Liming materials moisture

Silica and Alumina. The manufacture of Pordand cement is predicated on the reaction of lime with siUca and alumina to form tricalcium sihcate [12168-85-3] and aluminate. However, under certain ambient conditions of compaction with sustained optimum moisture content, lime reacts very slowly to form complex mono- and dicalcium siUcates, ie, cementitious compounds (9,10). If such a moist, compact mixture of lime and siUca is subjected to steam and pressure in an autoclave, the lime—silica reaction is greatiy accelerated, and when sand and aggregate is added, materials of concrete-like hardness are produced. Limestone does not react with siUca and alumina under any circumstances, unless it is first calcined to lime, as in the case of hydrauhc lime or cement manufacture. 

The purity of oxygen from chlorate candles before and after gas filtration is indicated in Table 2. A particulate filter is always used. Filter chemicals are HopcaUte, which oxidizes CO to CO2 molecular sieves (qv), which remove chlorine compounds and basic materials, eg, soda lime, which removes CO2 and chlorine compounds. Other than H2O and N2, impurity levels of <1 ppm can be attained. Moisture can be reduced by using a desiccant (see Desiccants). Gas purity is a function of candle packaging as well as composition. A hotter burning unit, eg, one in which steel wool is the binder, generates more impurities. 

Chemical Reactivity - Reactivity with Water. Reacts violently with water, liberating hydrogen chloride gas and heat Reactivity with Common Materials None if dry. If wet it attacks metals because of hydrochloric acid formed flammable hydrogen is formed Stability During Transport Stable if kept dry and protected from atmospheric moisture Neutralizing Agents for Acids and Caustics Hydrochloric acid formed by reaction with water can be flushed away with water. Rinse with sodium bicarbonate or lime solution Polymerization Not pertinent Inhibitor of Polymerization Not pertinent. 

Aeration of ferric sulfate should be held to a minimum because of the hygroscopic nature of the material, particularly in damp atmospheres. Mixing of ferric sulfate and quicklime in conveying and dust vent systems should be avoided as caking and excessive heating can result. The presence of ferric sulfate and lime in combination has been known to destroy cloth bags in pneumatic unloading devices. Because ferric sulfate in the presence of moisture will stain, precautions similar to those discussed for ferric chloride should be observed. 

---