Looking up values

Discuss with your neighbor how protein adsorption can still be spontaneous (AG < 0), even though some of these processes are endothermic (AH > 0). Look up values for the solid surface energies of the two substrates in Appendix 4 (you may have to select similar materials, but this is sufficient for these purposes). How do these enthalpies compare in magnitude to the respective surface energies ... 

In order to get the real mass flow from the map, multiply by delta and divide by the square root of theta. The pressure and temperature condition immediately before the turbomachineiy is used, not the ambient measurement. For instance, at the turbine expander, the inlet temperature and pressure will be quite elevated and will change dramatically with a change in some process condition such as combustor firing rate therefore, the look-up value on the map will change. 

I used these tables of Preul for the first part of my doctoral work. The computation of integrals for a valence bond treatment of the H-F molecule on a mechanical desk calculator was greatly simplified by the fact that I could look up values for the required auxiliary functions in these tables. Toward the end of this work (1962-1963), I got access to the electronic computer Z23, which of course could perform the calculations in a much shorter time with much higher accuracy. 

For an example of using VLOOKUP and MATCH, see "Looking Up Values in Tables" in Chapter 9. 

Lookup2.xls illustrates how to look up values in a two-way table. The data table used in this example is part of the Steam Tables and is reprinted from ASME International Steam Tables for Industrial Use. The information in the table was provided by the National Institute for Standards and Technology (NIST) and is in the public domain. 

INDIRECT LOOKUP MATCH Returns a reference specified by a text value. Looks up values in an array. Looks up a value in an array and returns its relative position. 

Plan (a) We need to write the balanced equation for the combustion of CgHg. We then look up values in Appendix C or in Table 5.3 and apply Equation 5.31 to calculate the enthalpy change for the reaction, (b) We use the molar mass of Q Hg to change the... 

Knowing T and P provides the density of helium at various altitudes via the equation above. Having looked up the density of the atmosphere as a function of altitude, we must simply find the altitude at which this calculation equals the looked up value to estimate the maximum height that can be achieved by the balloon. We must recognize, however, that the mass of the instruments must be considered if we wish an accurate answer to this type of problem. 

Any time we are asked to calculate the standard entropy change for a reaction, our first thought should be to look up values for standard molar entropy and use them in Equation 10.3. The two main things we need to be careful about are (1) to watch the state of the substances (in this case all are gases) and (2) to make sure we don t forget to include the stoichiometric coefficients in our calculations. Unlike heats of formation, the standard molar entropy of an element in its standard state is not zero, so we need to be sure to include everything appearing in the equation. 

When we work with precipitation reactions like those in the previous example, we need to look up values for the equilibrium constants. But the values we find in a reference book typically refer to the opposite process—solubility. So we will need to know how an equilibrium constant changes if we modify the chemical equation to which it refers. 

Vectors and Matrices manipulate arrays and perform various linear algebra operations, such as finding eigenvalues and eigenvectors and looking up values in arrays. 

There are, of course, other exceptions to the ARIO prioritization scheme, but the exception shown above is the most common. In the vast majority of cases, it would be a safe bet to apply the four factors in the order ARIO to provide a qualitative assessment of acidity. However, to be certain, it is always best to look up values and verify your prediction. 

Emissivity (symbol, s) - The ratio of a target surface s radiance to that of a blackbody at the same temperature, viewed from the same angle and over the same spectral interval a generic look-up value for a material. Values range from zero to 1.0. 

In elementary thermodynamics courses we generally solve problems for devices and systems, processing pure species, looking up values of v, /z, and 5 in suitable tables. In this book we are mostly concerned with mixtures, and how we compute the equivalent of those tables of thermodynamic properties for mixtures. 

We can look up values for specific enthalpy from the steam tables. For state 2, we use saturated steam at 1 bar (= 100 kPa) ... 

State 1 is completely constrained. Looking up values for internal energy in the steam tables for saturated water pressure (Appendix B.2) gives ... 

Looking up values for the heat capacity parameters in Appendix A.3, we get ... 

---