Insertion aryls

The above examples describing the use of metals as catalysts for a variety of reactions in fullerene chemistry reveal the potential they have to afford new and unprecedented fullerene derivatives in an efficient and straightforward manner. The former chemical modification of pristine fullerenes was directed to the preparation of fullerene derivatives suitably functionalized to be tested in the search for properties and practical applications. In this regard, most of the classical reactions available in the arsenal of the organic chemistry were tested. However, important issues in fullerene chemistry such as selectivity and chirality had not been previously addressed in the appropriate way till the advent of metals in chemical reactions involving fullerenes. In this regard, in addition to the ease of preparation of some fullerene derivatives by metal-catalyzed reactions such as carbene insertions, arylations, and PK reaction, other important aspects such as the site. 

Several organorhodium(l) complexes of the general formula RhR(PPh3)2(CO) (R=/>-tolyl, o-tolyl. Me) were isolated and were shown to insert aryl aldehydes into the aryl-rhodium(l) bond (Scheme 24). ... 

If, however, a tertiary amine has two alkyl groups and also an aryl group having the para position unsubstituted, then the action of nitrous acid is to insert the nitroso group directly into this para position. Dimethylaniline, for example, when treated with nitrous acid readily gives p-nitrosodimethyl-... 

Tertiary amines containing one alkyl and two aryl groups, such as mono-I ncthyldiphenyhiniir.e, Cl l3(C, l l.diX , arc rarely encountered and arc unimportant. They usually react with nitrous acid with the insertion of a nitroso group into only one of the two available para positions monomethyl-diphenylamine thus gives monomethyl-mono - pnitroso-diphenylamine. Cl hj(C.ill .)N C l 1 jXO, or V-nicthyl-p-nitrosodiphcnylaniine. 

Mechanistic studies show that the arylation of alkenes proceeds via the palladation of aromatic compounds to form a rr-aryl-Pd bond (261), into which insertion of alkene takes place to form 262. The final step is i3-elimina-tion to form the arylated alkenes 259 and Pd(0). 

Three oxidative reactions of benzene with Pd(OAc)2 via reactive rr-aryl-Pd complexes are known. The insertion of alkenes and elimination afford arylalk-enes. The oxidative functionalization of alkenes with aromatics is treated in Section 2.8. Two other reactions, oxidative homocoupling[324,325] and the acetoxylation[326], are treated in this section. The palladation of aromatic compounds is possible only with Pd(OAc)2. No reaction takes place with PdCl2. 

The facile insertion of CO takes place. The 2-aryl-3-indazolone 484 is obtained in high yields from the azobenzene complex 463 in alcohol or waterf442]. For unsymmetrically substituted 4-methyl, 4-chloro-, and 4-meth-... 

In Grignard reactions, Mg(0) metal reacts with organic halides of. sp carbons (alkyl halides) more easily than halides of sp carbons (aryl and alkenyl halides). On the other hand. Pd(0) complexes react more easily with halides of carbons. In other words, alkenyl and aryl halides undergo facile oxidative additions to Pd(0) to form complexes 1 which have a Pd—C tr-bond as an initial step. Then mainly two transformations of these intermediate complexes are possible insertion and transmetallation. Unsaturated compounds such as alkenes. conjugated dienes, alkynes, and CO insert into the Pd—C bond. The final step of the reactions is reductive elimination or elimination of /J-hydro-gen. At the same time, the Pd(0) catalytic species is regenerated to start a new catalytic cycle. The transmetallation takes place with organometallic compounds of Li, Mg, Zn, B, Al, Sn, Si, Hg, etc., and the reaction terminates by reductive elimination. 

