Hydrogen reaction with iodine

At 225—275°C, bromination of the vapor yields bromochloromethanes CCl Br, CCl2Br2, and CClBr. Chloroform reacts with aluminum bromide to form bromoform, CHBr. Chloroform cannot be direcdy fluorinated with elementary flourine fluoroform, CHF, is produced from chloroform by reaction with hydrogen fluoride in the presence of a metallic fluoride catalyst (8). It is also a coproduct of monochlorodifluoromethane from the HF—CHCl reaction over antimony chlorofluoride. Iodine gives a characteristic purple solution in chloroform but does not react even at the boiling point. Iodoform, CHI, may be produced from chloroform by reaction with ethyl iodide in the presence of aluminum chloride however, this is not the route normally used for its preparation. 

Fluorine reacts explosively by a radical chain reaction as soon as the gases are mixed. A mixture of hydrogen and chlorine explodes when exposed to light. Bromine and iodine react with hydrogen much more slowly. A less hazardous laboratory source of the hydrogen halides is the action of a nonvolatile acid on a metal halide, as in... 

The Leukart reaction has also been used in the conversion of dehydroepiandro-sterone into 17/3-formylamino-3/3-formyloxyandrost-5-ene, which on reduction with lithium aluminium hydride afforded 3/3-hydroxy-17/3-me thylaminoandrost-5-ene. Acylation with isocaproyl chloride then furnished the N-methyl-N-isocaproyl steroid (197), after selective ester hydrolysis of the initially formed ON-diacyl derivative. The amide (197) was further converted into its 3,5-cyclo-6-ketone via the 3,5-cyclo-6/3-alcohol and thence by reaction with hydrogen bromide into the corresponding 3/3-bromo-5a-6-ketone which upon dehydrobromination furnished a A2-5a-6-ketone and ultimately the 2-monoacetate of the 2/3,3/3-diol (198) after reaction with silver acetate and iodine. Hydrolysis to the 2/3,3/3-diol (198) gave a separable mixture of the 2/3,3/8-dihydroxy-5a- and -5/3-ketones.88... 

The chemical reaction rate r = d /d(, measured in mols , depends on the concentrations of reactants as well as on the concentrations of products. For a simple reaction, if all the partners are in a gaseous state, e.g. the reaction of iodine vapour with hydrogen gas,... 

Scheme 20 Main equilibria involved in the hydrolytic disproportionation of iodine and reaction with hydrogen peroxide.

The reaction with fluorine occurs spontaneously and explosively, even in the dark at low temperatures. This hydrogen—fluorine reaction is of interest in rocket propellant systems (99—102) (see Explosives and propellants, propellants). The reactions with chlorine and bromine are radical-chain reactions initiated by heat or radiation (103—105). The hydrogen-iodine reaction can be carried out thermally or catalyticaHy (106). 

Hydroiodic acid, the colorless solution formed when hydrogen iodide gas dissolves in water, is prepared by reaction of iodine with hydrogen sulfide or hydrazine or by an electrolytic method. Typically commercial hydroiodic acid contains 40—55% HI. Hydroiodic acid is used in the preparation of iodides and many organic iodo compounds. 

Preparation. Thiophosgene forms from the reaction of carbon tetrachloride with hydrogen sulfide, sulfur, or various sulfides at elevated temperatures. Of more preparative value is the reduction of trichi oromethanesulfenyl chloride [594-42-3] by various reducing agents, eg, tin and hydrochloric acid, staimous chloride, iron and acetic acid, phosphoms, copper, sulfur dioxide with iodine catalyst, or hydrogen sulfide over charcoal or sihca gel catalyst (42,43). 

Additions of halogen fluorides to the more electrophilic perfluonnated olefins generally require different conditions Reactions of iodine fluoride, generated in situ from iodine and iodine pentafluoride [62 102 103, /05] or iodine, hydrogen fluoride, and parapeiiodic aud [104], with fluormated olefins (equations 8-10) are especially well studied because the perfluoroalkyl iodide products are useful precursors of surfactants and other fluorochemicals Somewhat higher temperatures are required compared with reactions with hydrocarbon olefins Additions of bromine fluoride, from bromine and bromine trifluonde, to perfluonnated olefins are also known [lOti]... 

---