Nitrides hydrogen

Hydrotreating and Hydrogenation. - Nitride and oxynitride catalysts have been extensively investigated as catalysts for hydrotreating (in particular hydronitrogenation and hydrodesulfurisation) and hydrogenation (for CO, aromatics, crotonaldehyde and alkenes ° the reduction of NO with H2 has been covered in the previous section). 

Fluid-solid reactions include thermal decomposition of minerals, roasting (oxidation) of sulfide ores, reduction of metal oxides with hydrogen, nitridation of metals, and carburization of metals. Each t3 e of reaction will be discussed finm the thermodynamic point of view. Then reaction kinetics for all of the various rate determining steps in fluid-sohd reactions will be discussed for two general models shrinking core and shrinking particle. 

Hydrogen nitride—VotatUe adtali—NH,—Afo/eewtor loeight n—Sp. 

Chang, M., Wong, J., and Wang, D., Low Stress, Low Hydrogen Nitride Deposition, Solid State Technol., pp. 193-195 (May 1988)... 

B1.29.6 HIGH-PRESSURE FORMS OF FAMILIAR OR USEFUL MATERIALS DIAMOND, FLUID METALLIC HYDROGEN, METALLIC OXYGEN, IONIC CARBON DIOXIDE, GALLIUM NITRIDE... 

Hafnium has been successfully alloyed with iron, titanium, niobium, tantalum, and other metals. Hafnium carbide is the most refractory binary composition known, and the nitride is the most refractory of all known metal nitrides (m.p. 3310C). At 700 degrees C hafnium rapidly absorbs hydrogen to form the composition HfHl.86. 

Hafnium begins to react with nitrogen at about 900°C to form a surface nitride film, and reacts rapidly with hydrogen at about 700°C to form hydrides (qv). The hydrogen diffuses rapidly and converts the bulk metal into the brittle hydride. 

Calcium hydride is highly ionic and is insoluble in all common inert solvents. It can be handled in dry air at low temperatures without difficulty. When heated to about 500°C, it reacts with air to form both calcium oxide and nitride. Calcium hydride reacts vigorously with water in either Hquid or vapor states at room temperature. The reaction with water provides 1.06 Hters of hydrogen per gram CaH2. 

Plasma-deposited siUcon nitride contains large amounts of hydrogen, typically in the range of 20—25 atomic % H, and has polymer-like properties. The electrical resistivity of the film depends on the deposition temperature, the film stoichiometry, and the amounts of hydrogen and oxygen in the film. 

The reaction of hydrogen and lithium readily gives lithium hydride [7580-67-8], LiH, which is stable at temperatures from the melting poiat up to 800°C. Lithium reacts with aitrogea, evea at ordiaary temperatures, to form the reddish browa nitride, Li3N. Lithium bums when heated in oxygen to... 

In a vacuum, uncoated molybdenum metal has an unlimited life at high temperatures. This is also tme under the vacuum-like conditions of outer space. Pure hydrogen, argon, and hehum atmospheres are completely inert to molybdenum at all temperatures, whereas water vapor, sulfur dioxide, and nitrous and nitric oxides have an oxidizing action at elevated temperatures. Molybdenum is relatively inert to carbon dioxide, ammonia, and nitrogen atmospheres up to about 1100°C a superficial nitride film may be formed at higher temperatures in the latter two gases. Hydrocarbons and carbon monoxide may carburize molybdenum at temperatures above 1100°C. 

Sihcon carbide is comparatively stable. The only violent reaction occurs when SiC is heated with a mixture of potassium dichromate and lead chromate. Chemical reactions do, however, take place between sihcon carbide and a variety of compounds at relatively high temperatures. Sodium sihcate attacks SiC above 1300°C, and SiC reacts with calcium and magnesium oxides above 1000°C and with copper oxide at 800°C to form the metal sihcide. Sihcon carbide decomposes in fused alkahes such as potassium chromate or sodium chromate and in fused borax or cryohte, and reacts with carbon dioxide, hydrogen, ak, and steam. Sihcon carbide, resistant to chlorine below 700°C, reacts to form carbon and sihcon tetrachloride at high temperature. SiC dissociates in molten kon and the sihcon reacts with oxides present in the melt, a reaction of use in the metallurgy of kon and steel (qv). The dense, self-bonded type of SiC has good resistance to aluminum up to about 800°C, to bismuth and zinc at 600°C, and to tin up to 400°C a new sihcon nitride-bonded type exhibits improved resistance to cryohte. 

The reverse reaction to ammonia synthesis, the decomposition to nitrogen and hydrogen, is used in die nitriding of iron and canied out industiially at temperatures around 800 K and atmospheric pressure to produce surfacehardening. This dissolution reaction must also play a part in the synthesis of ammonia by the industiial process. The attempt to ninide non by reaction with nin ogen gas is vety slow under atmospheric pressure, presumably due to the stability of the nitrogen molecule. 

---