Morphology molecular

Zlatanova, J., Leuba, S.H., and van Holde, K. (1998) Chromatin fiber structure morphology, molecular determinants, structural transitions. Biophys. J. 74, 2554-2566. 

Not only may the rate of cooling be slow it also may vary from one part of the moulding to another, and this can have marked effects on the crystalline morphology, molecular orientation, shrinkage—and consequently on the qualities and appearance of products. If, for example, the rate of crystallization differs in different parts of a moulding the sizes of crystals also will differ, and its clarity will be impaired. 

The properties of PAn s, such as electrical conductivity, morphology, molecular weight, and stereoregularity, are sensitive to the polymerizing conditions employed. On the basis of extensive studies, the influence of various polymerization conditions on the properties of ESs (PAn/HA) are summarized in the following sections. 

Miettinen M, Lasota J. Gastrointestinal stromal tumors review on morphology, molecular pathology, prognosis, and differential diagnosis. Arch Pathol Lab Med. 2006 130 1466-1478. 

Variations in the adsorption properties of the substrate lead to the changes of the mechanism of nucleation, morphology, molecular structure and wetting ability of PTFE films respectively. 

S. Saengsuwan, S. Bualek-Limcharoen, G. R. Mitchell, and R. H. Olley. Thermotropic liquid crystalline polymer (Rodrun LC5000)/polypropylene in situ composite films Rheology, morphology, molecular orientation and tensile properties. Polymer, 44 3407-3415, 2003. 

S.-Y., Hackstein, J.H.P. (2003). Endemic ciiiates (Protozoa, Ciliophora) from tank bromeliads (Bromeliaceae) a combined morphological, molecular, and ecological study. European Journal of Protistology 39, 365-372. 

Substrate, Morphology Molecular Conductivity Mobility Temperature Orientation (Sem ) (cm V ls-O... 

The morphology, molecular orientation and ultrasonic moduli of extruded blends of polycarbonate (PC) and Vectra B have been studied by Choy et al [10]. We will denote these blends by PC + VBX where X is the weight percent of Vectra B in the blend. 

The changes in the morphology, molecular weight distribution, desrease of melting temperature and crystallinity with absorbed dose are related to the radiation processes in pure iPP. 

Alignment method (gap treatment) + method of analyses 1. Manual + MP ratchet 2. DO 3. DO (gaps as ) + MP ratchet 4. Manual + ML 1. Manual + MP ratchet (incl. only molecular data) 2. DO (incl. only molecular data) 3. DO (incl. morphology + molecular data) 1. Manual + MP ratchet... 

Chae B, Kim SB, Lee SW, Kim SI, Choi W, Lee B. Surface Morphology, Molecular Reorientation, and Liquid Crystal Alignment Properties of Rubbed Nanofilms of a Well-Defined Brush Polyimide with a Fully Rodlike Backbone. Macromolecules 2002 35 10119-10130. 

TPs are plastics that soften when heated and upon cooling harden into products. TPs can be repeatedly softened by reheating. Their morphology, molecular structure, is crystalline or amorphous. Softening temperatures... 

Turbeville, J.M., Schulz, J.R. and Raff, R.A. (1994) Deuterostome phylogeny and the sister group of chordates evidence from molecules and morphology , Molecular Biology and Evolution, 11, 648-55. 

The deterioration influences the physical and chemical properties, such as morphology, molecular weight, tensile strength, elongation at break and colour. 

---