Methylsilanes

Me3SiCH2CH=CH2i TsOH, CH3CN, 70-80°, 1-2 h, 90-95% yield. This silylating reagent is stable to moisture. Allylsilanes can be used to protect alcohols, phenols, and carboxylic acids there is no reaction with thiophenol except when CF3S03H is used as a catalyst. The method is also applicable to the formation of r-butyldimethylsilyl derivatives the silyl ether of cyclohexanol was prepared in 95% yield from allyl-/-butyldi-methylsilane. Iodine, bromine, trimethylsilyl bromide, and trimethylsilyl iodide have also been used as catalysts. Nafion-H has been shown to be an effective catalyst. 

In the case of phenylchlorosilanes some modifications are made to the process. Chlorobenzene is passed through the reaction tube, which contains a mixture of powdered silicon and silver (10% Ag), the latter as catalyst. Reaction temperatures of 375-425°C are significantly higher than for the chloro-methylsilanes. An excess of chlorobenzene is used which sweeps out the high boiling chlorophenysilanes, of which the dichlorosilanes are predominant. The unused chlorobenzene is fractionated and recycled. 

The rotational barrier in methylsilane (Table 3.4, entry 5) is significantly smaller than that in ethane (1.7 versus 2.88 kcal/mol). This reflects the decreased electron-electron rqjulsions in the eclipsed conformation resulting from the longer carbon-silicon bond length (1.87 A) compared to the carbon-carbon bond length (1.54 A) in ethane. 

Fig. 18. Yield strengths in three-point bend tests of highly filled composites of polyfvinyl butyral) and silica particles treated with methylsilane and octylsilane coupling agents to varying degrees of surface coverage vs. work of adhesion measured independently using IGC. Redrawn from ref. [90].

Examples of photochemical methods of addition to acetylene derivatives are the addition of methyl disulfide to hexafluoro-2-butyne [7] (equation 8), of trifluaramethanethial to methyl propiolate [S] (equation 9), of methanethiol to trifluoromethylacetylene and hexafluoro-2-butyne [9] (equation 8), and of tri-methylsilane to tetrafluoropropyne [10. ... 

Siheium-athan, n. silicoethane (methylsilane, CHsSiHs, or disilane, SiQsSiHs). -bromid,... 

Angelini, P., Chemical Vapor Deposition of Silicon Carbide from Methylsilane and Coating of Nuclear Waste Ceramics, Diss. Abstr. Int, 46(9) 170 (Mar. 1986)... 

CHROMIUM TRIOXIDE-PYRIDINE COMPLEX, preparation in situ, 55, 84 Chrysene, 58,15, 16 fzans-Cinnamaldehyde, 57, 85 Cinnamaldehyde dimethylacetal, 57, 84 Cinnamyl alcohol, 56,105 58, 9 2-Cinnamylthio-2-thiazoline, 56, 82 Citric acid, 58,43 Citronellal, 58, 107, 112 Cleavage of methyl ethers with iodotri-methylsilane, 59, 35 Cobalt(II) acetylacetonate, 57, 13 Conjugate addition of aryl aldehydes, 59, 53 Copper (I) bromide, 58, 52, 54, 56 59,123 COPPER CATALYZED ARYLATION OF /3-DlCARBONYL COMPOUNDS, 58, 52 Copper (I) chloride, 57, 34 Copper (II) chloride, 56, 10 Copper(I) iodide, 55, 105, 123, 124 Copper(I) oxide, 59, 206 Copper(ll) oxide, 56, 10 Copper salts of carboxylic acids, 59, 127 Copper(l) thiophenoxide, 55, 123 59, 210 Copper(l) trifluoromethanesulfonate, 59, 202... 

