Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Molybdenum complexes oxidation

Early catalysts for acrolein synthesis were based on cuprous oxide and other heavy metal oxides deposited on inert siHca or alumina supports (39). Later, catalysts more selective for the oxidation of propylene to acrolein and acrolein to acryHc acid were prepared from bismuth, cobalt, kon, nickel, tin salts, and molybdic, molybdic phosphoric, and molybdic siHcic acids. Preferred second-stage catalysts generally are complex oxides containing molybdenum and vanadium. Other components, such as tungsten, copper, tellurium, and arsenic oxides, have been incorporated to increase low temperature activity and productivity (39,45,46). [Pg.152]

A significant outlet for TBHP is the molybdenum-complex cataly2ed production of propylene oxide, a process developed by Oxirane (221—224). [Pg.344]

Benzene-Based Catalyst Technology. The catalyst used for the conversion of ben2ene to maleic anhydride consists of supported vanadium oxide [11099-11-9]. The support is an inert oxide such as kieselguhr, alumina [1344-28-17, or sUica, and is of low surface area (142). Supports with higher surface area adversely affect conversion of benzene to maleic anhydride. The conversion of benzene to maleic anhydride is a less complex oxidation than the conversion of butane, so higher catalyst selectivities are obtained. The vanadium oxide on the surface of the support is often modified with molybdenum oxides. There is approximately 70% vanadium oxide and 30% molybdenum oxide [11098-99-0] in the active phase for these fixed-bed catalysts (143). The molybdenum oxide is thought to form either a soUd solution or compound oxide with the vanadium oxide and result in a more active catalyst (142). [Pg.455]

The addition of an oxygen atom to an olefin to generate an epoxide is often catalyzed by soluble molybdenum complexes. The use of alkyl hydroperoxides such as tert-huty hydroperoxide leads to the efficient production of propylene oxide (qv) from propylene in the so-called Oxirane (Halcon or ARCO) process (79). [Pg.477]

The selective oxidation is catalyzed by silver, which is the only good catalyst. Other olefins are not converted selectively to the epoxides in the presence of silver. However, propylene epoxidation is appHed commercially the catalysts are either molybdenum complexes in solution or soHd Ti02—Si02 (see... [Pg.181]

Porphyrin, octaethyl-, molybdenum hydroxide oxide complex... [Pg.42]

Molybdenum hexacarbonyl [Mo(CO)6] has been vised in combination with TBHP for the epoxidation of terminal olefins [44]. Good yields and selectivity for the epoxide products were obtained when reactions were performed under anhydrous conditions in hydrocarbon solvents such as benzene. The inexpensive and considerably less toxic Mo02(acac)2 is a robust alternative to Mo(CO)6 [2]. A number of different substrates ranging from simple ot-olefms to more complex terpenes have been oxidized with very low catalytic loadings of this particular molybdenum complex (Scheme 6.2). The epoxidations were carried out with use of dry TBHP (-70%) in toluene. [Pg.196]

Molybdenum, tris(phenylenedithio)-structure, 1,63 Molybdenum alkoxides physical properties, 2,346 synthesis, 2,339 Molybdenum blue liquid-liquid extraction, 1,548 Molybdenum cofactor, 6,657 Molybdenum complexes acrylonitrile, 2,263 alkoxides, 3,1307 alkoxy carbonyl reactions, 2,355 alkyl, 3,1307 alkyl alkoxy reactions, 2,358 alkyl peroxides oxidation catalyses, 6,342 allyl, 3,1306... [Pg.166]

Scheme 11). Alternatively the quaternary salts can be converted thermally into acyliron chelate complexes which can then be oxidized to azetidinones (Scheme 12). Extension of the method to the synthesis of a condensed azetidinone is illustrated in Scheme 13, but the scope of the procedure has not been evaluated. It will also be of interest to assess the utility of other cationic organometallic complexes preliminary studies have shown that molybdenum complexes behave in an analogous manner but the oxidative cyclization is inefficient (Scheme 14). [Pg.328]

Johnson and Pilson [229] have described a spectrophotometric molybdenum blue method for the determination of phosphate, arsenate, and arsenite in estuary water and sea water. A reducing reagent is used to lower the oxidation state of any arsenic present to +3, which eliminates any absorbance caused by molybdoarsenate, since arsenite will not form the molybdenum complex. This results in an absorbance value for phosphate only. [Pg.107]

The formation of molybdenum complexes with diols (formed by olefin oxidation) was proved for the use of the molybdenum catalysts. Therefore, the participation of these complexes in the developed epoxidation reaction was assumed [242]. [Pg.417]

Despite many applications of the iron-mediated carbazole synthesis, the access to 2-oxygenated tricyclic carbazole alkaloids using this method is limited due to the moderate yields for the oxidative cyclization [88,90]. In this respect, the molybdenum-mediated oxidative coupling of an arylamine and cyclohexene 2a represents a complementary method. The construction of the carbazole framework is achieved by consecutive molybdenum-mediated C-C and C-N bond formation. The cationic molybdenum complex, required for the electrophilic aromatic substitution, is easily prepared (Scheme 23). [Pg.132]

Electrophilic substitution of 3-methoxy-4-methylaniline 64 by the complex salt 62 leads to the molybdenum complex 65. Oxidative cyclization of complex... [Pg.133]

Electrophilic substitution of 3-methoxy-4-methylaniline (655) by the complex 663 leads to the molybdenum complex 664. Oxidative cyclization of complex 664 with concomitant aromatization using activated commercial manganese dioxide provides 2-methoxy-3-methylcarbazole (37) in 53% yield (560). In contrast, cyclization of the corresponding tricarbonyliron complex to 37 was achieved in a maximum yield of 11 % on a small scale using iodine in pyridine as the oxidizing agent (see Scheme 5.49). [Pg.225]

Reaction of the 5-aminochromene 1044 with the complex salt 577 provided via an electrophilic aromatic substitution regio- and diastereoselectively the molybdenum complex 1050. The oxidative cyclization of complex 1050 with concomitant aromatization and demetalation using activated manganese dioxide led directly to girinimbine (115) in 50% yield. Oxidation of girinimbine (115) with DDQ in methanol afforded murrayacine (124) in 64% yield (660) (Scheme 5.161). [Pg.293]


See other pages where Molybdenum complexes oxidation is mentioned: [Pg.523]    [Pg.83]    [Pg.241]    [Pg.113]    [Pg.45]    [Pg.809]    [Pg.907]    [Pg.178]    [Pg.236]    [Pg.48]    [Pg.160]    [Pg.292]    [Pg.260]    [Pg.16]    [Pg.133]    [Pg.10]    [Pg.5]    [Pg.144]    [Pg.145]    [Pg.281]    [Pg.391]    [Pg.426]    [Pg.428]    [Pg.432]    [Pg.137]    [Pg.204]    [Pg.205]    [Pg.389]    [Pg.575]    [Pg.391]    [Pg.426]    [Pg.428]    [Pg.432]   
See also in sourсe #XX -- [ Pg.1246 , Pg.1251 , Pg.1283 , Pg.1309 ]

See also in sourсe #XX -- [ Pg.330 ]

See also in sourсe #XX -- [ Pg.330 ]

See also in sourсe #XX -- [ Pg.3 , Pg.1246 , Pg.1251 , Pg.1271 , Pg.1283 ]




SEARCH



Molybdenum complexes oxidation catalysts

Molybdenum complexes oxidation/reduction

Molybdenum complexes oxidative addition

Molybdenum complexes porphyrin, oxidation

Oxidation states molybdenum dioxo complexes

Oxides molybdenum oxide

© 2024 chempedia.info