In the reaction of Q,/3-unsaturated ketones and esters, sometimes simple Michael-type addition (insertion and hydrogenolysis, or hydroarylation, and hydroalkenylation) of alkenes is observed[53,54]. For example, a simple addition product 56 to methyl vinyl ketone was obtained by the reaction of the heteroaromatic iodide 55[S5]. The corresponding bromide affords the usual insertion-elimination product. Saturated ketones are obtained cleanly by hydroarylation of o,/3l-unsaturated ketones with aryl halides in the presence of sodium formate, which hydrogenolyses the R—Pd—I intermediate to R— Pd—H[56]. Intramolecular hydroarylation is a useful reaction. The diiodide 57 reacts smoothly with sodium formate to give a model compound for the afla-toxin 58. (see Section 1.1.6)[57]. Use of triethylammonium formate and BU4NCI gives better results. 

The alkenyloxirane 126 in excess reacts with aryl and alkenyl halides or triflates in the presence of sodium formate to afford the allylic alcohol 127[104], Similarly, the reaction of the alkenyloxetane 128 gives the homo-allylic alcohol 130[105]. These reactions can be explained by insertion of the double bond in the Ar—Pd bond, followed by ring opening (or /3-eliraination) to form the allylic or homoallylic alkoxypalladium 129, which is converted into the allylic 127 or homoallylic alcohol 130 by the reaction of formate. The 3-alkenamide 132 was obtained by the reaction of the 4-alkenyl-2-azetizinone 131 with aryl iodide and sodium formate [106]. 

An efficient carboannulation proceeds by the reaction of vinylcyclopropane (135) or vinylcyclobutane with aryl halides. The multi-step reaction is explained by insertion of alkene, ring opening, diene formation, formation of the TT-allylpalladium 136 by the readdition of H—Pd—I, and its intramolecular reaction with the nucleophile to give the cyclized product 137[I08]. 

The diazonium salts 145 are another source of arylpalladium com-plexes[114]. They are the most reactive source of arylpalladium species and the reaction can be carried out at room temperature. In addition, they can be used for alkene insertion in the absence of a phosphine ligand using Pd2(dba)3 as a catalyst. This reaction consists of the indirect substitution reaction of an aromatic nitro group with an alkene. The use of diazonium salts is more convenient and synthetically useful than the use of aryl halides, because many aryl halides are prepared from diazonium salts. Diazotization of the aniline derivative 146 in aqueous solution and subsequent insertion of acrylate catalyzed by Pd(OAc)2 by the addition of MeOH are carried out as a one-pot reaction, affording the cinnamate 147 in good yield[115]. The A-nitroso-jV-arylacetamide 148 is prepared from acetanilides and used as another precursor of arylpalladium intermediate. It is more reactive than aryl iodides and bromides and reacts with alkenes at 40 °C without addition of a phosphine ligandfl 16]. 

A cr-aryl-Pd bond is formed by the transfer of an aryl group even from arylphosphines to Pd and alkene insertion takes placefl 17-119], This reaction is slow and it is not a serious problem when triarylphosphine is used as a ligand. The cinnamate 149 is obtained by the reaction of PhsP with acrylate in the presence of Pd(OAc)2 in AcOH. 

I.l.IJ Reactions nitlr 1,2-, 1.3-. ami 1.4-dienes. The reaction of conjugated dienes with aryl and alkenyl halides can be explained by the following mechanism. Insertion of a conjugated 1.3-diene into an aryl or alkenylpalladium bond gives the T-allvlpalladium complex 243 as an intermediate, which reacts further... 

When allene derivatives are treated with aryl halides in the presence of Pd(0), the aryl group is introduced to the central carbon by insertion of one of the allenic bonds to form the 7r-allylpalladium intermediate 271, which is attacked further by amine to give the allylic amine 272. A good ligand for the reaction is dppe[182]. Intramolecular reaction of the 7-aminoallene 273 affords the pyrrolidine derivative 274[183]. 

Terminal alkynes undergo the above-mentioned substitution reaction with aryl and alkenyl groups to form arylalkynes and enynes in the presence of Cul as described in Section 1.1.2.1. In addition, the insertion of terminal alkynes also takes place in the absence of Cul, and the alkenylpalladium complex 362 is formed as an intermediate, which cannot terminate by itself and must undergo further reactions such as alkene insertion or anion capture. These reactions of terminal alkynes are also treated in this section. 

