Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Instrument clusters

Kodak is commercialising its low molecular weight OLEDs for use in both passive and active matrix display architectures. It has also licensed its technology to Pioneer Corp who have commercialised passive matrix displays for car radios and cellular phone displays. TDK has displays for cellular phones, personal digital assistants and car instrumentation clusters. Perhaps the most significant collaboration to date has been with Sanyo. Sanyo s capabilities in low-temperature polycrystalline silicon have been married with Kodak s low MW materials to produce a full colour, 5 inch active matrix display, commercialisation of which was expected in 2001. [Pg.238]

The first flight of the Reel Down system took place on 15 September 1982 from the National Scientific Balloon Facility in Palestine, Texas. When the balloon was properly positioned for the descent phase of the experiments, a pin locking the suspended instrument cluster to the winching system was pulled and the controlled descent phase was initiated by releasing a magnetically controlled brake. Descent velocity was selectable by command from the ground. A line velocity of 7 1 m/sec was used for the experiment reported here. A full treatment of mechanical and electronic systems, as well as the data analysis regarding the dynamics of the system, appears elsewhere [19]. [Pg.365]

We begin this section with discussions of the roles that workstations, instrument clusters, and workceHs have in laboratory automation, followed by discussions of specimen transportation, automated specimen processing, automated specimen sorting, and automated specimen storage and retrieval subsystems. [Pg.281]

Figure 11 -8 A workstation configured with a duster of unlike instruments theoretically allows one technologist to operate and monitor the functions of several unlike analyzers.The software provided for the central control module is vitally important for successful implementation of such a configuration. Central control modules for this type of instrument cluster are under development by some LIS vendors and independent system integrators. (From Boyd jC, Felder RA, Savory. Robotics and the changing face of the clinical laboratory. Clin Chem 1996 42 1901-10.)... Figure 11 -8 A workstation configured with a duster of unlike instruments theoretically allows one technologist to operate and monitor the functions of several unlike analyzers.The software provided for the central control module is vitally important for successful implementation of such a configuration. Central control modules for this type of instrument cluster are under development by some LIS vendors and independent system integrators. (From Boyd jC, Felder RA, Savory. Robotics and the changing face of the clinical laboratory. Clin Chem 1996 42 1901-10.)...
Possible causes No voltage (fuse shutoff) Combined instrument failure Failure of wiring harness between instrument cluster and ECU unit... [Pg.380]

Test other wiring harness and instrument cluster indicator lamp... [Pg.380]

Test the instrument cluster power-supply system and grounding system (fuse), then go to step 5. [Pg.380]

Shut off ECU connector clip Shut off the instrument cluster plug. [Pg.382]

Connect the ECU plug terminal 5,7,9 and instrument cluster plug ... [Pg.382]

Truck Cab Door Fascia, Instrument Cluster Fascia Snowmobile Shrouds and Windshields, Golf Cart Shrouds, Seats, Trays... [Pg.303]

Common applications for transfer tapes include the assembly of membrane switches used in the electronic industry, the attachment of face plates to appliances and other equipment, the assembly of automotive displays in the instrument cluster, and the assembly of displays, such as touch screens for computers and teller machines. Fig. 18 pictures the use of a transfer tape adhesive in the assembly of a membrane switch. [Pg.521]

Automotive Large volumes of mica are currently used in production of blow molded seat backs for cars and trucks. Injection molded parts include glove boxes, battery trays, fan shrouds, fender liners, and instrument cluster housings. Mica-reinforced polyurethane/polyurea has been used successfully since 1994 in automotive fascia and fenders. [Pg.51]

The FLD-system provides an estimate of the fuel volume in the fuel tank to the driver along with a warning if the fuel volume drops below a predefined value. The functionality provided by the FLD-system is distributed across three Electronic Control Unit (ECU)-systems, i.e. an ECU with sensors and actuators, in the Electronic/Electrical (E/E)-system Engine Management System (EMS), Instrument Cluster (ICL), and Coordinator (COO). The ECU-systems also interact with the fuel tank that is outside of the E/E-system. COO estimates the fuel volume in the tank by relying on the output of a Kalman filter that, in turn, relies on a signal of a sensor measuring the fuel level in the tank and an estimate of the current fuel consumption provided by EMS, as inputs. The estimated fuel... [Pg.167]

See other pages where Instrument clusters is mentioned: [Pg.345]    [Pg.364]    [Pg.281]    [Pg.281]    [Pg.282]    [Pg.282]    [Pg.282]    [Pg.401]    [Pg.273]    [Pg.274]    [Pg.59]    [Pg.138]    [Pg.139]    [Pg.6]    [Pg.339]    [Pg.340]    [Pg.56]    [Pg.442]    [Pg.273]    [Pg.274]    [Pg.312]   
See also in sourсe #XX -- [ Pg.281 , Pg.282 ]



SEARCH



© 2024 chempedia.info