Iridium substitution reactions

Oxidative addition of XY substrates to [IrL2(/x-pz)]2 [La = (CO)2, cod] and [Ir(CD)(PPh3)(/i,-pz)]2 occurs via a two-center, two-electron route toward the iridium-iridium bond-containing species 131 (960M3785 980M2743). Complex 132, which is prepared by the ligand-substitution reaction from [Ir(CO)2 (/x-pz)]2, adds methyl iodide to give 133. 

As already mentioned, complexes of chromium(iii), cobalt(iii), rhodium(iii) and iridium(iii) are particularly inert, with substitution reactions often taking many hours or days under relatively forcing conditions. The majority of kinetic studies on the reactions of transition-metal complexes have been performed on complexes of these metal ions. This is for two reasons. Firstly, the rates of reactions are comparable to those in organic chemistry, and the techniques which have been developed for the investigation of such reactions are readily available and appropriate. The time scales of minutes to days are compatible with relatively slow spectroscopic techniques. The second reason is associated with the kinetic inertness of the products. If the products are non-labile, valuable stereochemical information about the course of the substitution reaction may be obtained. Much is known about the stereochemistry of ligand substitution reactions of cobalt(iii) complexes, from which certain inferences about the nature of the intermediates or transition states involved may be drawn. This is also the case for substitution reactions of square-planar complexes of platinum(ii), where study has led to the development of rules to predict the stereochemical course of reactions at this centre. 

It will not have escaped the reader s attention that the kinetically inert complexes are those of (chromium(iii)) or low-spin d (cobalt(iii), rhodium(iii) or iridium(iii)). Attempts to rationalize this have been made in terms of ligand-field effects, as we now discuss. Note, however, that remarkably little is known about the nature of the transition state for most substitution reactions. Fortunately, the outcome of the approach we summarize is unchanged whether the mechanism is associative or dissociative. 

The most fundamental reaction is the alkylation of benzene with ethene.38,38a-38c Arylation of inactivated alkenes with inactivated arenes proceeds with the aid of a binuclear Ir(m) catalyst, [Ir(/x-acac-0,0,C3)(acac-0,0)(acac-C3)]2, to afford anti-Markovnikov hydroarylation products (Equation (33)). The iridium-catalyzed reaction of benzene with ethene at 180 °G for 3 h gives ethylbenzene (TN = 455, TOF = 0.0421 s 1). The reaction of benzene with propene leads to the formation of /z-propylbenzene and isopropylbenzene in 61% and 39% selectivities (TN = 13, TOF = 0.0110s-1). The catalytic reaction of the dinuclear Ir complex is shown to proceed via the formation of a mononuclear bis-acac-0,0 phenyl-Ir(m) species.388 The interesting aspect is the lack of /3-hydride elimination from the aryliridium intermediates giving the olefinic products. The reaction of substituted arenes with olefins provides a mixture of regioisomers. For example, the reaction of toluene with ethene affords m- and />-isomers in 63% and 37% selectivity, respectively. 

Limited reports on substitution reactions of iridium(III) sulfoxide complexes are available, and some amine sulfoxide complexes have been synthesized (368). 

Y. Harel, A. W. Adamson. Photocalorimetry. 4. Enthalpies of Substitution Reactions of Rhodium(III) and Iridium(lll) Pentaammine Halides and of Ruthenium(II) Hexaammine. J. Phys. Chem. 1986, 90, 6690-6693. 

Diastereoselectivity of Iridium-Catalyzed Allylic Substitution Reactions. ..202... 

Iridium-catalyzed allylic substitution was first investigated after many years of development of allylic substitution reactions catalyzed by a variety of complexes of other metals, particularly those containing palladium. While iridium-catalyzed... 

