Industrial lubricant design

The lower cost dialkyl benzenes are used in a wide variety of industrial and metalworking products. In particular, their sulphur-free chemistry has led to extensive use as rolling and drawing oils for copper. The synthesised alkyl benzenes, even when their chemistry is optimised, generally exhibit poorer properties than PAOs. However, their excellent solvency and low pour point make them suitable for lubricants designed for extremely low-temperature operations in arctic greases, gear oils, hydraulic and power transmission fluids. 

Comite des Constructeurs d Automobiles du Marche Commun represents joint industry opinion on factors such as lubricant specifications, emissions, vehicle design and safety standards. With regard to crankcase lubricants, CCMC defines sequences of engine tests, and the tests themselves are defined by CEC (Coordinating European Committee for the Development of Performance Tests for Lubricants and Engine Euels a joint body of the oil and motor industries). 

The maximum compression ratio (ratio of outlet to inlet pressure) for compressors depends on the design of the machine, the properties of the lubricating oil used in the machine, the ratio of heat capacities of the gas(Cp/Cy = y), other properties of the gas (e.g. tendency to polymerize when heated), and the inlet temperature. The most common types of compressor used for gas compression in the process industries are ... 

Health, Safety, and Accident Management in the Chemical Process Industries, Ann Marie Flynn and Louis Theodore Plantwide Dynamic Simulators in Chemical Processing and Control, William L. Luyben Chemical Reactor Design, Peter Harriott Catalysis of Organic Reactions, edited by Dennis G. Morrell Lubricant Additives Chemistry and Applications, edited by Leslie R. Rudnick... 

The Chemithon Corporation has patented a novel venture reactor.34,35 The organic to be sul-fonated is injected into a stream of gas containing S03 at a venture. The reaction mixture is quenched and recycled downstream until sulfonation is complete. The reactor design can be used for highly viscous, high molecular weight specialty surfactants for industrial applications such as lubrication oil additives. 

---