Mesoscale model multiphase system

The mesoscale models for momentum transfer between phases differ quite substantially depending on the multiphase system under investigation, and different semi-empirical relationships have been developed for different systems. Since the nature of the disperse phase is particularly important, the available mesoscale models are generally divided into those valid for fluid-fluid and those valid for fluid-solid systems. The main difference is that in fluid-fluid systems the elements of the disperse phase are deformable particles (i.e. bubbles or droplets), whereas in fluid-solid systems the disperse phase is constituted by particles of constant shape. Typical fluid-fluid systems for which the mesoscale models reported below apply are gas-liquid, liquid-liquid, and liquid-gas systems. The mesoscale models reported for fluid-solid systems are valid both for gas-solid and for liquid-solid systems. As a general rule, the mesoscale model for Afp should be derived starting from a single-particle momentum balance ... 

The method developed in this book is also used to provide input parameters for composite models which can be used to predict the thermoelastic and transport properties of multiphase materials. The prediction of the morphologies and properties of such materials is a very active area of research at the frontiers of materials modeling. The prediction of morphology will be discussed in Chapter 19, with emphasis on the rapidly improving advanced methods to predict thermodynamic equilibrium phase diagrams (such as self-consistent mean field theory) and to predict the dynamic pathway by which the morphology evolves (such as mesoscale simulation methods). Chapter 20 will focus on both analytical (closed-form) equations and numerical simulation methods to predict the thermoelastic properties, mechanical properties under large deformation, and transport properties of multiphase polymeric systems. 

Mesoscale simulation methods will also be discussed further in Section 19.C, in the broader contexts of multiscale modeling and of predicting the morphologies of multiphase polymeric systems. Many additional examples will be given in that discussion of their utilization in addressing technologically important problems. 

By resolving the structures and dominant mechanisms, it is possible to establish a stability condition reflecting the compromise between different dominant mechanisms for multiphase reaction systems, and the stability condition supplies a mesoscale constraint in addition to mass and momentum conservation equations. The calculation of EMMS model... 

---