Microporous silica membranes steam reforming

In summary, the main goal of the present work is the development of a hydrothermally stable microporous silica membrane with prescribed transport properties. Preferably, these steam stable membranes should have very high permselectivities. Because the permselectivity of a molecular sieving silica membrane will drop to the Knudsen value of the y-alumina supporting membrane when the silica membrane deteriorates under steam reforming conditions, a selectivity of the silica layer higher than the Knudsen selectivity is sufficient. In this way the measurement of the permselectivity is a powerful tool to assess the hydrothermal stability of a supported microporous membrane. 

Somewhat surprisingly, however, only a very limited amount of literature is available on hydrothermal stability of even the most commonly applied mesoporous membrane type, namely y-alumina membranes on OC-AI2O3 supports. These mesoporous y-alumina membranes are the common supports for the microporous silica membranes to be used in membrane steam reformers. In the investigations that finally led to the present study, delamination of the y-alumina membrane from the OC-AI2O3 supports in hot steam was found to be a major compli-... 

The results obtained for microporous silica membranes in the membrane steam-reforming project, described in this thesis, provide favourable perspectives to realise a Th-permselective membrane reactor for the dehydrogenation of H2S. Realisation of such a reactor, however, imposes significant scientific and technical challenges. 

Key words microporous silica, membrane reactors, water-gas shift reaction, autothermal reforming, steam reforming. 

---