Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Mode I interlaminar fracture

ISO 14130 1997 Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method ISO 15024 2001 Fibre-reinforced plastic composites - Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials... [Pg.174]

Fig. 3.30. Schematic illustrations of Mode I interlaminar fracture test specimens (a) DCB specimen (b)... Fig. 3.30. Schematic illustrations of Mode I interlaminar fracture test specimens (a) DCB specimen (b)...
ASTM D 5528 (1994). Mode I interlaminar fracture toughness of unidirectional fiber-reinforced polymer matrix composites. [Pg.85]

O Brien, T.K. and Martin, R.H. (1992). Results of ASTM round robin testing for mode I interlaminar fracture toughness of composite materials, NASA TM 104222. [Pg.90]

Fig. 8.2. Composite mode I interlaminar fracture toughness, G[, as a function of respective neat resin toughness, G] ( ) Kim et al. (1992) (O) from Russell and Street (1987) ( ) toughened thermosets and ( ) thermoplasties from Hunston et al. (1987) (A) from Bradley (1989a) ( ) from Jordan and Bradley... Fig. 8.2. Composite mode I interlaminar fracture toughness, G[, as a function of respective neat resin toughness, G] ( ) Kim et al. (1992) (O) from Russell and Street (1987) ( ) toughened thermosets and ( ) thermoplasties from Hunston et al. (1987) (A) from Bradley (1989a) ( ) from Jordan and Bradley...
Fig. 8.3. In-situ scanning electron microphotographs of mode I interlaminar fracture of Hexed T6T145 carbon liber composites containing (a) 1155 unmodifted epoxy matrix, and (b) FIS5 rubber-modified epoxy matrix. Reprinted from Bradley (1989b), with kind permission from Hlsevier Seience-NL, Sarti burger hart straat 25, 1055 KV Amsterdam, Fhc Netherlands,... Fig. 8.3. In-situ scanning electron microphotographs of mode I interlaminar fracture of Hexed T6T145 carbon liber composites containing (a) 1155 unmodifted epoxy matrix, and (b) FIS5 rubber-modified epoxy matrix. Reprinted from Bradley (1989b), with kind permission from Hlsevier Seience-NL, Sarti burger hart straat 25, 1055 KV Amsterdam, Fhc Netherlands,...
Fig. 8.9, Correlation of residual compression-after-impacl (CAI) strength with composite mode I interlaminar fracture toughness, After Hirschbuehler (1987). Fig. 8.9, Correlation of residual compression-after-impacl (CAI) strength with composite mode I interlaminar fracture toughness, After Hirschbuehler (1987).
Effect of through-the-thickness stitches on flexural strength and Mode I interlaminar fracture toughness of carbon fiber-epoxy matrix composites manufactured using unidirectional prepregs". [Pg.355]

Stitches Flexural strength (MPa) Mode I interlaminar fracture toughness (kJ/m )... [Pg.355]

ISO, Standard test method for mode I interlaminar fracture toughness, G/c, of unidirectional fibre-reinforced polymer matrix Composites. ISO 15024 2001. Blackman, B.R.K., H. Hadavinia, A.J. Kinloch, M. Paraschi and J.G, Williams, The calculation of adhesive fracture energies in mode I revisiting the tapered double cantilever beam (TDCB) test. Engineering Fracture Mechanics 2003. 70 p. 233-248. BSI, Determination of the mode I adhesive fracture energy, Gic, of structural adhesives using the double cantilever beam (DCB) and tapered double cantilever beam (TDCB) specimens. 2001. BS 7991. [Pg.304]

