions of salts of heavy metals, such as copper, iron and nickel. The heavy metal, the heavy metal basic salts or both plate out to form active cathodes on the anodic magnesium surface. Small amounts of dissolved salts of alkali or alkaline-earth metal (chlorides, bromides, iodides and sulfates) in water will break the protective film locally and usually lead to pitting (Froats et al., 1987 Shaw and Wolfe, 2005). 

---