KTH, Stockholm

Wiberg, U Material Characterization and Defect Detection in Concrete by Quantitative Ultrasonics. Doctoral Thesis, KTH Stockholm. TRITA-BKN. Bulletin 7, 1993... 

Mundt, E. 1996. The performance of displacement ventilation systems Experimental and theoretical studies. Ph.D. thesis. Bulletin No. 48, Building Services Engineering, KTH, Stockholm. 

Mierzwinski, S. 1981. Air motion and temperature distribution above a human body as a result of natural convection. A4-serien no. 45, Inst, for EIppv.- o Vent, teknik, KTH, Stockholm. 

Hellenius J (1997) MSc Thesis. Dept Polym Techn, KTH, Stockholm, Sweden Voit BI, Turner SR (1994) Angew Makromol Chem 223 13 Wooley KL, Hawker CJ, Pochan JM, Frechet JMJ (1993) Macromolecules 26 1514 Stutz H (1995) J Pol Sci Part B Polym Phys 33 333... 

Fig. 4 Electron micrograph of porous Si sacrificial substrates for ferroelectric nanotubes, from KTH (Stockholm) x9000...

Stangenberg F, Agren S, Karlsson S (2002) Refined routine analyses for quality assessment of recycled plastics in standardisation. KTH, Stockholm, Sweden... 

Albertsson A-C, Karlsson S (1997) Comparative LCA on three different schemes for the treatment of MSW. KTH Stockholm, Sweden... 

Niklaus F. Adhesive wafer bonding for microelectronic and microelectromechanical systems. Ph.D. Thesis, Royal Institute of Technology (KTH), Stockholm, Sweden. 

H. C. Hillborg, Loss and Recovery of Hydrophobicity of Polydimethylsiloxane after Exposure to Electrical Discharges PhD Thesis, KTH Stockholm, 2001. 

Mocchiutti, E. (2003). Atmospheric and Interstellar Cosmic Rays Measured with the CAPRICE98 Experiment (Thesis, KTH, Stockholm)... 

Nerad, I., Kosa, L., Miksikova, E., Sausova, S. AdamkoviCovi, K., (2000) Proc. 6th Internal Conf. Molten Slags, Fluxes and Salts, Stockhohn-Helsinki, June 12-16, Poster Session 3. KTH Stockholm 2000, CD ROM. 

Within this chapter, measurements at a radiant tube with recuperative and regenerative burner technologies will be shown as an example of how measurements should be carried out. The measurements have been accomplished at the lab-scale furnace of KTH, Stockholm [6-8], which has been shown (Figure 24.7). A W-shape radiant tube, shown in Figure 24.9, was used in the experiments. The outer diameter of the tube was... 

S. Rojas, S. Eriksson, and M. Boutonnet (KTH, Stockholm, Sweden) focus on the use of microemulsion techniques for catalyst synthesis. They discuss this as an alternative to traditional methods such as impregnation, ion exchange, and use of organometallic complexes. One specific advantage of the microemulsion method is that it results in a typically narrow particle size distribution. This is true because the metal particle is formed without being influenced by the support. They describe the specific processes used to prepare catalysts with this technique. 

The aperture may decrease 30% if the temperature increases from about 15 C to around 60°C (personal communication with Lanru Jing, KTH, Stockholm). While the diffusivity increases about 4 times. Table 1 lists the parameters at T = 15°C and T = 60 C. The parameter values at T = 60°C are obtained in the following way ... 

E. Magnus Johansson, Royal Institute of Technology (KTH), Stockholm, Sweden R Govind Menon, Royal Institute of Technology (KTH), Stockholm, Sweden Dennis Papadias, Royal Institute of Technology (KTH), Stockholm, Sweden Daniel E. Resasco, University of Oklahoma, Norman, OK, USA... 

O. Mahot and D. Momcilovic, unpublished results (Master Thesis, KTH Stockholm, 2009). 

Henriksson, M., 2008. Cellulose Nanofibril Networks and Composites—Preparation, Structure and Properties. KTH, Stockholm. 

---