Isomer addition reactions

Separation and Purification of Isomers. 1-Butene and isobutylene caimot be economically separated into pure components by conventional distHlation because they are close boiling isomers (see Table 1 and Eig. 1). 2-Butene can be separated from the other two isomers by simple distHlation. There are four types of separation methods avaHable (/) selective removal of isobutylene by polymeriza tion and separation of 1-butene (2) use of addition reactions with alcohol, acids, or water to selectively produce pure isobutylene and 1-butene (3) selective extraction of isobutylene with a Hquid solvent, usuaHy an acid and (4) physical separation of isobutylene from 1-butene by absorbents. The first two methods take advantage of the reactivity of isobutylene. Eor example, isobutylene reacts about 1000 times faster than 1-butene. Some 1-butene also reacts and gets separated with isobutylene, but recovery of high purity is possible. The choice of a particular method depends on the product slate requirements of the manufacturer. In any case, 2-butene is first separated from the other two isomers by simple distHlation. 

The trans isomer is more reactive than the cis isomer ia 1,2-addition reactions (5). The cis and trans isomers also undergo ben2yne, C H, cycloaddition (6). The isomers dimerize to tetrachlorobutene ia the presence of organic peroxides. Photolysis of each isomer produces a different excited state (7,8). Oxidation of 1,2-dichloroethylene ia the presence of a free-radical iaitiator or concentrated sulfuric acid produces the corresponding epoxide [60336-63-2] which then rearranges to form chloroacetyl chloride [79-04-9] (9). 

Alkynes react with mercuric acetate in acetic acid to give addition products. In the case of 3-hexyne, the product has -stereochemistry, but the Z-isomer is isolated from diphenylacetylene. The kinetics of the addition reaction are first-order in both alkyne and... 

The reaction course taken by photoexcited cycloalkenes in hydroxylic solvents depends on ring size. 1-Methylcyclohexene, 1-methylcycloheptene, and 1-methylcyclooc-tene all add methanol, but neither 1-methylcyclopentene nor norbomene does so. The key intermediate in the addition reactions is believed to be the highly reactive -isomer of the cycloalkene. 

The chemical structure of SBR is given in Fig. 4. Because butadiene has two carbon-carbon double bonds, 1,2 and 1,4 addition reactions can be produced. The 1,2 addition provides a pendant vinyl group on the copolymer chain, leading to an increase in Tg. The 1,4 addition may occur in cis or trans. In free radical emulsion polymerization, the cis to trans ratio can be varied by changing the temperature (at low temperature, the trans form is favoured), and about 20% of the vinyl pendant group remains in both isomers. In solution polymerization the pendant vinyl group can be varied from 10 to 90% by choosing the adequate solvent and catalyst system. 

Both terminal and nonterminal acetylenes have been used. Activating groups oL to the acetylenic bond have included sulfone (131-135), sulfoxide (134), ester (28,133-139), and ketone (134,140). Whether adduct 183 Is designated as cis or trans depends on the investigators and the particular compound. If the addition reaction is carried out in aprotic solvents, the major isomer is 183 formed by cis addition (135,138,139). For example, the addition of aziridine to dimethyl acetylenedicarboxylate (182, X, Y = CO2CH3) in dimethyl sulfoxide (135) gave 75 % of a mixture containing 95 % of the Chester 185. Collapse of the intermediate zwitterion intermediate 186... 

Arynes are intermediates in certain reactions of aromatic compounds, especially in some nucleophilic substitution reactions. They are generated by abstraction of atoms or atomic groups from adjacent positions in the nucleus and react as strong electrophiles and as dienophiles in fast addition reactions. An example of a reaction occurring via an aryne is the amination of o-chlorotoluene (1) with potassium amide in liquid ammonia. According to the mechanism given, the intermediate 3-methylbenzyne (2) is first formed and subsequent addition of ammonia to the triple bond yields o-amino-toluene (3) and m-aminotoluene (4). It was found that partial rearrangement of the ortho to the meta isomer actually occurs. 

The industrial reactions involving cis- and trans-2-butene are the same and produce the same products. There are also addition reactions where both 1-butene and 2-butene give the same product. For this reason, it is economically feasible to isomerize 1-butene to 2-butene (cis and trans) and then separate the mixture. The isomerization reaction yields two streams, one of 2-butene and the other of isobutene, which are separated by fractional distillation, each with a purity of 80-90%. Table 2-3 shows the boiling points of the different butene isomers. 

Conjugated dienes also undergo electrophilic addition reactions readily, but mixtures of products are invariably obtained. Addition of HBr to 1,3-butadiene, for instance, yields a mixture of two products (not counting cis-trans isomers). 3-Bromo-l-butene is the typical Markovnikov product of 1,2-addition to a double bond, but l-bromo-2-butene appears unusual. The double bond in this product has moved to a position between carbons 2 and 3, and HBr has added to carbons 1 and 4, a result described as 1,4-addition. 

Since both oxepin and its valence isomer benzene oxide contain a x-tb-diene structure they are prone to Diels-Alder addition reactions. The dienophiles 4-phenyl- and 4-methyl-4//-l,2,4-triazole-3,5-dione react with substituted oxepins at room temperature to give the 1 1 adducts 7 formed by addition to the diene structure of the respective benzene oxide.149 190,222... 