Fig. 5. Relationship between load and crack opening Fig. 6. Relationship between normalized crack displacement for mode I interlaminar fracture tough- length and compliance for DCB specimen in ness tests inT300/EpoxyH and Altex/EpoxyH lami- T300/EpoxyH laminates in TTK-LN -nates in 77K-LN,. Fig. 5. Relationship between load and crack opening Fig. 6. Relationship between normalized crack displacement for mode I interlaminar fracture tough- length and compliance for DCB specimen in ness tests inT300/EpoxyH and Altex/EpoxyH lami- T300/EpoxyH laminates in TTK-LN -nates in 77K-LN,.
The ratio of the mode I interlaminar fracture toughness in 77K-LNj to that in RT-air was 1.8 for ALF/epoxy laminates. This ratio was decreased to 1.2 to 1.3 for CF/epoxy laminates. Thus, the increase of the matrix toughness was directly translated into the increase of the interlaminar fracture toughness for ALF/epoxy laminates. The effect was smaller for CF/epoxy laminates. Fractographic observation indicated foe contribution of resin is larger for ALF/epoxy laminates. Dominant interfacial fracture concealed the effect of resin for CF/epoxy laminates. [Pg.431]

ISO 15024. (2001) Standard test method for mode I interlaminar fracture toughness, G/c, of unidirectional fibre-reinforced polymer matrix composites. [Pg.488]

Therefore the Mode I interlaminar fracture toughness is computed using the following modified heam expression. [Pg.564]

Shindo Y, Horiguchi H, Wang R, Kudo H. Double cantilever beam measurement and finite element analysis of cryogenic mode I interlaminar fracture toughness of... [Pg.227]

F E Sloan and R J Seymour, The effect of seawater exposure on mode I interlaminar fracture and crack growth in graphite/epoxy , J Compos Mater 1992 26(18) 2655-2673. [Pg.264]

Mode I interlaminar fracture toughness of S-2 glass 3DNCOW composites using double-cantilever tests was studied by Tamuzs et al. (2003). [Pg.71]

Sirrruk A, Penumadu D, and Weitsman YJ (2010) Fatigue behavior of carbon fiber and vinyl ester sandwich facing material due to sea environment. In Ninth international conference on sandwich structures (ICSS-9). California Institute of technology, Pasadena, 14—16 June 2010 Sloan FE, Seymour RJ (1992) The effect of seawater exposure on mode I interlaminar fracture and crack growth in graphite/epoxy. J Compos Mater 26(18) 2655-2673 Smith LV, Weitsman YJ (1996) The immersed fatigue response of polymer composites. Int J Fract 82(1) 31 2... [Pg.143]

Ye, L. and Friedrich, K. (1993) Mode I interlaminar fracture of co-mingled yam based glass/polypropylene composites. Compos. Sci. Technol., 187-198. [Pg.359]

Chai H (1986) Bond thickness effect in adhesive joints and its significance for mode I interlaminar fracture of composites. In Seventh conference on composite materials testing and design ASTM STP 893, American Society for Testing and Materials, Philadelphia... [Pg.500]

ISO (2001) Standard test method for mode I interlaminar fracture toughness, GIC, of unidirectional fibre-reinforced polymer matrix composites. ISO 15024 ISO (2009) Adhesives - Detemination of the mode I adhesive fracture energy GIC of structural adhesive joints using double cantilever beam and tapered double beam specimens. ISO Standard 25217 Kawashita LF, Moore DR et al (2005) Comparison of peel tests for metal-polymer laminates for aerospace applications. J Adhes 81 561-586... [Pg.500]

Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-reinforced Polymer Matrix Composites Standard Test Method for Apparent Shear Strength of Parallel Fiber Composites by Short-Beam Method... [Pg.208]

See other pages where Mode I interlaminar fracture is mentioned: [Pg.76]    [Pg.191]    [Pg.194]    [Pg.332]    [Pg.336]    [Pg.338]    [Pg.340]    [Pg.345]    [Pg.425]    [Pg.444]    [Pg.559]    [Pg.197]    [Pg.228]    [Pg.2736]   


SEARCH



Fracture modes

Interlaminar fracture

Mode I fracture

Mode I interlaminar fracture toughness

© 2024 chempedia.info