Instrumentation layout

Figure 1. Overall instrument layout showing (A) Instron 1125 universal tester (B) Zymark laboratory robots (C) Specimen bar magazine (D) Specimen bar measuring device.

Instrumental layouts and developments in AMS are reviewed by Kutschera.195 Today AMS is the most powerful, sensitive and selective mass spectrometric technique for measuring long-lived radionuclides at the level of natural isotopic abundances (10-16 to 10-12). Accelerator mass spectrometry (AMS) allows uranium isotope ratio measurements with an abundance sensitivity for 236U in the range of l(rlo-10 l2.l98J"... 

NIR tunable diode laser instrument layouts. (Courtesy of Analytical Specialties for Norsk Elek-tro Optikk AS.)... 

Instrumentation layout for the tests is shown schematically in Figure 12. Instrumentation for the Group 5 Suppressive Shield tests is tabulated in Table III. Burning time was measured using photocells in the shield wall. Thermocouples in the bulk pyrotechnic were used to obtain an indication when the material was completely burned. Static overpressure was measured on large charges to estimate confinement effects. Radiant heat flux outside the shield was measured with Keithley 86o flux meters. 

Instrument Layout (Location) and Cable/Tubing Routing Drawings.583... 

Instrument layout (location) and cable/tubing routing drawings... 

Fig, 3.2 The Institut Laue Langevin (ILL, Grenoble, France) showing the instrument layout. Those used for vibrational spectroscopy (INlBeF, IN4, IN6) are shown in bold. Reproduced from [6] with permission fi om the Institut Laue-Langevin. 

Fig. 2.10 Diagram of instrument layout for column switching screening.

In previous sections of this chapter, we have discussed aspects of test and survey layout. The time investment to produce a visually appealing layout improves the data quality and minimizes problems caused by respondents confusion, misinterpretation, or misunderstanding of items. Some suggestions for improving instrument layout include ... 

Actually, that injure iUustrates the instrument layout pretty clearly... 

This step is closely related to Step la, but focuses more on lessons learned and best practices on topics such as instrument layout and LRU display characteristics. 

The instrumentation layout is described in Figs. 6.3 and 6.4. Two complementary accelerometers are used on the table. 

The same instrumentation layout was used for all four walls. 

Figure 14.17 Schematic of instrumental layout for nanosecond flash photolysis for collection of luminescence lifetime.

Specific instruments have been developed to enable the detection of the faint and usually extended emission of interstellar nebulae, as well as the narrow spectral lines, that can appear either as emission or absorption features. The key parameters for such studies are the spatial and spectral resolution of the instmments, their wavelength coverage and sensitivity. Depending on the wavelength domain, specific detectors and instrument layout must be used that take advantage of the most recent advances in light collecting and detection. 

Figure 3.21 Illustration of the instrument layout for the first published PTR-MS instrument containing a TOF-MS analyser [58]. Reproduced with permission from [57]. Copyright 2004, American Chemical Society.

---