Metal detectors pulse induction detector

To overcome the problem of detection in CE, many workers have used inductively coupled plasma-mass spectrometry (ICP-MS) as the method of detection. Electrochemical detection in CE includes conductivity, amperometry, and potentiometry detection. The detection limit of amperometric detectors has been reported to be up to 10 M. A special design of the conductivity ceU has been described by many workers. The pulsed-amperometric and cyclic voltametry waveforms, as well as multi step wave forms, have been used as detection systems for various pollutants. Potentiometric detection in CE was first introduced in 1991 and was further developed by various workers. 8-Hydroxyquinoline-5-sulfonic acid and lumogallion exhibit fluorescent properties and, hence, have been used for metal ion detection in CE by fluorescence detectors. Overall, fluorescence detectors have not yet received wide acceptance in CE for metal ions analysis, although their gains in sensitivity and selectivity over photometric detectors are significant. Moreover, these detectors are also commercially available. Some other devices, such as chemiluminescence, atomic emission spectrometry (AES), refractive index, radioactivity, and X-ray diffraction, have also been used as detectors in CE for metal ions analysis, but their use is stiU limited. 

Generally, there are three types of instruments used to detect ordnance cesium vapor magnetometers, radio telemetry (common metal detectors), and pulse induction units. For many years, none could reliably distinguish between metal debris and ordnance items. Even size is difficult to tell because the signal is faint on a smaller, closer object and faint on a larger, deeper object. 

---