Ketones preparation from ketimines

Other modifications of the polyamines include limited addition of alkylene oxide to yield the corresponding hydroxyalkyl derivatives (225) and cyanoethylation of DETA or TETA, usuaHy by reaction with acrylonitrile [107-13-1/, to give derivatives providing longer pot Hfe and better wetting of glass (226). Also included are ketimines, made by the reaction of EDA with acetone for example. These derivatives can also be hydrogenated, as in the case of the equimolar adducts of DETA and methyl isobutyl ketone [108-10-1] or methyl isoamyl ketone [110-12-3] (221 or used as is to provide moisture cure performance. Mannich bases prepared from a phenol, formaldehyde and a polyamine are also used, such as the hardener prepared from cresol, DETA, and formaldehyde (228). Other modifications of polyamines for use as epoxy hardeners include reaction with aldehydes (229), epoxidized fatty nitriles (230), aromatic monoisocyanates (231), or propylene sulfide [1072-43-1] (232). 

Hedrick et al. reported imide aryl ether ketone segmented block copolymers.228 The block copolymers were prepared via a two-step process. Both a bisphenol-A-based amorphous block and a semicrystalline block were prepared from a soluble and amorphous ketimine precursor. The blocks of poly(arylene ether ether ketone) oligomers with Mn range of 6000-12,000 g/mol were coreacted with 4,4,-oxydianiline (ODA) and pyromellitic dianhydride (PMDA) diethyl ester diacyl chloride in NMP in the presence of A - me thy 1 morphi 1 i nc. Clear films with high moduli by solution casting and followed by curing were obtained. Multiphase morphologies were observed in both cases. 

As shown in Scheme 1.95, the chiral titanocene catalyst 34 (see Scheme 1.10) prepared from 33, n-C4HgLi, andC6H5SiH3 shows a moderate-to-good enantioselectivity in the hydrogenation of /V-benzyl i mines of aryl methyl ketones, whereas the catalytic activity is rather low even at 137 atm [346]. The ketimine with R1 = 4-CH3OC6H4 is hydrogenated with (/ )-34 to give the R amine with 86% ee. The E Z of the imine substrate affects the enantioselection. The optical... 

The nucleophilic activation of hydrosilanes as HSi(OR)3 offers an opportunity to transfer one hydride on the carbon of ketones or imines [22]. The enantioselective organocatalytic hydrosilylation of ketones was first reported in 1999 by Matsu-mura et al. [23], the catalyst employed being a proline derivative 19 (Scheme 11.7). Amide 20 was also able to catalyze the hydrosilylation of ketimines, as indicated in Scheme 11.7 [24]. Improved results were recently reported by Kocovsky and Maikov [25], who prepared from valine some acyclic analogues of prolina-... 

Asymmetric Synthesis of a-Amino Acids. Chiral ketimines prepared from the title ketone and glycinates can be deprotonated and treated with electrophiles, such as alkyl halides (eq 1), or Michael acceptors, to give a-subsdtuted a-amino acids with moderate to excellent levels of diastereoselectivity. 

The intermediate aldimine or ketimine is prepared from the amine and the aldehyde or ketone in an organic solvent, and is usually hydrogenated without isolation. However, in some cases, the intermediate... 

Asymmetric reduction of ketimines to sec-aminesf Of the various hydride reagents found to achieve high enantioselective reduction of ketones, the oxazaborolidine 1 of Itsuno, prepared from BH3 and (S)-(—)-2-amino-3-methyl-I,l-diphenylbutane-l-ol, derived from (S)-valine, (12,31), is the most effective in terms of asymmetric induction. Like Corey s oxazaborolidines derived from (S)-proline, 1 can also be used in catalytic amounts. The highest enantioselectivities obtain in reduction of N-phenylimines of aromatic ketones (as high as 88% ee). The enantioselectivities are lower in the case of N-t-butylimines of aryl ketones (80% ee). Reduction of N-phenylimines of prochiral dialkyl ketones with 1 results in 10-25% ees. 