The first iridium catalysts for allylic substitution were published in 1997. Takeuchi showed that the combination of [fr(COD)Cl]2 and triphenylphosphite catalyzes the addition of malonate nucleophiles to the substituted terminus of t -allyliridium intermediates that are generated from allylic acetates. This selectivity for attack at the more substituted terminus gives rise to the branched allylic alkylation products (Fig. 4), rather than the linear products that had been formed by palladium-catalyzed allylic substitution reactions at that time [7]. The initial scope of iridium-catalyzed allylic substitution was also restricted to stabilized enolate nucleophiles, but it was quickly expanded to a wide range of other nucleophiles. 

Most allylic substitution reactions catalyzed by other metals are selective for the formation of branched products. Although this had been demonstrated for a large portion of the d-block before Takeuchi s work with iridium, most of the progress in this area was restricted to stabilized enolate nucleophiles. 

One notable deviation from this trend of increased branched selectivity with increased 7i-accepting character has been reported. Nomura and coworkers reported allylic substitution reactions catalyzed by [lr(COD)Cl]2 and triphenylpho-sphine to form polymers linked by branched l,l -(l,4-phenylene)diprop-2-enyl units [49]. Despite this exception, most iridium-catalyzed allylic substitution... 

As previously discussed, activation of the iridium-phosphoramidite catalyst before addition of the reagents allows less basic nitrogen nucleophiles to be used in iridium-catalyzed allylic substitution reactions [70, 88]. Arylamines, which do not react with allylic carbonates in the presence of the combination of LI and [Ir(COD)Cl]2 as catalyst, form allylic amination products in excellent yields and selectivities when catalyzed by complex la generated in sim (Scheme 15). The scope of the reactions of aromatic amines is broad. Electron-rich and electron-neutral aromatic amines react with allylic carbonates to form allylic amines in high yields and excellent regio- and enantioselectivities as do hindered orlAo-substituted aromatic amines. Electron-poor aromatic amines require higher catalyst loadings, and the products from reactions of these substrates are formed with lower yields and selectivities. 

Several types of intramolecular allylic substitution reactions of carbon, nitrogen, and oxygen nucleophiles catalyzed by metalacyclic iridium phosphoramidite complexes have been reported. Intramolecular allylic substitution is much faster than the competing intermolecular process when conducted in the presence of iridium catalysts. Thus, conditions involving high dilution are not required. Intramolecular... 

Isolation and Study of Intermediates in Allylic Substitution Reactions Catalyzed by Metalacyclic Iridium-Phosphoramidite Complexes... 

Markovic and Hartwig isolated and characterized the first intermediate in iridium-catalyzed allylic substitution [100]. They isolated the metalacyclic iridium-phosphor-amidite fragment containing COD and the olefinic portion ofN- l -phenylallyl)aniline, the product of the allylic substitution reaction between cinnamyl carbonate and aniline (5 in Scheme 22). This complex containing the product of allylic substitution was first detected by NMR spectroscopy during catalytic reactions. It was then isolated, prepared independently, and shown to be chemically and kinetically competent to be an intermediate in allylic substitutions. 

In contrast, reactions catalyzed by la were typically conducted with added [Ir (C0D)C1]2 to trap the K -phosphoramidite ligand after dissociation, and thereby, to leave the unsaturated active catalyst. Under these conductions, as much as half of the iridium in the system is present in an inactive acyclic species. In contrast, when ethylene adduct lb is used as the catalyst, all of the iridium belongs to the active metalacyclic species. Hartwig and coworkers have recently taken advantage of the increased availability of the active catalyst generated from lb to develop new allylic substitution reactions. These new processes include the reactions of carbamates, nitrogen heterocycles, and ammonia. 

The scope of reactions catalyzed by metalacychc iridium-phosphoramidite complexes is remarkably broad, but reactions with some substrates, such as allylic alcohols, prochiral nucleophiles, branched allylic esters, and highly substituted allylic esters, that would form synthetically valuable products or would lead to simpler symthesis of reactants occur with low yields and selectivities. In addition, iridium-catalyzed allylic substitution reactions are sensitive to air and water and must be conducted with dry solvents under an inert atmosphere. Several advances have helped to overcome some, but not aU of these challenges. 

