Molded-material surface measurement

This review of the biocompatibility of polymeric surfaces concentrates on the observed differences of hydrophilic, hydrophobic, and heterogenic materials as measured by their interactions with proteins and platelets. Emphasis is placed on materials for use in injection molding applications. 

In a molded polymer blend, the surface morphology results from variations in composition between the surface and the bulk. Static SIMS was used to semiquan-titatively provide information on the surface chemistry on a polycarbonate (PC)/polybutylene terephthalate (PBT) blend. Samples of pure PC, pure PBT, and PC/PBT blends of known composition were prepared and analyzed using static SIMS. Fn ment peaks characteristic of the PC and PBT materials were identified. By measuring the SIMS intensities of these characteristic peaks from the PC/PBT blends, a typical working curve between secondary ion intensity and polymer blend composition was determined. A static SIMS analysis of the extruded surface of a blended polymer was performed. The peak intensities could then be compared with the known samples in the working curve to provide information about the relative amounts of PC and PBT on the actual surface. 

---