Many examples of insertions of internal alkynes are known. Internal alkynes react with aryl halides in the presence of formate to afford the trisubstituted alkenes[271,272]. In the reaction of the terminal alkyne 388 with two molecules of iodobenzene. the first step is the formation of the phenylacetylene 389. Then the internal alkyne bond, thus produced, inserts into the phenyl-Pd bond to give 390. Finally, hydrogenolysis with formic acid yields the trisubstituted alkene 391(273,274], This sequence of reactions is a good preparative method for trisubstituted alkenes from terminal alkynes. 

Formation of carboxylic acids ami their derivatives. Aryl and alkenyl halides undergo Pd-catalyzed carbonylation under mild conditions, offering useful synthetic methods for carbonyl compounds. The facile CO insertion into aryl- or alkenylpalladium complexes, followed by the nucleophilic attack of alcohol or water affords esters or carboxylic acids. Aromatic and a,/ -unsaturated carboxylic acids or esters are prepared by the carbonylation of aryl and alkenyl halides in water or alcohols[30l-305]. 

The intramolecular insertion of an internal alkyne into an aryl or alkenyl halide 727 generates aryl- or alkenylpalladium as an intermediate, which is trapped with an organozinc or organostannane to give 728. Overall cis addition to the alkyne takes place[595,596]. The reaction of the alkenylstannane 730 with the 2-bromomethylfuran 729 is used for the introduction of a prenyl group[597]. 

The alkylphenylacetyi chloride 843 and benzoyl chloride undergo decarbo-nylative cross-condensation to give the enone 845 in the presence of EtiNf723]. The reaction is e.xplained by the insertion of the ketene 844 into the Pd-aryl bond and, 3-elimination. To support this mechanism, o, d-unsaturuted ketones are obtained by the reaction of ketenes with aroyl chlorides[724]. 

Acyl halides are intermediates of the carbonylations of alkenes and organic-halides. Decarbonylation of acyl halides as a reversible process of the carbo-nylation is possible with Pd catalyst. The decarbonylation of aliphatic acid chlorides proceeds with Pd(0) catalyst, such as Pd on carbon or PdC, at around 200 °C[109,753]. The product is a mixture of isomeric internal alkenes. For example, when decanoyl chloride is heated with PdCF at 200 C in a distillation flask, rapid evolution of CO and HCl stops after I h, during which time a mixture of nonene isomers was distilled off in a high yield. The decarbonylation of phenylpropionyl chloride (883) affords styrene (53%). In addition, l,5-diphenyl-l-penten-3-one (884) is obtained as a byproduct (10%). formed by the insertion of styrene into the acyl chloride. Formation of the latter supports the formation of acylpalladium species as an intermediate of the decarbonylation. Decarbonylation of the benzoyl chloride 885 can be carried out in good yields at 360 with Pd on carbon as a catalyst, yielding the aryl chloride 886[754]. 

Isocyanide is isoelectronic with CO and a reactive compound in the presence of Pd catalysts. The heterobicyclic compound 127 is obtained by the successive insertion of 2.6-xylyl isocyanide (126) into the Pd-hydride bond formed from the hydrosilane[121. Aryl isocyanide inserts into the Si—Si bond in oligo-silanes. For example, 3 mol of 2,6-xylyl isocyanide insert into the tetrasilane 128 to give 129[122],... 

The insertion of calcium atoms into vinyl and aryl carbon-fluorine bonds has been reported Only the resulting organometallic from the aryl derivatives appears to live long enough to be trapped by water [J]... 

Allenols can be converted into terminal vinylepoxides by a Pd(0)-catalyzed insertion of aryl or vinyl halides [81]. The reactions take place with high trans-selectivity and in good yields (Scheme 9.17a). Chiral 2,3-allenols, which can be easily... 

---