Interference advantage

Method Gas liquid continuous method detection limit interferences advantages /disadvantages literature... 

The discussion of interferences, advantages, and disadvantages of both methods indicates the clinical relevance of several parameters. Figure 23-25 displays the essentials of the normal capnographic waveform, where point D is the maximum partial pressure at the end of exhalation. 

When the analytical method s selectivity is insufficient, it may be necessary to separate the analyte from potential interferents. Such separations can take advantage of physical properties, such as size, mass or density, or chemical properties. Important examples of chemical separations include masking, distillation, and extractions. 

One advantage of the E ion-selective electrode is its freedom from interference. The only significant exception is OH (kip-zon- = 0-1), which imposes a maximum pH limit for a successful analysis. 

Selectivity The analysis of closely related compounds, as we have seen in earlier chapters, is often complicated by their tendency to interfere with one another. To overcome this problem, the analyte and interferent must first be separated. An advantage of chemical kinetic methods is that conditions can often be adjusted so that the analyte and interferent have different reaction rates. If the difference in rates is large enough, one species may react completely before the other species has a chance to react. For example, many enzymes selectively cat-... 

A major advantage of this hydride approach lies in the separation of the remaining elements of the analyte solution from the element to be determined. Because the volatile hydrides are swept out of the analyte solution, the latter can be simply diverted to waste and not sent through the plasma flame Itself. Consequently potential interference from. sample-preparation constituents and by-products is reduced to very low levels. For example, a major interference for arsenic analysis arises from ions ArCE having m/z 75,77, which have the same integral m/z value as that of As+ ions themselves. Thus, any chlorides in the analyte solution (for example, from sea water) could produce serious interference in the accurate analysis of arsenic. The option of diverting the used analyte solution away from the plasma flame facilitates accurate, sensitive analysis of isotope concentrations. Inlet systems for generation of volatile hydrides can operate continuously or batchwise. 

Thermal ionization has three distinct advantages the ability to produce mass spectra free from background interference, the ability to regulate the flow of ions by altering the filament temperature, and the possibility of changing the filament material to obtain a work function matching ionization energies. This flexibility makes thermal ionization a useful technique for the precise measurement of isotope ratios in a variety of substrates. 

Snap-Fit and Press-FitJoints. Snap-fit joints offer the advantage that the strength of the joint does not diminish with time because of creep. Press-fit joints are simple and inexpensive, but lose hoi ding power. Creep and stress relaxation reduce the effective interference, as do temperature variations, particularly with materials with different thermal expansions. 

The advantages of homogenous immunoassays are simple formats and rapid data output producing user-friendly and cost-effective products. Technical challenges to consider, however, are the necessity to remove or minimize background interference from the reagents and nonspecific binding reactions. 

Modulation contrast, like DIG, is a shearing method with the same advantages and disadvantages except that interference colors are absent with modulation contrast. The resolution, in spite of the restricted condenser aperture, is certainly not reduced. If anything, resolution seems to be improved and the images obtained have an excellent quaUty, especially in regard to contrast, one not seen with any other technique except the much more expensive video-enhanced imaging. 

The advantage of this test is that it is quick and easy to do, and gives an indication of biodegradation potential. However, the test is not definitive, because any impurities in the plastic, such as plasticizers and solvents, may interfere with the test by promoting growth, and thus give false positive results. 

The second method is the flow-coulometry and can be applied to orthophosphates with concentrations of 5x10 1x10 M contained in the interstitial water in sediments. The advantage of this method is that only small amounts of sample ( 100 p.1) are needed and the analytical results are entirely free from interference due to silicate ions. 

In urban districts, installation of impressed current anodes near the surface is usually very difficult because of the interference of nearby installations. Here the installation of deep anodes in suitable soils is recommended these also have the advantage of being able to be installed in the track of the supply line (see Section 9.1.3). 

---