Ionic liquids potential window

Rogers FI, Sljukic B, Hardacre C, Compton RG (2009) Electrochemistry in room-temperature ionic liquids potential windows at mercury electrodes. J Chem Eng Data 54(7) 2049-2053. doi 10.1021/Je800898z... 

Ideally, one would prefer to compare anodic and cathodic potential limits instead of the overall ionic liquid electrochemical window, because difference sets of anodic and cathodic limits can give rise to the same value of electrochemical window (see Figure 3.6-1). However, the lack of a standard reference electrode system within and between ionic liquid systems precludes this possibility. Gonsequently, significant care must be taken when evaluating the impact of changes in the cation or anion on the overall ionic liquid electrochemical window. 

Ionic liquids possess a variety of properties that make them desirable as solvents for investigating electrochemical processes. They often have wide electrochemical potential windows they have reasonably good electrical conductivity and solvent transport properties they have wide liquid ranges and they are able to solvate a wide variety of inorganic, organic, and organometallic species. The liquid ranges ofionic liquids have been discussed in Section 3.1 and the solubility and solvation in Section 3.3. In this section we will deal specifically with the electrochemical properties of ionic liquids (electrochemical window, conductivity, and transport properties). We... 

A key criterion for selection of a solvent for electrochemical studies is the electrochemical stability of the solvent [12]. This is most clearly manifested by the range of voltages over which the solvent is electrochemically inert. This useful electrochemical potential window depends on the oxidative and reductive stability of the solvent. In the case of ionic liquids, the potential window depends primarily on the resistance of the cation to reduction and the resistance of the anion to oxidation. (A notable exception to this is in the acidic chloroaluminate ionic liquids, where the reduction of the heptachloroaluminate species [Al2Cl7] is the limiting cathodic process). In addition, the presence of impurities can play an important role in limiting the potential windows of ionic liquids. 

It must be noted that impurities in the ionic liquids can have a profound impact on the potential limits and the corresponding electrochemical window. During the synthesis of many of the non-haloaluminate ionic liquids, residual halide and water may remain in the final product [13]. Halide ions (Cl , Br , I ) are more easily oxidized than the fluorine-containing anions used in most non-haloaluminate ionic liquids. Consequently, the observed anodic potential limit can be appreciably reduced if significant concentrations of halide ions are present. Contamination of an ionic liquid with significant amounts of water can affect both the anodic and the cathodic potential limits, as water can be both reduced and oxidized in the potential limits of many ionic liquids. Recent work by Schroder et al. demonstrated considerable reduction in both the anodic and cathodic limits of several ionic liquids upon the addition of 3 % water (by weight) [14]. For example, the electrochemical window of dry [BMIM][BF4] was found to be 4.10 V, while that for the ionic liquid with 3 % water by weight was reduced to 1.95 V. In addition to its electrochemistry, water can react with the ionic liquid components (especially anions) to produce products... 

As shown in Figure 3.6-1, GC and Pt exhibit anodic and cathodic potential limits that differ by several tenths of volts. However, somewhat fortuitously, the electrochemical potential windows for both electrodes in this ionic liquid come out to be 4.7 V. What is also apparent from Figure 3.6-1 is that the GC electrode exhibits no significant background currents until the anodic and cathodic potential limits are reached, while the Pt working electrode shows several significant electrochemical processes prior to the potential limits. This observed difference is most probably due to trace amounts of water in the ionic liquid, which is electrochemically active on Pt but not on GC (vide supra). 

Tables 3.6-1 and 3.6-2 contain electrochemical potential windows for a wide variety of ionic liquids. Only limited information concerning the purity of the ionic liquids listed in Tables 3.6-1 and 3.6-2 was available, so these electrochemical potential windows must be treated with caution, as it is likely that many of the ionic liquids would have had residual halides and water present.

Table 3.6-2 The room-temperature electrochemical potential windows for binary and ternary chloroaluminate and related ionic liquids.