Besides simple alkyl-substituted sulfoxides, (a-chloroalkyl)sulfoxides have been used as reagents for diastereoselective addition reactions. Thus, a synthesis of enantiomerically pure 2-hydroxy carboxylates is based on the addition of (-)-l-[(l-chlorobutyl)sulfinyl]-4-methyl-benzene (10) to aldehydes433. The sulfoxide, optically pure with respect to the sulfoxide chirality but a mixture of diastereomers with respect to the a-sulfinyl carbon, can be readily deprotonated at — 55 °C. Subsequent addition to aldehydes afforded a mixture of the diastereomers 11A and 11B. Although the diastereoselectivity of the addition reaction is very low, the diastereomers are easily separated by flash chromatography. Thermal elimination of the sulfinyl group in refluxing xylene cleanly afforded the vinyl chlorides 12 A/12B in high chemical yield as a mixture of E- and Z-isomers. After ozonolysis in ethanol, followed by reductive workup, enantiomerically pure ethyl a-hydroxycarboxylates were obtained. 

Scheme 5-14 may be called a two-dimensional system of reactions, in contrast to Scheme 5-1 which consists of a one-dimensional sequence of two acid-base equilibria. In Scheme 5-14 the (Z/E) configurational isomerism is added to the acid-base reactions as a second dimension . The real situation, however, is yet more complex, as the TV-nitrosoamines may be involved as constitutional isomers of the diazohydroxide. In order not to make Scheme 5-14 too complex the nitrosoamines are not included, but are shown instead in Scheme 5-15. The latter also includes the addition reactions of the (Z)- and ( )-diazoates (5.4 and 5.5) to the diazonium ion to form the (Z,Z)-, (Z,E)- and (2 2i)-diazoanhydrides (5.6, 5.7 and 5.8) as well as proto-de-nitrosation reactions (steps 10, 11 and 12). This pathway corresponds to the reverse reaction of diazotization, as amine and nitrosating reagent (nitrosyl ion) are formed in this reaction sequence.

The rate of the addition reaction is determined by a phase boundary process, the contracting area expression [eqn. (7), n = 2] is obeyed and E = 37 kJ mole-1. The value of E for decomposition of the frarcs-chloro isomer (right-hand side of above equation) is 51 kJ mole-1, which is less than that (130 kJ mole-1) for HC1 elimination from the cis-chloro isomer. 

The first five telomers (n = 1 - 5) were isolated and identificated. The authors showed that telomers T2 and T3 are preferentially formed in one stereoisomeric form (with minor amounts of other possible isomers), i.e. the radical addition reaction makes it possible to perform asymmetric control at the steps of chain transfer and chain growth. The partial chain transfer constants Cn are given in this work, which are within the range from 0.3 to 0.5 for radicals C2-C5. We consider... 

The first element of stereocontrol in aldol addition reactions of ketone enolates is the enolate structure. Most enolates can exist as two stereoisomers. In Section 1.1.2, we discussed the factors that influence enolate composition. The enolate formed from 2,2-dimethyl-3-pentanone under kinetically controlled conditions is the Z-isomer.5 When it reacts with benzaldehyde only the syn aldol is formed.4 The product stereochemistry is correctly predicted if the TS has a conformation with the phenyl substituent in an equatorial position. 

Modest diastereoselectivity was observed for the Michael addition reaction of rac-14 to 13 and these diasteromers 28-a/28-b could be separated and individually identified. The minor isomer 28-b was found to readily undergo conversion to benzoxathiin 30 when treated with BF3 etherate, presumably through the transient intermediate 29-b. The major isomer 28-a was converted by BF3 etherate to intermediate 29-a. Conversion to 30 required the use of the stronger Lewis acid TMSOTf, presumably due to the cis-stereochemistry between the methoxy and the neighboring hydrogen, making it more difficult to eliminate/aromatize. 

In an effort to further support the proposed mechanisms for the Y+propene reaction, we have examined the reactions of Y with four isomeric butenes, which are essentially propene molecules with one additional methyl group (Fig. 31). Based on estimated potential energy barrier heights22 and thermodynamics (Fig. 32))22-31-34,i56,i57 q js eXpected that analogous product channels to those observed for propene should be seen for the butenes. Therefore, a comparison of reactions of butene isomers to reactions with propene should allow us to further test the validity of the proposed mechanisms. Here we briefly summarize our most notable conclusions from this work. 

The addition of alkyl nitronate anions to imines in the presence of a Lewis acid proceeds in high yield with up to 10 1 diastereoselection favoring the anti isomer. This reaction is used for the stereoselective synthesis of 1,2-diamines (Eq. 4.121).167 Scandium triflate catalyzes the addition of 1-trimethylsilyl nitropropanoate to imines with a similar selectivity.35... 

The addition of 2,3-dimethyl-1,3-butadiene to 17 gives only one structural isomer, 21. The pseudo-first order half-life of this Diels-Alder addition reaction is 47.5 minutes at 22.2°C in neat diene solution. The Ea of this reaction is estimated to be 9.2 kcal/mol. This reaction rate is 50 times faster than the rate of addition of this diene to methyl methacrylate (33). 

---