Microstructure studies Fourier transform infrared

Cremer, D.R. and Kaletung, G. 2003. Fourier transform infrared microspectroscopic study of the chemical microstructure of corn and oat flour-based extrudates. Carbohydr. Polym. 52, 53-65. 

Chemical characterisation of F uptake in archaeological bone has already been developed in the 19th century [1,2] and is now well established [60], However, relatively few studies use a combined multianalytical approach using trace elemental and microstructure analytical techniques (PIXE/PIGE, TEM-EDX) for evidencing modifications on different microscopic and nanoscopic levels (Fourier transform-infrared spectroscopy (FT-IR), X-ray diffraction (XRD), SEM, TEM) and enabling an objective evaluation of the F uptake mechanisms [32-34,51],... 

The apparatus used for IR microscopy is a Fourier-transform infrared (FTIR) spectrometer coupled on-line with an optical microscope. The microscope serves to observe the sample in white light at significant magnification for the purpose of determining its morphology, as well as to select the area for analysis. The spectrometer, on the other hand, enables study of the sample by transmission or reflection measurement for the purpose of determining the chemical composition. It also provides information about the microstructure and optical properties (orientation) of the sample. It is possible to apply polarised light both in the observation of the sample and in spectrometric measurements. 

Copolymers with sites for association in aqueous solutions were pre-pared by copolymerizing acrylamide with N-alkylacrylamides or with the ampholytic monomer pairs sodium 2-acrylamido 2 methylpro-panesulfonate (NaAMPS) and 2-acrylamido-2-methylpropane-dimethylammonium chloride (AMPDAC). The copolymers were characterized by elemental analysis, NMR and Fourier transform infrared spectroscopy, and lowhangle laser and quasielastic lightscattering measurements. Rheological properties were studied as a function of microstructure, molecular weight, polymer concentration, electrolyte concentration, and shear rate. On the basis of those results, a conceptual model that is based on microheterogeneous domain formation in aqueous solutions is proposed. 

Two series of cellulose samples, Avicel and Whatman CFll cellulose ball-milled powders with different crystallinity are studied below Tg temperature by using positron annihilation lifetime spectroscopy. A good correlation is found between ortho-positronium formation probability and crystallinity as measured by Fourier transform -infrared spectroscopy. Sub-nanometer hole distributions are found to be narrowed as a function of milling time. These are interpreted in terms of microstructural changes of cellulose. 

Fourier transform infrared (FTIR) spectroscopy is a powerful and reliable technique that for many years has been an important tool for investigating chemical processes and structures. In the polymer fields, FTTR data is used in order to study characterization of chemical bonds, polymer microstructure, chain conformation, polymer morphology, crystallinity and etc, consequently is useful in SPR studies. 

Qian et al. conducted a study on bamboo particles (BP) that were treated with low-concentrations of alkali solution for various times and used as reinforcements in PLA based composites [35]. Characteristics of BP by composition analysis, scaiming electron microscopy, Brunauer-Emmett Teller test, and Fourier transform infrared spectroscopy, showed that low-concentration alkali treatment had a significant influence on the microstructure, specific surface area, and chemical groups of BP. PLA/treated-BP and PLA/untreated-BP composites were both produced with 30 wt% BP content. Mechanical measurements showed that tensile strength, tensile modulus, and elongation at break of PLA/BP composites increased when the alkali treatment time reached... 

---