2-Methyl-2,3-butanediol

An early attempt to hydroformylate butenediol using a cobalt carbonyl catalyst gave tetrahydro-2-furanmethanol (95), presumably by aHybc rearrangement to 3-butene-l,2-diol before hydroformylation. Later, hydroformylation of butenediol diacetate with a rhodium complex as catalyst gave the acetate of 3-formyl-3-buten-l-ol (96). Hydrogenation in such a system gave 2-methyl-1,4-butanediol (97). 

Vinyl Ethers. The principal commercial vinyl ethers are methyl vinyl ether (methoxyethene, C H O) [107-25-5], ethyl vinyl ether (ethoxyethene, C HgO) [104-92-2], and butyl vinyl ether (1-ethenyloxybutane, C H 20) [111-34-2]. (See Table 8 for physical properties.) Others such as the isopropyl, isobutyl, hydroxybutyl, decyl, hexadecyl, and octadecyl ethers, as well as the divinyl ethers of butanediol and of triethylene glycol, have been offered as development chemicals (see Ethers). 

Biacetyl is produced by the dehydrogenation of 2,3-butanediol with a copper catalyst (290,291). Prior to the availabiUty of 2,3-butanediol, biacetyl was prepared by the nitrosation of methyl ethyl ketone and the hydrolysis of the resultant oxime. Other commercial routes include passing vinylacetylene into a solution of mercuric sulfate in sulfuric acid and decomposing the insoluble product with dilute hydrochloric acid (292), by the reaction of acetal with formaldehyde (293), by the acid-cataly2ed condensation of 1-hydroxyacetone with formaldehyde (294), and by fermentation of lactic acid bacterium (295—297). Acetoin [513-86-0] (3-hydroxy-2-butanone) is also coproduced in lactic acid fermentation. 

Figure 15.11 (a) Total ion clnomatogram of a Grob test mixture obtained on an Rtx-1701 column, and (b) re-injection of the entire clnomatogram on to an Rtx-5 column. Peak identification is as follows a, 2,3-butanediol b, decane c, undecane d, 1-octanol e, nonanal f, 2,6-dimethylphenol g, 2-ethylhexanoic acid h, 2,6-dimethylaniline i, decanoic acid methyl ester ], dicyclohexylamine k, undecanoic acid, methyl ester 1, dodecanoic acid, methyl ester. Adapted from Journal of High Resolution Chromatography, 21, M. J. Tomlinson and C. L. Wilkins, Evaluation of a semi-automated multidimensional gas chromatography-infrared-mass specti ometry system for initant analysis , pp. 347-354, 1998, with permission from Wiley-VCH. 

Chemical Name 2-(4-Chlorophenyl)-3-methyl-2,3-butanediol Common Name —... 

To a solution of 2 mols of methylmagnesium iodide in 1.5 liters of ether are added with vigorous stirring 107 g (0.5 mol) of ethyl p-chloroatrolactate. The reaction mixture is stirred for about sixteen hours, and is then decomposed by the addition of about 320 ml of saturated aqueous ammonium chloride solution. After standing, the ether layer is decanted from the mixture and the aqueous phase and the precipitated salts are washed with several 500 ml portions of ether. The combined ether solution and washings are washed with successive 500 ml portions of 5% ammonium chloride solution and water, are dried over anhydrous magnesium sulfate, and are evaporated to dryness in vacuo. The crystalline residue consisting of 2-p-chlorophenyl-3-methyl-2,3-butanediol, is recrystallized from a mixture of benzene and petroleum ether. 

A chain extender could be selected from the following compounds ethylene glycol, 1,2-propanediol, 1,4-butanediol, 1,3-butanediol, neopentanediol, hexanediol, methyl-dihydroxylethyl amine (MDEA) [9], etc. These should be as dry as possible. 

Simple conjugated dienes used in polymer synthesis include 1,3-butadiene, chloroprene (Z-chloro-l -butadiene), and isoprene (2-methyl-l,3-butadiene). Isoprene has been prepared industrially by several methods, including the acid-catalyzed double dehydration of S-methyl-l/S-butanediol. 

The application of auxiliary control in the asymmetric Michael addition of chiral enolates derived from ketones is rare the only example known is the use of (27 ,37 )-2,3-butancdiol as an auxiliary. The ketal of (27 ,37 )-2,3-butanediol with 3-methyl-l,2-cyclohexanedione reacts with 3-buten-2-one using as base a catalytic amount of sodium ethoxide in ethanol195. 

MethyloU2-Butanol (2-Methyl-l,3-butanediol or a >Dioxy-/3-methylbutane). CH3.CH(OH).CH(CH2OH).CH3 mw 104.15, viscous oil, bp 200° 98—99° at 9mm. Sol in w, v sol in ale and eth. Can be prepd either by reduction of the corresponding aldehyde, 2-methylbutanol(3)-al-(l) with A1 amalgam (Ref 1), or by electrolytic reduction in 10% sulfuric acid of the corresponding ketone ale. In the latter case, methyl-2-butanone-3-ol-(l), obtained by the condensation of methylethylketone with formaldehyde, can be used. On nitration, it yields an expl dinitrate Refs 1) Beil 1,482,(250) 2)L.P.Kyria-kides, JACS 36, 535(1914)... 

Long-chain unsaturated a,oo-dicarboxylic acid methyl esters and their epox-idized derivahves were polymerized with 1,3-propanediol or 1,4-butanediol in the presence of lipase CA catalyst to produce reachve polyesters. The molecular weight of the polymer from 1,4-butanediol was higher than that from... 

Similar results with allyl alcohol were obtained by Kawahito and Ikeda (88). A rhodium tributylphosphine system gave 66% 1,4-butanediol and 22% 2-methyl-1-3-propanediol. 

BUTANAL, l-d—2-METHYL-, 51, 31 erythro-2,3-Butanediol monomesylate, by reaction of trans-2-butene oxide with methanesulfonic acid, 51, 11 3,5,1,7-[1,2,3,4]Butanetetrayl-naphthalene, decahydro-, 53, 30... 

Methyl-1,3-dioxane, available from the Aldrich Chemical Company, Inc., is used as received. Alternatively, the formal may be prepared from 1,3-butanediol and aqueous formaldehyde as previously described.2... 

It not tertiary, the product yield is lowered by transfer of the carbinol hydride ion to the aldehyde to produce a new alkoxide and an enolate ion. Thus, propylene oxide, after reductive cleavage with LDBB and trapping with isobutyraldehyde or p-anisaldehyde, provided 5-methyl-2,4-hexanediol in 40-50% yield or 1-p-anisyl-1,3-butanediol in 44% yield, respectively (in both cases about equal mixtures of diastereoisomers were obtained). The cyclohexene oxide-derived dianion, when trapped with isobutyraldehyde, gave 2-(1-hydroxy-2-methylpropyl)cyclohexanol in 71% yield as a mixture of only partially separable isomers in the ratio 15 11 39 35. 

The diastereomeric excess (de) and enantiomeric excess (ee) were determined by first converting the methyl ester to the diastereomeric acetal by acid-catalysed reaction with (2R,3 )-2,3-butanediol. The acetals were then analysed on a capillary GC HP5 column (30 m X 0.32 mm x 0.25 pm) injector 250 °C 320 °C column 130 °C isothermal. The de was calculated to be 82 % and the ee >95 %. ... 

---