Allylic substitution reactions catalyzed by metalacyclic iridium-phosphoramidite complexes form branched products from linear allylic esters with high regioselec-tivity. However, reactions with racemic, branched allylic esters would be particularly valuable because they are readily accessible from a wide array of aldehydes and vinylmagnesium halides. However, iridium-catalyzed allylic substitution reactions of branched allylic esters have so far occurred with low enantioselectivities [45, 75]. 

Except for one recent example, all iridium-catalyzed allylic substitution reactions have been performed under an inert atmosphere with dry solvent and reagents. The iridium metalacycle is sensitive to protonation, which opens the metalacycle and results in the formation of a less-active complex containing a K -phosphoramidite ligand. A paper by Helmchen et al. addressed this issue [107]. Nearly all iridium catalysts used for allylic substitution consist of an iridium fragment chelated by COD. In the presence of a catalyst containing dibenzo[a,c]cyclooctatetraene (dbcot) in place of COD, allylic substimtion reactions occur in air with results that are comparable to those of reactions performed under an inert atmosphere (Scheme 35). 

Support-bound transition metal complexes have mainly been prepared as insoluble catalysts. Table 4.1 lists representative examples of such polymer-bound complexes. Polystyrene-bound molybdenum carbonyl complexes have been prepared for the study of ligand substitution reactions and oxidative eliminations [51], Moreover, well-defined molybdenum, rhodium, and iridium phosphine complexes have been prepared on copolymers of PEG and silica [52]. Several reviews have covered the preparation and application of support-bound reagents, including transition metal complexes [53-59]. Examples of the preparation and uses of organomercury and organo-zinc compounds are discussed in Section 4.1. 

Complexes of (( Ir(III) are kinetically inert and undergo octahedral substitution reactions slowly. The rate constant for aquation of [IrBr(NH3)5]2+ [35884-02-7] at 298 K has been measured at -2 x 10-10 s-1 (168). In many cases, addition of a catalytic reducing agent such as hypophosphorous acid greatly accelerates the rate of substitution via a transient, labile Ir(H) species (169). Optical isomers can frequently be resolved, as is the case of ot-[IrCl2(en)2]+ [15444-47-0] (170). Ir(III) amine complexes are photoactive and undeigo rapid photosubstitution reactions (171). Other iridium complexes... 

The cleavage of polynuclear hydroxo-bridged rhodium(III) and iridium(III) complexes into the corresponding mononuclear fragments has been reported in only a few instances, but the well-established tendency of mononuclear complexes of these metal ions to undergo substitution reactions with retention of configuration indicates the possibility of analytical and synthetic applications such as described above for chromium (III). 

A new phosphoramidite ligand (1 Y = OMe), gives high enantioselectivities (92-99% ee) and regioselectivities (99% S 2 ) in iridium-catalysed allylic substitution reactions of carbonates and acetates with carbanion or primary amine nucleophiles.6 The new ligand also leads to a faster rate of reaction than other phosphoramidite ligands. 

With respect to the derivatives of metal carbonyls, the substituted metal carbonyls of the VIB Group (e.g., Mo(CO)apya), the halogenocar-bonyls of iron, ruthenium, iridium, and platinum, the hydridocarbonyls H2Fe(CO)4 and HCo(CO)4 discovered in 1931 and 1934, and the nitrosyl carbonyls FelCOj NOjg and Co(CO)3NO were the most important (/). The known anionic CO complexes were limited to [HFe(CO)J and [Co(CO)J-. For studies of substitution reactions of metal carbonyls at this time, work was almost totally limited to reactions involving the classical N ligands such as NH3, en, py, bipy, and phen. 

The iridium(III) pentaamine complexes Pr(X)(NH3)5]2+ undergo octahedral substitution reactions in aqueous solution, similar to Co111 and Rh111 analogues.221 [Ir(X)(NH3)5]2+ (X = N03, Cl, Br, I) undergoes aquation (reaction 63) with the reactivity increasing in the order... 

---