Intramolecular tricyclization

Cyclic amines react with diethyl oxalate to form bi-and tricyclic amides, e.g., (62) and (63), while l,8-bis(carboxymethyl)-cyclam forms the intramolecular tricyclic lactam (64).62... 

Unlike the intermolecular reaction, the intramolecular aminopalladation proceeds more easily[13,14,166], Methylindole (164) is obtained by the intramolecular exo amination of 2-allylaniline (163). If there is another olefinic bond in the same molecule, the aminopalladation product 165 undergoes intramolecular alkene insertion to give the tricyclic compound 166[178]. 2,2-Dimethyl-l,2-dihydroquinoline (168) is obtained by endo cyclization of 2-(3,3-dimethyiallyl)aniline (167). The oxidative amination proceeds smoothly... 

A interesting and useful reaetion is the intramolecular polycyclization reaction of polyalkenes by tandem or domino insertions of alkenes to give polycyclic compounds[l 38]. In the tandem cyclization. an intermediate in many cases is a neopentylpalladium formed by the insertion of 1,1-disubstituted alkenes, which has no possibility of /3-elimination. The key step in the total synthesis of scopadulcic acid is the Pd-catalyzed construction of the tricyclic system 202 containing the bicyclo[3.2. Ijoctane substructure. The single tricyclic product 202 was obtained in 82% yield from 201 [20,164). The benzyl chloride 203 undergoes oxidative addition and alkene insertion. Formation of the spiro compound 204 by the intramolecular double insertion of alkenes is an exam-ple[165]. 

Similarly to alkenes. alkynes also insert. In the reaction of 775 carried out under a CO atmosphere in AcOH, sequential insertions of alkyne, CO. alkene. and CO take place in this order, yielding the keto ester 776[483]. However, the same reaction carried out in THF in the presence of LiCl affords the ketone 777, but not the keto ester[484]. The tricyclic terpenoid hirsutene (779) has been synthesized via the Pd-catalyzed metallo-ene carbonylation reaction of 778 with 85% diastereoselectivity as the key reaction[485], Kainic acid and allo-kainic acid (783) have been synthesized by the intramolecular insertion ol an alkene in 780, followed by carbonylation to give 781 and 782[486],... 

Another interesting transformation is the intramolecular metathesis reaction of 1,6-enynes. Depending on the substrates and catalytic species, very different products are formed by the intramolecular enyne metathesis reaction of l,6-enynes[41]. The cyclic 1,3-diene 71 is formed from a linear 1,6-enyne. The bridged tricyclic compound 73 with a bridgehead alkene can be prepared by the enyne metathesis of the cyclic enyne 72. The first step of... 

Some tricyclic systems have been prepared by intramolecular cyclization from A-aryl-pyrazoles carrying substituents both in the pyrazole ring at C-5 and in the phenyl ring at the o-position. Thus pyrazolo[l,5-n]quinazolines (563) (69JHC947) and pyrazolo[l,5-n]-[l,4]benzodiazepines (564) (77JHC1163, 77JHC1171) can be prepared from suitable precursors. 

On heating at 225°C, 5-aUykyclohexa-l,3-diene, A, undergoes intramolecular cycloaddition to give the tricyclic nonene B. The mechanism of formation of B was probed using the deuterium-labeled sample of A which is shown. Indicate the position of deuterium labels in product B if the reaction proceeds by (a) a [2 - - 2] cycloaddition or (b) a [4 -t- 2] cycloaddition. 

Even in tricyclic bis-imidazole 57, for which the potential imino-tautomer 57b would be stabilized by the intramolecular N-H -N bond, the only observable form is the amino tautomer 57a (Scheme 30) [73KGS807 76AHC(S1), p. 431]. 

The smooth intramolecular nucleophilic displacement of biphenyl carboxylic acids leading to benzocoumarins (See Section II.A.) inspired also investigation of the behavior of similar diphenyl ether, diphenyl sulfide and A-methyldiphenyl amine derivatives 458 under similar conditions. However, all these attempts to achieve cyclization to tricyclic compounds 459 were unsuccessful, probably due to the unfavorable stereochemistry for the formation of the required seven-mem-bered transition states and also to the presence of the deactivating bridge groups X (Eq. 42) [68JCS(C)1030]. 

As an extension of this reaction the intramolecular cycloaddition of 5-propynyloxycycloalkanepyrimidines was studied. It was found that bi-and tricyclic annelated pyridine derivatives are formed by expulsion of either X-CH2-CN and/or HCN, respectively. A marked selectivity in the product formation was observed, depending on the size of the cycloalkane ring. With cyclohexapyrimidines a mixture of A and B is formed, while with the cycloheptapyrimidine derivative exclusive formation of the tricyclic compound B takes place (92T1643, 92T1657) (Scheme 39a). 

This tricyclic ring system was prepared from the functionalized pyrazo[l,5-n]pyridines. Thus, pyrazo[l,5-n]pyridine-3-carboxylate 462 gave 465 upon mesylation and subsequent reaction with 2-ethoxy-2-lithioxyethy-lene, whose cyclization afforded 466 (94AP435). Intramolecular aldol... 