Thus removal of water from classical rather inactive fluoride reagents such as tetrabutylammonium fluoride di- or trihydrate by silylation, e.g. in THF, is a prerequisite to the generation of such reactive benzyl, allyl, or trimethylsilyl anions. The complete or partial dehydration of tetrabutylammonium fluoride di- or trihydrate is especially simple in silylation-amination, silylation-cyanation, or analogous reactions in the presence of HMDS 2 or trimethylsilyl cyanide 18, which effect the simultaneous dehydration and activation of the employed hydrated fluoride reagent (cf, also, discussion of the dehydration of such fluoride salts in Section 13.1). For discussion and preparative applications of these and other anhydrous fluoride reagents, for example tetrabutylammonium triphenyldifluorosilicate or Zn(Bp4)2, see Section 12.4. Finally, the volatile trimethylsilyl fluoride 71 (b.p. 17 °C) will react with nucleophiles such as aqueous alkali to give trimethylsilanol 4, HMDSO 7, and alkali fluoride or with alkaline methanol to afford methoxytri-methylsilane 13 a and alkali fluoride. 

Benzaldehyde dimethyl acetal 121 reacts, for example, with the silylated allylic alcohol 645, in the presence of SnCl2-MeCOCl, via an intermediate analogous to 641, to the 3-methylenetetrahydrofuran 646 and methoxytrimethylsilane 13 a [182], whereas benzaldehyde dimethyl acetal 121 reacts with the silylated homoallylalco-hol 640 in the presence of TMSOTf 20 to afford exclusively the ds 4-vinyltetrahy-drofuran 647 and 13 a [183]. A related cyclization of an a-acetoxy urethane 648 containing an allyltrimethylsilane moiety gives the 3-vinylpyrrohdine 649 in 88% yield and trimethylsilyl acetate 142 [184, 185]. Likewise, methyl 2-formylamido-2-trimethylsilyloxypropionate reacts with allyltrimethylsilane 82 or other allyltri-methylsilanes to give methyl 2-formamido-2-aUyl-propionate and some d -unsatu-rated amino acid esters and HMDSO 7 [186] (Scheme 5.56). 

With trimethylsilyl iodide 17 the 0,N-acetal 457 gives the iminium iodide as reactive intermediate this converts the enol silyl ether 107 a in situ into the Man-nich-base 669, in 81% yield, and hexamethyldisiloxane 7 [195]. On treatment of the 0,N-acetal 473 (or the N-silylated Schiff base 489) with TMSOTf 20 (or Zny, the intermediate iminium triflate adds to the ketene acetal 663 to give mefhoxytri-methylsilane 13 a and silylated / -amino esters such as 670, which are readily transsilylated by methanol to give the free / -aminoester [70, 196] (Scheme 5.61). 

Benzaldehyde can be condensed with the N-silylated urethane 671 and aUyltri-methylsilane 82 in the presence of trityl perchlorate to give, via an intermediate 0,N-acetal, the substituted urethane 672 in high yield [197]. 0,N-Acetals such as 673 condense with the enol silyl ether of acetophenone 653 in the presence of TMSOTf 20 to give the co-hydroxyurethane 674 in 94% yield [198] (Scheme 5.62). 

The seleno derivative 1374, which can be readily prepared by reduction of di-phenyldiselenide with sodium borohydride then alkylation with chloromethyltri-methylsilane, is alkylated to 1375 to give, on oxidative hydrolysis, aldehydes 1376 in high yields, PhSe02H-H20 1377 [104], and 7 (Scheme 8.44). Alkylation of the commercially available methyl thiomethyl sulfoxide 1378 leads to mono- or dialkyl... 

As described in Section 7.4, hexamethyldisilane 857 reduces, analogously, pyridine, quinoline and isoquinoline N-oxides to the free bases [17] and converts aromatic nitro groups to azo compounds [12]. Likewise, as already discussed allyltti-methylsilane 82 and benzylttimethylsilane 83 will gradually dehydrate and activate BU4NF-2-3H20 in situ to catalyze the addition of 82 and 83 to pyridine, quinoline, and isoquinoline N-oxides [13] (cf Section 7.2). 

An interesting application of the above methodologies has been in the synthesis of methylsilane- and methylsiloxane-linked cyclotripho-sphazenes (151). Since the above methodology does not achieve the... 

---