This is only one of some very promising potential non-synthetic applications of ionic liquids that have emerged recently. Many others - some more, some less fully documented in patent or scientific literature - have been published. Table 9-1 gives a few examples, showing that most of the non-synthetic applications of ionic liquids can be grouped into three areas. Electrochemical applications benefit from the wide electrochemical window of ionic liquids and/or from the distinct variation of con-... 

Recently, a eutectic mixture of choline chloride and urea (commercially known as Reline) was used as a medium from which CdS, as well as CdSe and ZnS, thin films were electrodeposited for the first time [53]. Reline is a conductive room-temperature ionic liquid (RTIL) with a wide electrochemical window. The voltammetric behavior of the Reline-Cd(II)-sulfur system was investigated, while CdS thin films were deposited at constant potential and characterized by photocurrent and electrolyte electroabsorbance spectroscopies. 

Heterogeneous ET reactions at polarizable liquid-liquid interfaces have been mainly approached from current potential relationships. In this respect, a rather important issue is to minimize the contribution of ion-transfer reactions to the current responses associated with the ET step. This requirement has been recognized by several authors [43,62,67-72]. Firstly, reactants and products should remain in their respective phases within the potential range where the ET process takes place. In addition to redox stability, the supporting electrolytes should also provide an appropriate potential window for the redox reaction. According to Eqs. (2) and (3), the redox potentials of the species involved in the ET should match in a way that the formal electron-transfer potential occurs within the potential window established by the transfer of the ionic species present at the liquid-liquid junction. The results shown in Figs. 1 and 2 provide an example of voltammetric ET responses when the above conditions are fulfilled. A difference of approximately 150 mV is observed between Ao et A" (.+. ... 

Table 5. Electrochemical stability window of ionic liquids (IL) at the glassy carbon (potentials [V/ expressed versus Ag/Agf 0.01M in DMSO reference) [26 /.

Table 5 shows cathodic and anodic limits of electrochemical stability windows of a number of ionic liquids. The cathodic limit of the stability window of the ILs based on the EMIm+ and BMIm+ cations, investigated at the glassy carbon electrode, is -2.1 V against the Ag/Ag+ (0.01M in DMSO) reference. The BMPy+ cation is reduced at the glassy carbon at considerably more positive potential, at ca. -1.0 V. 

The anodic oxidation of the tetrafluoroborate anion occurs at potentials higher than 2.1 V and the remaining hexafluorophosphate and imide anions are oxidised at potentials higher than 2.0 V. Hence, the stability window of the EMImBF4 and BMImBF4 is 4.2 V. Ionic liquids BMImPF6 and EMImN(Tf)2 shows a similar stability window of ca. 4.1 V. However, the window of the BMPyN(Tf)2, is considerably lower ca. 3.0 V. This is consistent with data (ca. 4.1-4.2 V) found for a series of ionic liquids based on EMIm+ and DMPIm+ (l,2-dimethyl-3-propylimidazolium) cations [12],... 

Recently, there has been considerable interest in developing molten salts that are less air and moisture sensitive. Melts such as l-methyl-3-butylimidazolium hexa-fluorophosphate [211], l-ethyl-3-methylimidazolium trifluoromethanesulfonate [212], and l-ethyl-3-methylimidazolium tetrafluoroborate [213] are reported to be hydro-phobic and stable under environmental conditions. In some cases, metal deposition from these electrolytes has been explored [214]. They possess a wide potential window and sufficient ionic conductivity to be considered for many electrochemical applications. Of course if one wishes to take advantage of their potential air stability, one loses the opportunity to work with the alkali and reactive metals. Further, since these ionic liquids are neutral and lack the adjustable Lewis acidity common to the chloroaluminates, the solubility of transition metal salts into these electrolytes may be limited. On a positive note, these electrolytes are significantly different from the chloroaluminates in that the supporting electrolyte is not intended to be electroactive. 

---