Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

3- Methyltetrahydrofuran

Depending on catalysts and conditions, products of hydrogenation can include furfuryl alcohol [98-00-0] tetrahdrofurfuryl alcohol [97-99-4] 2-meth5ifuran [534-22-5] and even 2-methyltetrahydrofuran [96-47-9]. Under strongly reducing conditions, the ring is opened. [Pg.77]

Uses. Furfural is primarily a chemical feedstock for a number of monomeric compounds and resins. One route produces furan by decarbonylation. Tetrahydrofuran is derived from furan by hydrogenation. Polytetramethylene ether glycol [25190-06-1] is manufactured from tetrahydrofuran by a ring opening polymeri2ation reaction. Another route (hydrogenation) produces furfuryl alcohol, tetrahydrofurfuryl alcohol, 2-methylfuran, and 2-methyltetrahydrofuran. A variety of proprietary synthetic resins are manufactured from furfural and/or furfuryl alcohol. Other... [Pg.78]

Hydrogenation of furfuryl alcohol can yield 2-tetrahydrofurfuryl alcohol, 2-methylfuran, 2-methyltetrahydrofuran, or straight-chain compounds by hydrogenolysis of the ring. Ethoxylation and propoxylation of furfuryl alcohol provide usefiil ether alcohols. [Pg.79]

Finally the aminoquinoline bearing a primary amine at the terminal carbon atom of the side chain is itself an effective antimalarial drug. Ring opening of 2-methyltetrahydrofuran by bromine gives the dibromide, 99. The primary halide is sufficiently less hindered so that reaction with potassium phthalimide affords exclusively the product of displacement of that halogen (100). Alkylation of the aminoquinoline with lOO affords the secondary amine, 101. Removal of the phthalimide group by means of hydrazine yields primaquine (102). ... [Pg.346]

Little work has been done on bare lithium metal that is well defined and free of surface film [15-24], Odziemkowski and Irish [15] showed that for carefully purified LiAsF6 tetrahydrofuran (THF) and 2-methyltetrahydrofuran 2Me-THF electrolytes the exchange-current density and corrosion potential on the lithium surface immediately after cutting in situ, are primarily determined by two reactions anodic dissolution of lithium, and cathodic reduc-... [Pg.422]

THF and its impurities (acetone, acrolein, 2,3-dihydrofuran. butyraldehyde, isopropyl alcohol, tetrahydrofuran, 1,3-dioxo-lane, 2-methyltetrahydrofuran, benzene, and 3-methyltetrahv-drofuran)... [Pg.67]

For the mechanism of n-butyllithium cleavage of 2-methyltetrahydrofuran, see Cohen, T. Stokes, S. Tetrahedron Lett., 1993, 34, 8023. [Pg.1365]

The results of low-temperature matrix-isolation studies with 6 [41a] are quite consistent with the photochemical formation of cyclo-Cif, via 1,2-diketene intermediates [59] and subsequent loss of six CO molecules. When 6 was irradiated at A > 338 nm in a glass of 1,2-dichloroethane at 15 K, the strong cyclobut-3-ene-1,2-dione C=0 band at 1792 cm in the FT-IR spectrum disappeared quickly and a strong new band at 2115 cm appeared, which was assigned to 1,2-diketene substructures. Irradiation at A > 280 nm led to a gradual decrease in the intensity of the ketene absorption at 2115 cm and to the appearance of a weak new band at 2138 cm which was assigned to the CO molecules extruded photo-chemically from the 1,2-diketene intermediates. Attempts to isolate cyclo-Cig preparatively by flash vacuum pyrolysis of 6 or low-temperature photolysis of 6 in 2-methyltetrahydrofuran in NMR tubes at liquid-nitrogen temperature have not been successful. [Pg.50]

Ito and Matsuda studied the y-radiolysis of 2-methyltetrahydrofuran (MTHF) solutions of diphenyl sulfone and dibenzothiophene-S,S-dioxide (DBTSD) at 77 K. They found that the radical anions of these sulfone compounds are formed and have intense absorption bands at 1030 nm and 850 nm, respectively. The blue glassy solution of y-irradiated diphenyl sulfone has absorption bands at both 1030 nm and 360 nm while the absorption spectrum of the benzenesulfonyl radical formed by UV irradiation of diphenyl sulfone solution at 77 K showed only a peak at 382 nm. Gamma-irradiated phenyl methyl sulfone solution showed an absorption band only at 385 nm. Consequently the appearance of the absorption bands in 800-1030 nm of diphenyl sulfone and DBTSD may suggest that the unpaired electron is delocalized on two phenyl rings. The same authors studied the radiolysis of MTHF solutions of disulfones (diphenyl and dihexyl disulfones). They found a blue coloring of the solution by the y-radiolysis of diphenyl disulfone and dihexyl disulfone due to absorption peaks at 695 nm and 690 nm respectively, besides smaller absorptions at 300-400 nm. Comparing these results to the previous observation, that phenyl methyl sulfone solution absorbs only at 398 nm, results in the conclusion that the absorption band at 690 nm is due to the linked two sulfone moieties. The authors found that substituents on the phenyl ring lead to shifts in the absorption maxima of the... [Pg.912]

