Ionomer inorganic nanoparticles

The group of GKSS Research Center Germany extensively researched the effect of a variety of inorganic nanoparticles on the properties of aromatic ionomer membranes [86-93]. Composite membranes were prepared from silicates and sulfonated poly(ether ketone)s or sulfonated poly(ether ether ketone)s. For DMFC applications, the composite membranes showed promising properties with lower methanol and water permeability and comparable (or higher) proton conductivity compared to the parent polymer membranes. The flux of water and methanol decreased with the increase in content of silicates. 

Most of the reported inorganic fillers used to modify Nafion are composite where the inorganic particles (usually nanoparticles) are located in the membrane bulk. Most of them are prepared using the recast method, where the filler nanoparticles dispersed in a solvent are mixed with Nafion ionomer dispersion in the same solvent or a compatible one. The solution is cast on a Petri dish or a plane surface at high temperature to form the recast composite membrane. An alternative method adopted to prepare Nafion composites with silica [31, 32, 41, 95], functionalized silica [35], and zirconium and titanium phosphate [41], is the in situ sol-gel reaction method, schematized in Fig. 6.5. 

Mauritz KA, Hassan MK (2007) Nanophase separated perfluorinated ionomers as sol-gel polymerization templates for functional inorganic oxide nanoparticles. Polym Rev 47 543-565... 

---