Microjets ultrasound effects

In the literature we can now find several papers which establish a widely accepted scenario of the benefits and effects of an ultrasound field in an electrochemical process [13-15]. Most of this work has been focused on low frequency and high power ultrasound fields. Its propagation in a fluid such as water is quite complex, where the acoustic streaming and especially the cavitation are the two most important phenomena. In addition, other effects derived from the cavitation such as microjetting and shock waves have been related with other benefits reported for this coupling. For example, shock waves induced in the liquid cause not only an enhanced convective movement of material but also a possible surface damage. Micro jets of liquid, with speeds of up to 100 ms-1, result from the asymmetric collapse of cavitation bubbles at the solid surface [16] and contribute to the enhancement of the mass transport of material to the solid surface of the electrode. Therefore, depassivation [17], reaction mechanism modification [18], surface activation [19], adsorption phenomena decrease [20] and the mass transport enhancement [21] are effects derived from the presence of an ultrasound field on electrode processes. We have only listed the main phenomena referring to the reader to the specific reviews [22, 23] and reference therein. 

As we have mentioned before, acoustic streaming, cavitation and other effects derived from them, microjetting and shock waves take also relevance when the ultrasound field interacts with solid walls. On the other hand, an electrochemical process is a heterogeneous electron transfer which takes place in the interphase electrode-solution, it means, in a very located zone of the electrochemical system. Therefore, a carefully and comprehensive read reveals that all these phenomena can provide opposite effects in an electrochemical process. For example, shock waves can avoid the passivation of the electrode or damage the electrode surface depending on the electrode process and/or strength of the electrode materials [29]. 

Ultrasound frequency has revealed as the most important operational variable. Low frequency (20-60 kHz) has been most used to obtain mechanical effects such mass transport enhancement, shock waves, microjetting and surface vibration, especially used in the nanostructure preparation. It has been reported [118] that... 

---