The condensation of ketimines, prepared from 2-hydroxyacetophenones and primary amines, with R COaEt in the presence of LiH yields aminovinyl ketones 139 with y-arrangement of the NHR and R groups, which exist only in the open form. In an ethanol solution of HCl, these compounds cyclise to 2-(polyfluoroalkyl)-47f-chromene-4-iminium salts 140, which can be neutralised with ammonia to form 2-(polyfluoroalkyl)-4 (-chromene-4-imines 141. On treatment with aqueous acetic acid, compounds 139 and 141 are hydrolysed to chromanones 129, which can be easily converted into chromones 130 [63] (Scheme 43). 

Also due to the high barrier of inversion, optically active oxaziridines are stable and were prepared repeatedly. To avoid additional centres of asymmetry in the molecule, symmetrical ketones were used as starting materials and converted to oxaziridines by optically active peroxyacids via their ketimines (69CC1086, 69JCS(C)2648). In optically active oxaziridines, made from benzophenone, cyclohexanone and adamantanone, the order of magnitude of the inversion barriers was determined by racemization experiments and was found to be identical with former results of NMR study. Inversion barriers of 128-132 kJ moF were found in the A-isopropyl compounds of the ketones mentioned inversion barriers of the A-t-butyl compounds lie markedly lower (104-110 kJ moF ). Thus, the A-t-butyloxaziridine derived from adamantanone loses half of its chirality within 2.3 days at 20 C (73JCS(P2)1575). 

Ketimines, enamines from, in ketones alkylation, 54, 48 Ketone, aralkyl, selective a-bromination of, 53, 111 Ketone, a,a -dibromodineopen-tyl-, preparation of, 54,... 

Furthermore, Rueping and coworkers applied their reaction conditions to the cyanation of ketimines [54]. The use of A-benzylated imines derived from aryl-methyl ketones generally gave comparable yields, but lower enantioselectivities. However, this method furnished Strecker products bearing a quaternary stereogenic center, which are valuable intermediates for the preparation of optically active a,a-disubstituted a-amino acids. 

However, the syn and anti isomers of imines are easily thermally equilibrated. They cannot be prepared as single stereoisomers directly from ketones and amines so this method cannot be used to control regiochemistry of deprotonation. By allowing lithiated ketimines to come to room temperature, the thermodynamic composition is established. The most stable structures are those shown below, which in each case represent the less substituted isomer. 

The 1,3-proton shift reaction has also been applied to the synthesis of a-(perfluoroalkyl)-a-amino acids, specifically 3.3,3-trifluoroalanine.2 -26 Attempts to prepare the A-benzylimine of ethyl 3,3.3-trifluoro-2-oxopropanoate by direct condensation with benzylamine were very difficult due to the exceptionally high stability of the intermediate a-amino alcohol, which fails to dehydrate. By contrast, 1-phenylethanamine reacted with ethyl 3,3,3-trifluoro-2-oxo-propanoate to form ketimine 33 in 83 % yield.26 The 1,3-proton shift reaction of 33 is much faster than those of ketimines derived from perfluoroalkyl ketones or perfluoroaldehydes (see Table 5). Complete conversion in triethylamine required 6 hours at room temperature and afforded the isomeric Shiff base 34 in 92 % yield. Mild hydrolysis of Shifif base 34 gives a-amino ester 35, which in turn hydrolyzes to 3,3,3-trjfluoroalanine hydrochloride (36). 

Ketimines, R2C=NH, also cannot be prepared, as a general rule, from the ketone and ammonia one of the few exceptions is 9-fluorenimine which is obtained in 66% yield when ammonia is led for several hours into fluorenone at 165°.871 It has recently been shown that ketones are converted directly into their imines by phosphinimines ... 

The preparation of aryl ketones can be achieved starting from benzoic acids and nitriles (as the reaction medium) under Pd catalysis via the ketimine intermediates (Scheme 22.11) [20a]. A similar protocol has been developed for the synthesis of aryl amidines replacing the nitrile with a cyan-amide [20b]. 

Preparing a- and 3-ketimines is often not easy, and two new routes for their synthesis now add to the available methodology for the synthesis of these sometimes useful compounds. a-Ketimines were the unexpected products of the reaction between a,a-dibromo-ketones and primary amines, and P-ketimines result in good yield from the selective C-acylation of enaminosilanes (nitrogen analogues of silyl enol ethers) with simple acid chlorides in the presence of potassium fluoride (Scheme 48). ... 

---