Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Machining of composites

S. Tandon Machining of Composites—A New Approach, M.Tech. Thesis, IIT Kanpur, India (July 1987). [Pg.171]

Teti R (2002) Machining of composite materials. CIRP Ann Manuf Technol 51(2) 611-634... [Pg.242]

An Application of Non-Linear Goal Programming in Electrodischarge Machining of Composite Material... [Pg.166]

The SiC whisker-reinforced alumina composite, a model for engineered materials, has opened new vistas for tool material development. Whereas SiC whisker-reinforced alumina is used extensively for the machining of nickel-base superaHoys, SiC whiskers react chemically with steel, causing rapid wear on the rake face. Attempts are underway to replace SiC whiskers with less reactive whiskers such as TiC or TiN. [Pg.215]

The x-ray beam axis is perpendicular to the direction of detonation in a 10 cm cube of Composition B-3 explosive (the HE) which is initiated by a large diameter plane-wave lens. (Since the machine can be flashed only once during the passage of the detonation wave, the time sequence is obtained from repeated experi-... [Pg.234]

ASTM D4304 specifies three machines for flex-cracking. The Scott Flexer is included specifically to test for ply separation of composites such as belting or tyres and is not used for rubber alone. It is a somewhat bulky apparatus in which the test pieces are reciprocated over a rotatable hub whilst held in tension. The arc of contact is about 165° but was at one time was erroneously given as 135°, resulting in at least one out of spec machine... [Pg.248]

The super-fine dispersoids with laminar structure and a low modulus could be expected to play a crucial role in improving the machinability of ceramics and their mechanical properties. Among the various nanocomposites, h-BN reinforced composites showed excellent corrosion resistance to molten metal... [Pg.246]

See other pages where Machining of composites is mentioned: [Pg.335]    [Pg.171]    [Pg.136]    [Pg.410]    [Pg.377]    [Pg.292]    [Pg.335]    [Pg.171]    [Pg.136]    [Pg.410]    [Pg.377]    [Pg.292]    [Pg.711]    [Pg.379]    [Pg.214]    [Pg.214]    [Pg.215]    [Pg.216]    [Pg.504]    [Pg.1182]    [Pg.40]    [Pg.49]    [Pg.51]    [Pg.402]    [Pg.465]    [Pg.169]    [Pg.601]    [Pg.108]    [Pg.756]    [Pg.170]    [Pg.475]    [Pg.507]    [Pg.173]    [Pg.322]    [Pg.317]    [Pg.257]    [Pg.289]    [Pg.335]    [Pg.343]    [Pg.346]    [Pg.348]    [Pg.350]    [Pg.350]    [Pg.407]    [Pg.463]    [Pg.254]    [Pg.91]   
See also in sourсe #XX -- [ Pg.391 ]



SEARCH



Composites machining

© 2024 chempedia.info