Master control panel

Facility will be equipped with a master control panel and alarms which permits functional verification of the exhaust blowers, filters, make-up air supply systems, fire control systems and waste treatment processes. 

Power amplification is produced by four tetrode vacuum tubes connected in pushpull-parallel as a Class AB2 amplifier. Control of the master audio oscillator signal amplitude is provided by a potentiometer on the master control panel. The output voltage of the equipment may be reduced to zero even when full voltage is applied to the plates of the power tetrodes. 

The Mixer window is subdivided into a number of master conbol panels, each of which has a fader and a small number of other controls. These control panels are used to control the mix and the routing of the audio signal through ACID. The controls correspond to similar controls found on physical mixers in the real world (see Chapter 7 on Mixers). By default, the Mixer window displays a Preview and Master control panel. 

The Master control panel controls the final volume of the project overall. FX can be added to this control panel to affect the whole project. 

Color control is achieved through the blending of the ink and is coordinated with plate registration. The image quality is determined by the amount of ink released into the ink rollers, which in turn is adjusted via the control panel, a part of the overall control console. Before being placed on the press, the plates are scanned and the data transferred to a microcassette, which serves as the master that directs the release of ink to preset values. 

The generator switchgear is recommended to have two separate lockout relays. One will receive all the electrical protection relay trip signals, and denoted as 86-1. The other will receive a master trip signal (or several trip signals) from the turbine unit control panel, and denoted as 86-2. 

The valve control panel shown in Figure 18.9 features all of the control valves for the air-actuated valves as well as the BPRs in the gas handling system. As with the second-generation iff barricade, these air-actuated process valves all fail closed, and furthermore, since the air supply to all of these valves are plumbed to a master... 

Similar to the control panel of a large technical facility, the specialists employed there are only presented with the request to solve those interruptions which the learning system can t master yet. 

Engineering controls are normally designed and built into the laser equipment to provide for safety. In most instances, these are included on the equipment (i.e., provided by the laser manufacturer). Some of these controls are protective housing, master switch control, optical viewing systan safety, beam stop or attenuation, laser activation warning system, service access panels, protective housing interlock requirements, and a remote interlock connector. 

The user friendly Graphical User Interface of the Front Panel, which reflects to the same panel on the real E2LP board, enables user to monitor and control remotely each switch, button, LED and LCD output. The GUI is enriched with the checking correcmess of the solution module, which compares the students solution with a master, created by the teacher. 

---