Ionophores carriers

More recendy, two different types of nonglass pH electrodes have been described which have shown excellent pH-response behavior. In the neutral-carrier, ion-selective electrode type of potentiometric sensor, synthetic organic ionophores, selective for hydrogen ions, are immobilized in polymeric membranes (see Membrane technology) (9). These membranes are then used in more-or-less classical glass pH electrode configurations. 

A second source of inspiration for studying the open-chained equivalents of crown ethers was the observation that a number of naturally occurring antibiotics enhance cation transport and bear a structural similarity to open-chained crown ethers. A number of groups have examined neutral synthetic ionophores and a variety of novel cation carriers is now available. This is discussed in Sect. 7.4, below. 

FIGURE 10.38 Schematic drawings of mobile carrier and channel ionophores. 

Carrier ionophores most move from one side of the membrane to the other, acquiring the transported species on one side and releasing it on the other side. Channel ionophores span the entire membrane. 

Other mobile carrier ionophores include monensin and nonaetin (Figure 10.39). The unifying feature in all these structures is an inward orientation of polar groups (to coordinate the central ion) and outward orientation of non-... 

Recently, Shinkai and Manabe achieved the active transport of K+ using a new type of carrier 39 derived from diaza crown ether43, 44). The ionophore forms the zwitter-ionic species 39b, which is most lipophilic among other species (39a, 39c), at about neutral pH region, and it acts as effective ion carrier in the active transport... 

The carrier used in this transport system is only required to possess the nitrogen atom as a structural unit, which participates in the complexation. From the viewpoint of the simplicity in the structure, the development of new ionophores are expected. 

A certain crown ether having additional coordination sites for a trasition metal cation (71) changes the transport property for alkali metal cations when it complexes with the transition metal cation 76) (Fig. 13). The fact that a carrier can be developed which has a reversible complexation property for a transition metal cation strongly suggests that this type of ionophore can be applied to the active transport system. 

Many other cyclic and noncyclic organic carriers with remarkable ion selectivities have been used successfiilly as active hosts of various liquid membrane electrodes. These include the 14-crown-4-ether for lithium (30) 16-crown-5 derivatives for sodium bis-benzo-18-crown-6 ether for cesium the ionophore ETH 1001 [(R,R)-AA -bisd l-ethoxycarbonyl)undecyl-A,yVl-4,5-tctramcthyl-3,6-dioxaoctancdiamide] for calcium the natural macrocyclics nonactin and monensin for ammonia and sodium (31), respectively the ionophore ETH 1117 for magnesium calixarene derivatives for sodium (32) and macrocyclic thioethers for mercury and silver (33). 

However, there seems to be some drawback in the solubility or dispersibility of ion-sensing material in silicone rubber. This is mainly because silicone rubber does not contain a large quantity of plasticizer as the membrane solvent, in which neutral carriers can be dissolved easily, unlike in plasticized-PVC ion-sensing membranes. This issue is serious, especially with silicone-rubber membranes containing neutral carriers that show high crystallinity. Valinomycin, a typical ionophore, seems applicable to silicone-rubber-based K" -selec-tive electrodes [7,8,12-14]. Conventional crown-ether-based neutral carriers are also quite soluble in silicone rubber. 

A number of substances have been discovered in the last thirty years with a macrocyclic structure (i.e. with ten or more ring members), polar ring interior and non-polar exterior. These substances form complexes with univalent (sometimes divalent) cations, especially with alkali metal ions, with a stability that is very dependent on the individual ionic sort. They mediate transport of ions through the lipid membranes of cells and cell organelles, whence the origin of the term ion-carrier (ionophore). They ion-specifically uncouple oxidative phosphorylation in mitochondria, which led to their discovery in the 1950s. This property is also connected with their antibiotic action. Furthermore, they produce a membrane potential on both thin lipid and thick membranes. 

It is now recognised that a wide range of organic molecules, collectively termed ionophores 185,186) or complexones 187), are able to facilitate ion (usually cation) transport. Two major mechanisms have been revealed for this process, namely the involvement of transmembrane ion carriers and transmembrane pores or channels (see Fig. 19). The majority of ionophores studied to date are natural antibiotics and their synthetic analogues which are, on a biological scale, comparatively small molecules lending themselves to study outside the biological system. In contrast far less is known about the molecular structures involved in normal transport processes. Such molecules are likely to be more complex or present in small amounts and may require... 

Monesin binds with sodium ions and carries them across the cell membrane and is called a carrier ionophore. 

Carrier (left) and channel-forming modes of transport ionophors. 

The optical sensors are composed of ion-selective carriers (ionophores), pH indicator dyes (chromoionophores), and lipophilic ionic additives dissolved in thin layers of plasticized PVC. Ionophores extract the analyte from the sample solution into the polymer membrane. The extraction process is combined with co-extraction or exchange of a proton in order to maintain electroneutrality within the unpolar polymer membrane. This is optically transduced by a pH indicator dye (chromoionophore)10. 

In the case of co-extraction, a selective anion-carrier (ionophore) extracts the analyte anion into the lipophilic sensor membrane. In order to maintain electroneutrality, a proton is co-extracted into the membrane where it protonates a pH indicator dye contained in the polymer membrane. Due to protonation, the dye undergoes a change in either absorption or fluorescence. (Figure 6 and Tables 13 and 14). 

Solvent polymeric membranes, conventionally prepared from a polymer that is highly plasticized with lipophilic organic esters or ethers, are the scope of the present chapter. Such membranes commonly contain various constituents such as an ionophore (or ion carrier), a highly selective complexing agent, and ionic additives (ion exchangers and lipophilic salts). The variety and chemical versatility of the available membrane components allow one to tune the membrane properties, ensuring the desired analytical characteristics. 

Solvent polymeric membranes conventionally consist of ionophore, ion exchanger, plasticizer, and polymer. The majority of modem polymeric ISEs are based on neutral carriers, making the ionophore the most important membrane component. Substantial research efforts have focused on the development of highly selective ionophores for a variety of analytes [3], Some of the most successful ionophores relevant to biomedical applications are depicted in Fig. 4.1. 

P. Buhlmann, E. Pretsch, and E. Bakker, Carrier-based ion-selective electrodes and bulk optodes. 2. Ionophores for potentiometric and optical sensors. Chem. Rev. 98, 1593-1687 (1998). 

There appear to be two major ways by which ionophores aid ions to cross membrane barriers. Ionophores such as valinomycin and nonactin enclose the cation such that the outside of the complex is quite hydro-phobic (and thus lipid-soluble). The transport behaviour thus involves binding of the cation at the membrane surface by the antibiotic, followed by diffusion of the complexed cation across the membrane to the opposite surface where it is released. Such carrier type ionophores can be very efficient, with one molecule facilitating the passage of thousands of ions per second. A prerequisite for efficient transport by this type of ionophore is that both the kinetics of complex formation and dissociation be fast. 

The crowns as model carriers. Many studies involving crown ethers and related ligands have been performed which mimic the ion-transport behaviour of the natural antibiotic carriers (Lamb, Izatt Christensen, 1981). This is not surprising, since clearly the alkali metal chemistry of the cyclic antibiotic molecules parallels in many respects that of the crown ethers towards these metals. As discussed in Chapter 4, complexation of an ion such as sodium or potassium with a crown polyether results in an increase in its lipophilicity (and a concomitant increase in its solubility in non-polar organic solvents). However, even though a ring such as 18-crown-6 binds potassium selectively, this crown is expected to be a less effective ionophore for potassium than the natural systems since the two sides of the crown complex are not as well-protected from the hydro-phobic environment existing in the membrane. 

---