Intramolecular cycloadditions of substrates with a cleavable tether have also been realized. Thus esters (37a-37d) provided the structurally interesting tricyclic lactones (38-43). It is interesting to note that the cyclododecenyl system (w = 7) proceeded at room temperature whereas all others required refluxing dioxane. In each case, the stereoselectivity with respect to the tether was excellent. As expected, the cyclohexenyl (n=l) and cycloheptenyl (n = 2) gave the syn adducts (38) and (39) almost exclusively. On the other hand, the cyclooctenyl (n = 3) and cyclododecenyl (n = 7) systems favored the anti adducts (41) and (42) instead. The formation of the endocyclic isomer (39, n=l) in the cyclohexenyl case can be explained by the isomerization of the initial adduct (44), which can not cyclize due to ring-strain, to the other 7t-allyl-Pd intermediate (45) which then ring-closes to (39) (Scheme 2.13) [20]. While the yields may not be spectacular, it is still remarkable that these reactions proceeded as well as they did since the substrates do contain another allylic ester moiety which is known to undergo ionization in the presence of the same palladium catalyst. 

The importance of the 1,3-dipolar cycloaddition reaction for the synthesis of five-membered heterocycles arises from the many possible dipole/dipolarophile combinations. Five-membered heterocycles are often found as structural subunits of natural products. Furthermore an intramolecular variant makes possible the formation of more complex structures from relatively simple starting materials. For example the tricyclic compound 10 is formed from 9 by an intramolecular cycloaddition in 80% yield ... 

DinitrQ-ll-Qxatricyclo[6 2 1 0 undec-9-ene has been prepared by an intramolecular Diels-Alder reacdon of the furan with a idtroalkene group as shown in Eq 8 26 This tricyclic compound is a versatile synthedc tool for the preparadon of ergot alkaloids... 

Further intramolecular addition of the C8 carbocation to the 13,14 double bond occurs with nonHMarkovnikov regio-chemistry and gives a tricyclic secondary carbocation at Cl3. 

Tricyclic 84 was prepared [91JCS(P1)1762] by the thermal intramolecular rearrangement of dichloro(pyrrolidinylcycloheptenyl)triazine 83. Its structure was confirmed by X-ray crystallography (Scheme 21). 

The reactions of the lithium enolates of substituted 2-cyclohexenones and 2-cyclopentenones with ( )-l-nitropropene give a mixture of syn- and ami-products3. The lithium enolate of 3,5,5-trimethyl-2-cyclohexenone gives a mixture of the syn- and //-3.5,5-trimethyl-6-(l-methyl-2-nitroethyl)-2-cyclohexcnoncs in modest diastereoselection when the reaction mixture is quenched with acetic acid after. 30 minutes at —78 =C. When the reaction mixture is heated to reflux, tricyclic products are obtained resulting from intramolecular Michael addition of the intermediate nitronate ion to the enone moiety. 

Thus, the dianion derived from a-amino acid substitutes the /1-chloride to give the ester of 2-(phenylsulfonyl)ethenyl amino acid and subsequent desulfonylation provides N-(benzoyl)vinylalanine methyl ester (62) (equation 61). The conjugate addition of enolates to methyl styryl sulfone (63) and subsequent intramolecular addition to the carbonyl moiety provide a synthetically valuable method for the construction of bicyclic and tricyclic skeletons52. Desulfonylation of the cyclization product 64 with sodium in ethanol-THF gives the diene 65 in good yield (equation 62). 

J-Oxygen-functionalised sp3 organolithium compounds react with alkenyl-carbene complexes to generate the corresponding cyclic carbene complexes in a formal [3+3] process (see Sect. 2.8.1). In those cases where the organolithium derivative contains a double bond in an appropriate position, tricyclic ether derivatives are the only products isolated. These compounds derive from an intramolecular cyclopropanation of the corresponding cyclic carbene complex intermediate [89] (Scheme 83). 

The Diels-Alder cycloaddition is the best-known organic reaction that is widely used to construct, in a regio- and stereo-controlled way, a six-membered ring with up to four stereogenic centers. With the potential of forming carbon-carbon, carbon-heteroatom and heteroatom-heteroatom bonds, the reaction is a versatile synthetic tool for constructing simple and complex molecules [1], Scheme 1.1 illustrates two examples the synthesis of a small molecule such as the tricyclic compound 1 by intermolecular Diels-Alder reaction [2] and the construction of a complex compound, like 2, which is the key intermediate in the synthesis of (-)chlorothricolide 3, by a combination of an intermolecular and an intramolecular Diels-Alder cycloaddition [3]. 

Radical Diels-Alder reactions have been used mainly to synthesize polycyclic molecules. These reactions, like those that involve cations and anions as components, proceed quickly but generally do not give high yields. Thus, the tricyclic enone 14 is the result of an intramolecular Diels-Alder reaction of quenched vinyl radical intermediate 13 obtained by treating the iododienynone 12 with n-tributyltin hydride/2,2 -azobisisobutyronitrile (AIBN) [28] (Equation 1.11). 

Intramolecular cycloadditions of furans are a useful method for creating an oxygenated cyclohexane ring in rigid cycloadducts. Thus, a MeAICI2-catalyzed intramolecular reaction [40] of compounds 34 leads stereoselectively to tricyclic cycloadducts (Equation 3.8). The reaction yield is strongly dependent on the quantity of the catalyst and the type of substituent at the olefmic double bond. Cycloadduct 35 (R = R2 = Me, Ri = R3 = R4 = H) was then converted [40b] into 1,4-epoxycadinane (36). 

The synthesis of highly substituted rigid tricyclic nitrogen heterocycles via a tandem four-component condensation (the Ugi reaction)/intramolecular Diels-Alder reaction was investigated in both solution and solid phase [24]. The Ugi reaction in MeOH (Scheme 4.2) involves the condensation of furylaldehydes 17, benzylamine 18, benzyl isocyanide 19 and maleic or fumaric acid derivatives 20, and provides the triene 21 which immediately undergoes an intramolecular Diels-Alder reaction, affording the cycloadduct 22 in a diastereoisomeric mixture with high yield. 

---