Machinery’s Handbook

Green, R. E. (ed.) 1992 Machinery s Handbook, 24th Edition. NY Industrial Press. 

Machinery s Handbook, 21st Edition, Industrial Press, 1979. 

Oberg, E., F. D. Jones, and H. L. Horton, 1984, Machinery s Handbook, 22nd ed., The Industrial Press, New York. A reference book on machine shop practice and properties of metals. 

The basic engineering formulas for structural design can be applied to plastic part design, within the limitations of the data available for the material properties, as previously discussed. This information is widely available and is not particular to plastic part design. Therefore, it will not be covered in this chapter. It is, however, found in Machinery s Handbook, 24th Edition, (Industrial Press Inc., New York) as well as in some of the other references listed at the end of this chapter. 

Green, R.E. ed.. Machinery s Handbook, 24th ed., Industrial Press, Inc., New York, 1992. 

Machinery s Handbook. For rivet assembly, semitubular rivets are best, and tubular rivets may also be used. 

Oberg, O. E. (Ed) (2000), Machinery s Handbook, 26th Edition. Industrial Press, New York. Parmley, R. O. (Ed) (1996) The Standard Handbook of Fastening and Joining, McGraw-HiU, New York. 

Pipe OD data obtained from Table 1 of Machinery s Handbook, Twentieth Edition. 

Plastics Catalogue Corp., Modern Plastics Encyclopedia and Engineer s Handbook, annual, S/B1937-. Plastics materials, engineering and methods, fabricating and finishing, machinery and equipment. Also directory of plastics manufacturers, plastics fabricators, etc. 

D. R. Smith, ed., Rubber World Magazine s 1995 Blue Book, Lippincott Peto, Akron, Ohio, 1995. An annual compilation of materials, compounding ingredients, machinery, and services for the mbber industry. Available on CD-ROM in combination with R. F. Ohm, ed., The Vanderbilt Rubber Handbook, 14th ed., 1995. 

PLASPEC Manufactining Handbook Buyer s Guide Material Machinery. Plastics Technology, annual. 

Green, D. W., J. D. Maloney, and R. H. Perry. 2008. Perry s Chemical Engineers Handbook, 8th ed. New York McGraw-Hill. Perry s has sections on both chemical and physical property data, and chemical engineering fundamentals processes operations (heat transfer, distillation, kinetics) construction materials, process machinery, waste management, and safety. Also available in electronic format. 

---