Monomers nitrogen dioxide

Reference methods for criteria (19) and hazardous (20) poUutants estabHshed by the US EPA include sulfur dioxide [7446-09-5] by the West-Gaeke method carbon monoxide [630-08-0] by nondispersive infrared analysis ozone [10028-15-6] and nitrogen dioxide [10102-44-0] by chemiluminescence (qv) and hydrocarbons by gas chromatography coupled with flame-ionization detection. Gas chromatography coupled with a suitable detector can also be used to measure ambient concentrations of vinyl chloride monomer [75-01-4], halogenated hydrocarbons and aromatics, and polyacrylonitrile [25014-41-9] (21-22) (see Chromatography Trace and residue analysis). 

Dinitrogen Tetroxide.—The dimer of nitrogen dioxide is not very stable its enthalpy of formation from the monomer is 13.873 kcal/mole. The molecule is found in both the crystal (x-ray diffraction)29 and the gas (electron diffraction)80 to be planar, with orthorhombic symmetry. The N—N bond length reported for the crystal is 1.64 A. The value for the gas molecule, 1.75 A, is probably somewhat more accurate.81 This value is 0.28 A greater than the single-bond value found for hydrazine the bond number of the bond is accordingly about 0.34 (Equation 7-7). 

The oxidation of cyclohexanone by nitric acid leads to the generation of nitrogen dioxide, nitric oxide, and nitrous oxide. The first two gases can be recycled for the synthesis of nitric acid. Nitrous oxide, however, is an ozone depleter and cannot be recycled. Indiscriminate nitrous oxide emission from this process is therefore the cause of considerable concern. As shown by 8.9, part of the cyclohexanone can also be converted to the corresponding oxime and then to caprolactam—the monomer for nylon 6. Phthalic acids are one of the monomers for the manufacture of polyesters. As shown by Eq. 8.10, it is made by the oxidation of p-xylene. A general description of polyamides (nylons) and polyesters are given in Section 8.4. 

The monomer N02 has an impaired electron and its properties, red-brown color, and ready dimerization to colorless and diamagnetic N204, are not unexpected for such a radical. Nitrogen dioxide can also lose its odd electron fairly readily (AHioa = 928 kJ mol-1) to give N02, the nitronium ion, discussed later. 

At low temperature, both nitrogen monoxide and nitrogen dioxide form crystalline NN bonded dimers. A mixed dimer, N2O3, has also been prepared. Evaporation yield mixtures of associated and unassociated species, and the structures of both monomers and dimers have determined by spectroscopic techniques. 

Initiators, usually from 0.02 to 2.0 wt % of the monomer of organic peroxides or azo compounds, are dissolved in the reaction solvents and fed separately to the kettie. Since oxygen is often an inhibitor of acryUc polymerizations, its presence is undesirable. When the polymerization is carried out below reflux temperatures, low oxygen levels are obtained by an initial purge with an inert gas such as carbon dioxide or nitrogen. A blanket of the inert gas is then maintained over the polymerization mixture. The duration of the polymerization is usually 24 h (95). 

The first-order decomposition rates of alkyl peroxycarbamates are strongly influenced by stmcture, eg, electron-donating substituents on nitrogen increase the rate of decomposition, and some substituents increase sensitivity to induced decomposition (20). Alkyl peroxycarbamates have been used to initiate vinyl monomer polymerizations and to cure mbbers (244). They Hberate iodine quantitatively from hydriodic acid solutions. Decomposition products include carbon dioxide, hydrazo and azo compounds, amines, imines, and O-alkyUiydroxylarnines. Many peroxycarbamates are stable at ca 20°C but decompose rapidly and sometimes violently above 80°C (20,44). 

Impurities in water treatment chemicals halogenated hydrocarbons in chlorine, oxides of nitrogen from ozonators, chlorates and chlorites from chlorine dioxide, acrylamide monomers. 

---