Inorganic composition

Ogomi, D., Serizawa, T. and Akashi, M. (2003) Bioinspired organic-inorganic composite materials prepared by an alternate soaking process as a tissue reconstitution matrix. Journal of Biomedical Materials Research, 67A, 1360-1366. 

Sol-gel technique is particularly interesting due to possibility of the organic-inorganic composite material production, which porous structure ensures high solid<->liquid and solid<->gas contact surface. 

Hou L., Menning M., Schmidt H., Improvement of photofatigue resistance of spirooxazine entrapped in organic-inorganic composite synthesized via sol-gel process, SPIE Proc. 2288, 328-339, (1994). 

Vegetati ve Burning (fine particles) slash field RWCc Urban Impact 0.83 0.16 1.07 0.15 0.57 0.12 Particle Size and Inorganic Composition... 

A variety of physical, chemical and biogeochemical processes had worked in concert to alter the organic and inorganic composition of particulate and dissolved organic matter as it was transported through the water column (Figure 5). 

This type of extraction can be carried out in two different ways. A soil sample can be brought into the laboratory and extracted with relatively large amounts of water to try to determine its inorganic composition. The water-to-soil ratio can be either on a mass-to-mass basis or a volume-to-mass ratio. A one-to-one ratio is commonly used, although other ratios have been used. After a designated extraction time, with or without shaking, water is filtered from the soil and analyzed. A typical water extraction of soil is given in Procedure 11.1. 

Chapter 11 - In work the synthesis technology of zinccontaining polymer - inorganic composite on the basis of products of secondary raw material processing at joint precipitating with carbamide and formaldehyde (ZnCFO) is described. 

Key words Polymer-inorganic composite Vulcanization active component Elastomeric composition Vulcanization Morphological structure Physical-mechanical properties. 

That is, the analysis of the received results, has shown an opportunity of equal-mass replacement of the traditional activator - zinc oxide on the new polymer - inorganic composite (5,0 phr) at maintenance of a high activation level of sulfur vulcanization process of rubber mixes on the basis of diene isoprene rubber and improvement of the physical-mechanical properties complex of their vulcanizates. 

Some Ranges in the Inorganic Composition of Normal Human... 

The question as to whether there are significant inter-individual differences in normal animals or human beings with respect to the inorganic composition of bone has apparently never been seriously studied. 

In a recent study involving the inorganic analysis of human ribs from 10 subjects,66 it has been found that the calcium content varied from 24.12 to 26.91 per cent, the phosphorus from 10.75 to 12.11 per cent, and the carbonate as carbon dioxide varied from 2.81 to 3.95 per cent. Inter-individual differences of this magnitude would seem to exist since the inorganic composition of bone is probably relatively stable and not subject to short-term fluctuations. 

Carbon-based nanocomposite concepts have been successfully developed to limit or reduce these adverse effects and at the same time enhance the electron or ion transport [8]. CNT is an ideal building block in the carbon-inorganic composite/hybrid due to its mechanical, physical, chemical properties as mentioned above. CNTs are apparently superior to other carbonaceous materials such as graphite or amorphous carbon and are more adaptable to the homogeneous dispersion of nanoparticles than other carbonaceous materials [36],... 

Miyafuji, H. and Saka, S. (1996). Wood-inorganic composites prepared by the sol-gel process V. Fire-resisting properties of the SiO,-P,Oc-B,Oo wood-inorganic composites. Mokuzai Gakkaishi,... 

---