The reactions can also be effected by phenyliodonium diacetate.377 A mechanistic prototype can be found in the conversion of pentanol to 2-methyltetrahydrofuran. The secondary radical is most likely captured by iodine or oxidized to the carbocation prior to cyclization.378... [Pg.991]

When silylenes are generated photochemically in hydrocarbon matrices in the presence of electron-pair donors, they may form Lewis acid-base complexes that act as intermediates in the silylene dimerization to disilenes.3233 In a typical example, Mes2Si(SiMe3)2 was photolyzed in 3-meth-ylpentane (3-MP) matrix containing 5% of 2-methyltetrahydrofuran. At 77 K, dimesitylsilylene (Amax 577 nm) was formed. When the matrix was... [Pg.237]

The chemical properties of BA have been studied in detail (Lapin et al., 1984). Low temperature epr spectroscopy shows clearly that the ground state of BA is the triplet (3BA). The zero field parameters (Table 3) reveal some details of this structure. When the irradiation is performed at 4.6 K in a 2-methyltetrahydrofuran glass no epr signals from radical species are apparent. The optical spectrum under these conditions shows absorptions (Table 4) which disappear when the glass is warmed. From these findings the absorption bands are assigned tentatively to 3BA. This conclusion is strongly supported by results from laser flash photolysis experiments. [Pg.331]


See other pages where 3- Methyltetrahydrofuran is mentioned: [Pg.459]    [Pg.482]    [Pg.523]    [Pg.684]    [Pg.822]    [Pg.1087]    [Pg.629]    [Pg.83]    [Pg.301]    [Pg.150]    [Pg.58]    [Pg.58]    [Pg.460]    [Pg.461]    [Pg.517]    [Pg.912]    [Pg.520]    [Pg.2339]    [Pg.201]    [Pg.168]    [Pg.430]    [Pg.131]    [Pg.131]    [Pg.414]    [Pg.638]    [Pg.1942]    [Pg.130]    [Pg.73]    [Pg.236]    [Pg.30]    [Pg.32]    [Pg.728]    [Pg.751]    [Pg.792]    [Pg.1091]    [Pg.824]    [Pg.61]   
See also in sourсe #XX -- [ Pg.201 ]

See also in sourсe #XX -- [ Pg.347 , Pg.349 ]

See also in sourсe #XX -- [ Pg.24 ]

See also in sourсe #XX -- [ Pg.44 , Pg.49 , Pg.54 , Pg.57 ]

See also in sourсe #XX -- [ Pg.592 ]

See also in sourсe #XX -- [ Pg.372 ]

See also in sourсe #XX -- [ Pg.60 ]

See also in sourсe #XX -- [ Pg.95 ]

See also in sourсe #XX -- [ Pg.248 ]

See also in sourсe #XX -- [ Pg.537 ]

See also in sourсe #XX -- [ Pg.332 ]

See also in sourсe #XX -- [ Pg.215 , Pg.217 , Pg.220 , Pg.223 , Pg.224 , Pg.225 ]

See also in sourсe #XX -- [ Pg.644 ]

See also in sourсe #XX -- [ Pg.228 ]

See also in sourсe #XX -- [ Pg.747 ]

See also in sourсe #XX -- [ Pg.1087 ]

See also in sourсe #XX -- [ Pg.117 ]

See also in sourсe #XX -- [ Pg.26 , Pg.27 , Pg.32 ]

See also in sourсe #XX -- [ Pg.31 ]

See also in sourсe #XX -- [ Pg.201 ]

See also in sourсe #XX -- [ Pg.149 ]

See also in sourсe #XX -- [ Pg.153 ]




SEARCH



2-Hydroxy-2-methyltetrahydrofuran

2-Methyltetrahydrofuran, ring opening

2-Methyltetrahydrofuran-3-one

2-Methyltetrahydrofurane

2-Methyltetrahydrofurane

2-methyltetrahydrofuran electrolyte

2-methyltetrahydrofuran solvent properties

A-Methyltetrahydrofuran

Glass 2-methyltetrahydrofuran

Methyltetrahydrofuran (2-MeTHF)

Methyltetrahydrofuran applications

Methyltetrahydrofuran electron decay

Methyltetrahydrofuran production

Methyltetrahydrofuran radiolysis

Methyltetrahydrofuran, polymerization

Methyltetrahydrofuran-acetonitrile

Methyltetrahydrofurans reaction

Methyltetrahydrofurans, oxidation

© 2024 chempedia.info