Critical moisture

The absorption of moisture critically affects other important resin properties, particularly those associated with low-dielectric and thermomechanical applications. Results of a 96-h boiling water immersion test are presented in Table 2.2. The moisture absorbed decreased substantially with fluoromethylene chain length from n = 3 to n = 6, followed by only modest decreases for n = 8 and 10. This latter behavior was somewhat unexpected and may be the effect of decreased cross-link density counteracting the increased fluorine content. These 100°C measurements are just above the glass transition and the situation may be different at room temperature. These measurements are in progress. 

Oil Content %) Nonfat Content %) Moisture %) Critical Moisture %)... 

Supercritical Fluid Extraction. Supercritical fluid (SCF) extraction is a process in which elevated pressure and temperature conditions are used to make a substance exceed a critical point. Once above this critical point, the gas (CO2 is commonly used) exhibits unique solvating properties. The advantages of SCF extraction in foods are that there is no solvent residue in the extracted products, the process can be performed at low temperature, oxygen is excluded, and there is minimal protein degradation (49). One area in which SCF extraction of Hpids from meats maybe appHed is in the production of low fat dried meat ingredients for further processed items. Its apphcation in fresh meat is less successful because the fresh meat contains relatively high levels of moisture (50). 

The critical property for conformal coatings is resistance to chemicals, moisture, and abrasion. Other properties, such as the coefficient of thermal expansion, thermal conductivity, flexibiHty, and modulus of elasticity, are significant only in particular appHcations. The dielectric constant and loss tangent of the conformal coating are important for high speed appHcations. 

Because mass flow bins have stable flow patterns that mimic the shape of the bin, permeabihty values can be used to calculate critical, steady-state discharge rates from mass flow hoppers. Permeabihty values can also be used to calculate the time required for fine powders to settle in bins and silos. In general, permeabihty is affected by particle size and shape, ie, permeabihty decreases as particle size decreases and the better the fit between individual particles, the lower the permeabihty moisture content, ie, as moisture content increases, many materials tend to agglomerate which increases permeabihty and temperature, ie, because the permeabihty factor, K, is inversely proportional to the viscosity of the air or gas in the void spaces, heating causes the gas to become more viscous, making the sohd less permeable. 

Because the mechanical properties of hydrophilic fibers are critically dependent on moisture regain, it is vital that such fibers be tested under constant conditions of temperature and humidity. Standard conditions used in the textile industry are 65% relative humidity and 21°C (1,2,21,96). ASTM D1909, D2118, and D2720 Hst accepted commercial moisture regain values used in the buying and selling of fibers. 

The smoothing or emoUient properties of creams and lotions are critical for making these emulsions the preferred vehicles for facial skin moisturizers, skin protectants, and rejuvenating products. On the body, emoUients provide smoothness and tend to reduce the sensation of tightness commonly associated with dryness and loss of Hpids from the skin. Although a wide variety of plant and animal extracts have been claimed to impart skin benefits, vaUd scientific evidence for efficacy has been provided only rarely. 

Studies of the interactions between water and the Hpid constituents of the stratum corneum suggest that the supply of water per se is not responsible for skin quaHty and condition. Water vapor from lower layers provides a constant supply of moisture to the epidermis. Instead, the abiHty of the skin to retain the moisture is critical, and this abiHty depends on the HpidlameUar bilayers that occupy the spaces between the ceUs of the stratum corneum (44—46). 

Critical moisture content is that obtained when the constant rate period ends and the falling rate periods begin. Second critical moisture content specifies that remaining in a porous material when capillary flow dominance is replaced by vapor diffusion. 

---