Industrial data making

A comparison with industrial data shows that the kinetic data from Table 7.5 gives somewhat conservative results. The temperature should be raised to more than 550 °C to achieve conversions of about 50%. It is known that modern processes operate at much lower temperatures and make use of initiators. To obtain more realistic results the pre-exponential factor for the pyrolysis reaction was modified to 1.14 x 1014, while the pre-exponential factor of the acetylene production increased to 5 x 10+14. The reactions (23) to (25) were neglected, while the reactions (26) to (31) were accounted for by a stoichiometric approach. 

Rosack, J. (2007, February 2). Lilly to pay out millions to settle lawsuits over Zyprexa Thousands of claims against a pharmaceutical giant are aimed at forcing the industry to make public all data available on the safety and efficacy of medications. Psychiatric News, p. 1. 

After exposure to benzene, several factors determine whether harmful health effects will occur and if they do, what the type and severity of these health effects might be. These factors include the amount of benzene to which you are exposed and the length of time of the exposure. Most data involving effects of long-term exposure to benzene are from studies of workers employed in industries that make or use benzene. These workers were exposed to levels of benzene in air far greater than the levels normally encountered by the general population. Current levels of benzene in workplace air are much lower than in the past. Because of this reduction, and the availability of protective equipment such as respirators, fewer workers have symptoms of benzene poisoning. 

Require that the industrial partner make significant intellectual contributions to the university in the form of access to technology and data useful for departmental research that would otherwise be prohibitive because of cost or proprietary reasons. 

In the mechanistic studies conducted by Horn et al.,64 methane CPO reactions were run under as close to industrial conditions as possible. A high-resolution (=300/rm) spatial profiling technique was developed to measure the temperature and species profiles along the centerline of the catalyst bed. The unprecedented high-resolution data make it possible to accurately speculate reactions occurring along the catalyst bed (10mm) in a very short contact time. It was revealed that for Rh-supported CPO catalysts, H2 and CO are formed in both the initial 0-2-mm... 

Using the supposedly efficient numerical algorithm, the model equations with the operating and design parameters of the industrial unit are solved and the output is compared with the output of the industrial unit. It is not unusual even with the utmost care in model formulation, choice of the physico-chemical parameters and the use of an accurate solution algorithm, that the predictions of the model differ from the industrial data. Blind empirical fitting using one or more adjustable parameters will make the model lose almost all its... 

On the basis of these studies it is possible to make an assumption that the sorption of cationic blue dye on carbonate rocks, as well as on cellulosic sorbent is a spontaneous process, but the sorption process is rather complex. The obtained data make it possible to develop affordable, efficient, and enviromnentally friendly methods of industrial wastewaters treatment. 

Lipps, Jere H. What, if Anything, Is Micropaleontology Paleobiology 7, no. 2 (Spring, 1981) 167-199. Defines the subject, covers its history and application to industry, and makes suggestions for new applications of micropaleontological data. 

---